cryptoyes
Member
Offline
Activity: 297
Merit: 10
|
|
March 13, 2019, 03:05:22 AM Last edit: March 13, 2019, 03:47:08 AM by cryptoyes |
|
Grin C31 (rigs with 13 gpus, but also rigs with 7 gpus). I see that 15.3.1 is trying to automatically set CPU intensity based on number of GPUs. Sadly, it's still much slower on pool side than 15.1.0. I have 13 gpus per rig, mostly gtx1070, G3930 CPU, ubuntu 16.04, nvidia 415.27, cuda10. bminer 15.3.1 sets intensity to 13. The reported hashrate by 15.3.1 is about 5-10% higher than 15.1.0, but it's lying through its teeth ... on pool side it's about 15-30% slower than 15.1.0. Something is not right here!Even on a rig with only 7 GPUs 1080Ti (where it keeps intensity at 6), the pool hashrate is also much lower! For example The last good version for me was 15.1.0. All versions afterwards have severely degraded performance in my case .
|
|
|
|
|
|
|
In order to get the maximum amount of activity points possible, you just need to post once per day on average. Skipping days is OK as long as you maintain the average.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
realbminer (OP)
|
|
March 13, 2019, 03:23:05 AM |
|
Grin C31 (rigs with 13 gpus, but also rigs with 7 gpus).
I see that 15.3.1 is trying to automatically set CPU intensity based on number of GPUs. Sadly, it's still much slower on pool side than 15.1.0. I have 13 gpus per rig, mostly gtx1070, G3930 CPU, ubuntu 16.04, nvidia 415.27, cuda10. bminer 15.3.1 sets intensity to 13.
The reported hashrate by 15.3.1 is about 5-10% higher than 15.1.0, but it's lying through its teeth ... on pool side it's about 15-30% slower than 15.1.0. Something is not right here!
Even on a rig with only 7 GPUs 1080Ti (where it keeps intensity at 6), the pool hashrate is also much lower.
The last good version for me was 15.1.0. All versions afterwards have severely degraded performance.
may I ask which pool when you doing the test please?
|
When Crypto-mining Made Fast. @realbminer on TWTR
|
|
|
cryptoyes
Member
Offline
Activity: 297
Merit: 10
|
|
March 13, 2019, 03:45:55 AM |
|
Grin C31 (rigs with 13 gpus, but also rigs with 7 gpus).
I see that 15.3.1 is trying to automatically set CPU intensity based on number of GPUs. Sadly, it's still much slower on pool side than 15.1.0. I have 13 gpus per rig, mostly gtx1070, G3930 CPU, ubuntu 16.04, nvidia 415.27, cuda10. bminer 15.3.1 sets intensity to 13.
The reported hashrate by 15.3.1 is about 5-10% higher than 15.1.0, but it's lying through its teeth ... on pool side it's about 15-30% slower than 15.1.0. Something is not right here!
Even on a rig with only 7 GPUs 1080Ti (where it keeps intensity at 6), the pool hashrate is also much lower.
The last good version for me was 15.1.0. All versions afterwards have severely degraded performance.
may I ask which pool when you doing the test please? I'm counting accepted shares within a given time window - this is the same as the pool does. I've been using Luxor pool with a fixed difficulty of 10 (append "+10" to the username in order to set share difficulty). Speed is computed as 42 * nShares * 10 / timeInterval (the pool does the same calculation). All versions after 15.1.0 have lowered performance in my case.
|
|
|
|
Vadisss
Newbie
Offline
Activity: 12
Merit: 0
|
|
March 13, 2019, 05:43:56 AM Last edit: March 13, 2019, 06:00:41 AM by Vadisss |
|
New miners are capturing more and more of the paging file, so they are writing from different people:
[INFO] [2019-03-10T23:06:53-07:00] Failed to initialize CUDA. Try to initialize AMD platform [FATA] [2019-03-10T23:06:53-07:00] Failed to initialize the AMDCL platform: Unknown (3): Failed to load library atiadlxx.dll
[FATA] [2019-03-10T13:18:09+01:00] CudaError: Unknown error: c:\windows\system32\user32.dll [WARN] [2019-03-10T13:18:09+01:00] Miner died! It will be restarted soon...
