greaterninja
|
|
August 20, 2013, 04:45:06 PM |
|
Maciej and Tytus teamed up last night and fully checked out the latest H-boards. They work fine, so production resumes!
We are asking (demanding actually) daily, expedited shipping of whatever gets produced. Last time they "overnighted" something to Tytus it took 5 days for him to receive it. They can make about 500 boards a day.
So I expect to start shipping them next week - it will be right up against the end of the month. I'm sure a few will probably be going out first week September if I look at it realistically - but we will ship everything we have though!
Getting really excited now - I've waited a long time for this! (single tear)
Sounds good. Thank you Dave, Tytus and Maciej.
|
|
|
|
Foofighter
|
|
August 20, 2013, 04:47:05 PM |
|
Maciej and Tytus teamed up last night and fully checked out the latest H-boards. They work fine, so production resumes!
We are asking (demanding actually) daily, expedited shipping of whatever gets produced. Last time they "overnighted" something to Tytus it took 5 days for him to receive it. They can make about 500 boards a day.
So I expect to start shipping them next week - it will be right up against the end of the month. I'm sure a few will probably be going out first week September if I look at it realistically - but we will ship everything we have though!
Getting really excited now - I've waited a long time for this! (single tear)
thanks for you efforts! great news
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
americandesi
|
|
August 20, 2013, 04:50:21 PM |
|
Maciej and Tytus teamed up last night and fully checked out the latest H-boards. They work fine, so production resumes!
We are asking (demanding actually) daily, expedited shipping of whatever gets produced. Last time they "overnighted" something to Tytus it took 5 days for him to receive it. They can make about 500 boards a day.
So I expect to start shipping them next week - it will be right up against the end of the month. I'm sure a few will probably be going out first week September if I look at it realistically - but we will ship everything we have though!
Getting really excited now - I've waited a long time for this! (single tear)
This is so f****ing awesome.. Thanks dave. After a longtime, seeing a ASIC manufacturer sticking to the deadline. I don't have anything else except respect for bitfury and you. I need to get ready to receive them. P.S : How about the shipping prices.? Are they updated on the site yet.?
|
|
|
|
rsbriggs
|
|
August 20, 2013, 04:50:35 PM |
|
Boards not going from China to Tytus and then back to you, yes?
|
|
|
|
CoinHoarder
Legendary
Offline
Activity: 1484
Merit: 1026
In Cryptocoins I Trust
|
|
August 20, 2013, 04:50:54 PM |
|
I hope other ASIC companies are taking notes.
Thanks Dave for keeping us up to date!
|
|
|
|
dben428
Member
Offline
Activity: 106
Merit: 10
|
|
August 20, 2013, 04:51:45 PM |
|
Maciej and Tytus teamed up last night and fully checked out the latest H-boards. They work fine, so production resumes!
We are asking (demanding actually) daily, expedited shipping of whatever gets produced. Last time they "overnighted" something to Tytus it took 5 days for him to receive it. They can make about 500 boards a day.
So I expect to start shipping them next week - it will be right up against the end of the month. I'm sure a few will probably be going out first week September if I look at it realistically - but we will ship everything we have though!
Getting really excited now - I've waited a long time for this! (single tear)
Exciting news Dave! I'm sure you are as relieved as we are that everything is ready to go on time. Great work all involved. Your efforts are greatly appreciated.
|
|
|
|
buzzdave (OP)
VIP
Sr. Member
Offline
Activity: 472
Merit: 250
|
|
August 20, 2013, 04:54:43 PM |
|
Boards not going from China to Tytus and then back to you, yes?
No way. Boards direct to me from China
|
|
|
|
-Redacted-
|
|
August 20, 2013, 04:57:22 PM |
|
I think we're all as excited as you are! Thanks for all you are doing!
|
|
|
|
salfter
|
|
August 20, 2013, 05:07:25 PM |
|
If one were to add additional H boards - does this alter their place in the queue? Thanks.
No, your original position is never affected by later ordering. If we (ever) have enough quantity on hand to fulfill all the orders in the delivery month, we will combine shipping wherever possible. Cool. I'll most likely have another order in by the end of the week...possibly in the next day or two.
|
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
|
August 20, 2013, 05:54:23 PM |
|
Very exciting times indeed, Dave. Thank you so much for the updates !
|
|
|
|
Trongersoll
|
|
August 20, 2013, 05:58:14 PM |
|
Once i have my starter kit in hand and mining, i'll be ordering more H boards. I need a bit of reality and less gambling. No slight meant on you Dave, just afraid of getting burned... again.
|
|
|
|
bkpduke
|
|
August 20, 2013, 08:53:04 PM |
|
Dave, do you have a new CC processor in place?
|
|
|
|
arorts
|
|
August 20, 2013, 10:46:00 PM |
|
I hate to be the elephant in the room, but any word on August shipments?
