hsrminer - Nvidia mining software for various algos by palgin&alexkap

[nalin503]

Hi
    When i get home I'll try
                                         

   thank you

[melpheos]

Side node, if you set "off" for P2 state on profile inspector, the miner will crash with an illegal instruction error.
Not a big deal but worth mentionning

P0 makes higher base clocks, so you must make lower clock with OC

I'll check that after work. Didn't knew that

edit : well unfortunately in P0 state i get a lot of bad share even wtihout any o/c. I'll stick with my current settings.

[Dr_Victor]

How can you present so raw version, palgin? I spent 30 min trying to run it on gtx 1080ti - with dozen different parameters, and the result is memory error!

[topteam]

linux please

+1

+1 

[abudfv2008]

How can you present so raw version, palgin? I spent 30 min trying to run it on gtx 1080ti - with dozen different parameters, and the result is memory error!

You just have to read the thread. The reason is old drivers. You need latest 388.xx version.

[Dr_Victor]

How can you present so raw version, palgin? I spent 30 min trying to run it on gtx 1080ti - with dozen different parameters, and the result is memory error!

You just have to read the thread. The reason is old drivers. You need latest 388.xx version.

Are you kidding me? I have the latest 388.71!

[melpheos]

How can you present so raw version, palgin? I spent 30 min trying to run it on gtx 1080ti - with dozen different parameters, and the result is memory error!

It's working for almost everyone. Have you tried without intensity parameter ?

[wolverine5pl]

WOW instead of 2.2kh im getting 2.8

[Elder III]

How can you present so raw version, palgin? I spent 30 min trying to run it on gtx 1080ti - with dozen different parameters, and the result is memory error!

It's working for almost everyone. Have you tried without intensity parameter ?

How big is your page file?

If you post a screenshot of the miner with the error message then there's a better chance that someone can identify the problem and the fix for you.

[car1999]

WOW instead of 2.2kh im getting 2.8

what's your GPU and power/oc settings?
I get 1.7kh/s ,1080ti 200watts, cc+100,mc+100.

[malthrax]

WOW instead of 2.2kh im getting 2.8

with two GPUs, right?

[malthrax]

Please add a flag to set the number of stratum connection retries before exiting the miner if a stratum connection fails/dies - I'd like to use this version in an automation script, but there's no clean way to shut it down

Just need a "--retries=###" type command-line parameter

[apiontek]

Please add a flag to set the number of stratum connection retries before exiting the miner if a stratum connection fails/dies - I'd like to use this version in an automation script, but there's no clean way to shut it down

Just need a "--retries=###" type command-line parameter

Seconded.

And/or, if you could make sure the output is unbuffered. I run my miners in a python script with subprocess.popen() and pipe stdout, which helps me watch for disconnects. This works with cli apps that don't buffer their output, and on linux, it works with everything since I can prepend "stdbuf -o0" to force unbuffered stdout ... but on Windows, the process just hangs until enough connection errors mount up to fill the buffer. Then I can catch the error and kill the program, but if it just had a control for # of retries, and/or didn't buffer stdout, I could use it.

[Dr_Victor]

How can you present so raw version, palgin? I spent 30 min trying to run it on gtx 1080ti - with dozen different parameters, and the result is memory error!

It's working for almost everyone. Have you tried without intensity parameter ?

INFO : [09:02:02] : Securing devfee mining...
 INFO : [09:02:02] : Dev_Main OK.
 INFO : [09:02:03] : Dev_Backup OK.
 INFO : [09:02:03] : Dev pools checked, at least 1 accessible, continue...
 INFO : [09:02:03] : POOL: stratum+tcp://eu1.altminer.net:10000
 INFO : [09:02:03] : MESSAGE FROM SERVER: welcome on ALTMINER.NET - happy mining!
 INFO : [09:02:03] : Checking for NVML...
 INFO : [09:02:03] : NVML monitoring enabled, continue...
 INFO : [09:02:03] : 8 GPUs found/specified, initializing miner...
 INFO : [09:02:11] : Share difficulty reset -- 64 (0.00098)
 INFO : [09:02:11] : New block #26553 received, new difficulty is 1559.057
Cuda error in func 'neoscrypt_cpu_init' at line 1352 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1352 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.
Cuda error in func 'neoscrypt_cpu_init' at line 1351 : out of memory.

[dragonmike]

Current testing speeds(Neoscrypt):

1080 - 1280-1300 kh/s (non-OC)

I'd be interested to know how you achieved these figures. I had a dry test run on my PC sporting a (water-chilled) 1080, and I achieved just over 1300kh/s... but at clocks beyond what you could get on any water-cooled let alone an air-cooled setup. I did set 12Gigs of virtual mem as well.

Would be interested to know what parameters you set to claim 1300kh/s at "stock" clocks on a 1080.

Using the test neoscrypt test-version.

[ironkid]

I would suggest you set your memory to P0 state. My hashrate with 1080ti went from 1500 to 1700 by just doing that. Also try tweaking the Intensity a bit.

I hope palgin can work on X17 and blake2s at some point. His old miner is still the best free version in those Im sure he can reach SP levels

[wolverine5pl]

WOW instead of 2.2kh im getting 2.8

what's your GPU and power/oc settings?
I get 1.7kh/s ,1080ti 200watts, cc+100,mc+100.

1080ti - 1.7 75% PDU +130/+500
1070 - 1.1 90% PDU +140/+500

[igotek]

I would suggest you set your memory to P0 state. My hashrate with 1080ti went from 1500 to 1700 by just doing that. Also try tweaking the Intensity a bit.

I hope palgin can work on X17 and blake2s at some point. His old miner is still the best free version in those Im sure he can reach SP levels

How could I set P0 state ?

[car1999]

WOW instead of 2.2kh im getting 2.8

what's your GPU and power/oc settings?
I get 1.7kh/s ,1080ti 200watts, cc+100,mc+100.

1080ti - 1.7 75% PDU +130/+500
1070 - 1.1 90% PDU +140/+500

I'll try to increase memory speed, how do you get it +500 for 1080ti? My cards crash above +200.

[melpheos]

I would suggest you set your memory to P0 state. My hashrate with 1080ti went from 1500 to 1700 by just doing that. Also try tweaking the Intensity a bit.

I hope palgin can work on X17 and blake2s at some point. His old miner is still the best free version in those Im sure he can reach SP levels

How could I set P0 state ?

Disable all O/C first then run nvidia profile inspector and under the line force P2 state set it to off and reboot.
Unfortunately, in my case, this resulted in same hashrate but very high bad shares.