[FATA] [2019-03-10T13:08:09+06:00] CudaError: Unknown error: c:\windows\system32\uxtheme.dll [WARN] [2019-03-10T13:08:09+06:00] Miner died! It will be restarted soon...
You're going the wrong way.
|
|
|
|
realbminer (OP)
|
|
March 13, 2019, 06:53:13 AM |
|
New miners are capturing more and more of the paging file, so they are writing from different people:
[INFO] [2019-03-10T23:06:53-07:00] Failed to initialize CUDA. Try to initialize AMD platform [FATA] [2019-03-10T23:06:53-07:00] Failed to initialize the AMDCL platform: Unknown (3): Failed to load library atiadlxx.dll
[FATA] [2019-03-10T13:18:09+01:00] CudaError: Unknown error: c:\windows\system32\user32.dll [WARN] [2019-03-10T13:18:09+01:00] Miner died! It will be restarted soon...
[FATA] [2019-03-10T13:08:09+06:00] CudaError: Unknown error: c:\windows\system32\uxtheme.dll [WARN] [2019-03-10T13:08:09+06:00] Miner died! It will be restarted soon...
You're going the wrong way.
I have replied you once, we are working on fix it. please be patient.
|
When Crypto-mining Made Fast. @realbminer on TWTR
|
|
|
realbminer (OP)
|
|
March 13, 2019, 07:24:55 AM |
|
Grin C31 (rigs with 13 gpus, but also rigs with 7 gpus).
I see that 15.3.1 is trying to automatically set CPU intensity based on number of GPUs. Sadly, it's still much slower on pool side than 15.1.0. I have 13 gpus per rig, mostly gtx1070, G3930 CPU, ubuntu 16.04, nvidia 415.27, cuda10. bminer 15.3.1 sets intensity to 13.
The reported hashrate by 15.3.1 is about 5-10% higher than 15.1.0, but it's lying through its teeth ... on pool side it's about 15-30% slower than 15.1.0. Something is not right here!
Even on a rig with only 7 GPUs 1080Ti (where it keeps intensity at 6), the pool hashrate is also much lower.
The last good version for me was 15.1.0. All versions afterwards have severely degraded performance.
may I ask which pool when you doing the test please? I'm counting accepted shares within a given time window - this is the same as the pool does. I've been using Luxor pool with a fixed difficulty of 10 (append "+10" to the username in order to set share difficulty). Speed is computed as 42 * nShares * 10 / timeInterval (the pool does the same calculation). All versions after 15.1.0 have lowered performance in my case. we will check and get back to you
|
When Crypto-mining Made Fast. @realbminer on TWTR
|
|
|
|
garetjax
Member
Offline
Activity: 150
Merit: 10
|
|
March 13, 2019, 03:29:35 PM |
|
Are you still supporting 1060 cards? 15.02 was the last good performing version.
|
|
|
|
Keko Fdez
Jr. Member
Offline
Activity: 108
Merit: 7
|
|
March 14, 2019, 09:53:45 AM |
|
Tried Bminer 15.3.0 and 15.3.1 mining Grin (Cuckoo 29). I have 6 GTX 1070 Ti and I am getting 32.7 G/s on the miner but only 27.5 average on the pool side.
Your miner over reads way too much in the console and underperforms. As far as I can see on previous post I am not the only one with the same problem... maybe you could fix it and use real hash values on the console?
|
|
|
|
realbminer (OP)
|
|
March 14, 2019, 12:42:27 PM Last edit: March 14, 2019, 02:05:15 PM by realbminer |
|
Tried Bminer 15.3.0 and 15.3.1 mining Grin (Cuckoo 29). I have 6 GTX 1070 Ti and I am getting 32.7 G/s on the miner but only 27.5 average on the pool side.
Your miner over reads way too much in the console and underperforms. As far as I can see on previous post I am not the only one with the same problem... maybe you could fix it and use real hash values on the console?
May I ask which pool? also ,it would be great if you can send the log to me. thanks!
|
When Crypto-mining Made Fast. @realbminer on TWTR
|
|
|
realbminer (OP)
|
|
March 14, 2019, 12:44:51 PM |
|
Are you still supporting 1060 cards? 15.02 was the last good performing version.