I know you guys said late August, but that is approaching quite soon.
As you can see, we've hit a setback unfortunately. Luckily we identified this in time (before all chips were soldered to non-working boards). It'll take ~2 days to produce the boards, but up to 5 days to ship them to europe, so I might be going to China to test them on location to save time. We might find someone locally to do this also, but if I go there I'll be able to take some pics for you. I sincerely apologize for this delay. We're working hard to keep the delay to minimum.
Update
I've added option for UPS Express Saver shipping, and dropped the prices a bit as further october orders will most likely ship in very late october. Those who picked first october orders are likely to receive theirs in very early october, if not september.
Regarding invoices: there was a problem on the site. I will need to send invoices manually. You will get an invoice, don't worry.
I need to sleep now. Shanghai awaits tomorrow. I should have more news for you in about 30 hours.
Thats the latest. Hmmm...He probably meant adding that shipping option to the **European** site. I fail to find it in the US website. Anyone knows how to set the shipping option in the US website??
|
|
|
|
buzzdave (OP)
VIP
Sr. Member
Offline
Activity: 472
Merit: 250
|
|
August 21, 2013, 06:58:47 AM |
|
Dave, do you have a new CC processor in place?
Nope. I've been turned down by four processors. Nobody wants our money I'm working with a consultant that knows our business - she's working to position me for a merchant account that fits the business needs. Sorry for the delay.
|
|
|
|
Mobius
|
|
August 21, 2013, 07:00:29 AM |
|
Dave, do you have a new CC processor in place?
Nope. I've been turned down by four processors. Nobody wants our money I'm working with a consultant that knows our business - she's working to position me for a merchant account that fits the business needs. Sorry for the delay. Any update on shipping options?
|
|
|
|
buzzdave (OP)
VIP
Sr. Member
Offline
Activity: 472
Merit: 250
|
|
August 21, 2013, 07:07:54 AM |
|
I hate to be the elephant in the room, but any word on August shipments?
I know you guys said late August, but that is approaching quite soon.
As you can see, we've hit a setback unfortunately. Luckily we identified this in time (before all chips were soldered to non-working boards). It'll take ~2 days to produce the boards, but up to 5 days to ship them to europe, so I might be going to China to test them on location to save time. We might find someone locally to do this also, but if I go there I'll be able to take some pics for you. I sincerely apologize for this delay. We're working hard to keep the delay to minimum.
Update
I've added option for UPS Express Saver shipping, and dropped the prices a bit as further october orders will most likely ship in very late october. Those who picked first october orders are likely to receive theirs in very early october, if not september.
Regarding invoices: there was a problem on the site. I will need to send invoices manually. You will get an invoice, don't worry.
I need to sleep now. Shanghai awaits tomorrow. I should have more news for you in about 30 hours.
Thats the latest. Hmmm...He probably meant adding that shipping option to the **European** site. I fail to find it in the US website. Anyone knows how to set the shipping option in the US website?? Expedited shipping is going up tomorrow. I won't be able to accept CC for this, so get your BTC or Dwolla ready to go.
|
|
|
|
Adano
Member
Offline
Activity: 108
Merit: 10
|
|
August 21, 2013, 07:10:46 AM |
|
Watching..
|
Flatter me, and I may not believe you. Criticize me, and I may not like you. Ignore me, and I may not forgive you. Encourage me, and I will not forget you.
|
|
|
-Redacted-
|
|
August 21, 2013, 08:40:11 AM |
|
Dave, do you have a new CC processor in place?
Nope. I've been turned down by four processors. Nobody wants our money I'm working with a consultant that knows our business - she's working to position me for a merchant account that fits the business needs. Sorry for the delay. I've emailed requesting that some of my orders be converted from CC to Bitcoin payment - so I can get them paid for - but haven't heard anything back. Kat really busy?
|
|
|
|
dracore
Member
Offline
Activity: 111
Merit: 10
|
|
August 21, 2013, 02:31:23 PM |
|
What PSU is everyone going to use?
|
|
|
|
cet
Member
Offline
Activity: 100
Merit: 10
|
|
August 21, 2013, 02:35:18 PM |
|
What PSU is everyone going to use?
I've got a corsair CX500 ready to run my rig. /cet
|
|
|
|
|