May I ask if you mean there is error such as XXX.dll so the miner is not working at all or you mean that the miner works but the performance is not as good as the performance by Bminer 15.0.2? thanks!
|
When Crypto-mining Made Fast. @realbminer on TWTR
|
|
|
hustleman
Jr. Member
Offline
Activity: 155
Merit: 6
|
|
March 16, 2019, 03:51:05 AM |
|
Is the performance rating on bminer.me for 1070 mining beam really for a 1070Ti??? cause my 1070s are right aroung 17 sols per card using 15.3.1. What is listed is 21 sols per card.
|
|
|
|
N2DCRYPT
Jr. Member
Offline
Activity: 148
Merit: 5
|
|
March 16, 2019, 05:32:24 PM |
|
Any planned support for C31 mean mining on AMD cards? Have polaris pro duos, Vega FEs, and Radeon VII's that would fit the bill in terms of mem size.
|
|
|
|
hustleman
Jr. Member
Offline
Activity: 155
Merit: 6
|
|
March 17, 2019, 03:15:01 PM |
|
What am I doing wrong while mining BEAM (15.3.1v on leafpool) with 10 EVGA 1070 superclocked and superclocked 2s??? I have afterburner settings at 81 powerlimit +84 core and +500 memory and only obtaining 17 sols per card. The performance rating shown says 21 sols for 1070s.
|
|
|
|
iRonNuke
Jr. Member
Offline
Activity: 98
Merit: 6
|
|
March 17, 2019, 03:41:09 PM |
|
Any planned support for C31 mean mining on AMD cards? Have polaris pro duos, Vega FEs, and Radeon VII's that would fit the bill in terms of mem size.
Yes I would like to see that, too.
|
|
|
|
Digital_Seytan
Jr. Member
Offline
Activity: 222
Merit: 2
digiseytan@walletofsatoshi.com
|
|
March 17, 2019, 04:26:02 PM |
|
Last version off this Bminer verry slow and works verry bad with Eth mining
|
DonateSATS:Digiseytan@WALLETOFSATOSHi.COM SHOPFREE: https://satsback.com/register/1QEJyGPlg4LN5kwx ETC+Zil Pool:https://k1pool.com/invite/895eb07555
|
|
|
stzcze
Jr. Member
Offline
Activity: 109
Merit: 1
|
|
March 17, 2019, 08:35:49 PM |
|
What am I doing wrong while mining BEAM (15.3.1v on leafpool) with 10 EVGA 1070 superclocked and superclocked 2s??? I have afterburner settings at 81 powerlimit +84 core and +500 memory and only obtaining 17 sols per card. The performance rating shown says 21 sols for 1070s.
I have another experience .... I use gminer, there it is ok.
|
|
|
|
hustleman
Jr. Member
Offline
Activity: 155
Merit: 6
|
|
March 18, 2019, 03:00:04 AM |
|
What am I doing wrong while mining BEAM (15.3.1v on leafpool) with 10 EVGA 1070 superclocked and superclocked 2s??? I have afterburner settings at 81 powerlimit +84 core and +500 memory and only obtaining 17 sols per card. The performance rating shown says 21 sols for 1070s.
I have another experience .... I use gminer, there it is ok. Well that sucks... Trying to avoid gminer due to them having 2% dev fee
|
|
|
|
stzcze
Jr. Member
Offline
Activity: 109
Merit: 1
|
|
March 18, 2019, 06:59:48 AM |
|
What am I doing wrong while mining BEAM (15.3.1v on leafpool) with 10 EVGA 1070 superclocked and superclocked 2s??? I have afterburner settings at 81 powerlimit +84 core and +500 memory and only obtaining 17 sols per card. The performance rating shown says 21 sols for 1070s.
I have another experience .... I use gminer, there it is ok. Well that sucks... Trying to avoid gminer due to them having 2% dev fee Both have a dev fee of 2% for the BEAM coin
|
|
|
|
Scofield
|
|
March 18, 2019, 12:52:27 PM |
|
Cannot get bminer to work with my 6x RX580 rig. Itś running Ubuntu 16.04 with AMDGPU-PRO drivers 17.40. Getting the following errors: How to fix? Edit: I also tried the latest version (15.3.1), gives a slightly different error:
|
|
|
|
|