hsrminer - Nvidia mining software for various algos by palgin&alexkap

[Reckle55]

Can I get a little help with this error.

PS>TerminatingError(Get-Content): "The running command stopped because the preference variable "ErrorActionPreference" or common parameter is set to Stop: Cannot find path 'D:\xxxxxxxxxxxxx\MultiPoolMinerV2.7.1.2\Wrapper\23333.txt' because it does not exist.

The file exists (it contains numbers only) so my hunch is I need to tell hsrminer where the 'path' is ?

Thanks

[pfft]

all done for me the miner works from 1.5 days without any problem, thx !

[Jsorrentino]

Can you add the ccminer.exe -r 0 arguments for multipool mining?

Thanks!

[Miner2525]

Please prioritize USABILITY over adding superfluous new algos.  Specifically, need -R x support where x is 0 to whatever seconds to wait before retrying.  0 should result in an exit.  As for now, completely unsuable and no dev fee for you until you fix this. 

[jugger1028]

Has anyone tested the hash rate to see if they are real and not just fake exaggerated output? For a miner that has an issue with dropping to 0% gpu usage, it seems difficult to believe that it's getting a 10-20% gain over all other miners. I've tested the power usage compared to CCMiner and it seems the same, don't know how to test the hashrate to see if it's fake though. I guess the only way would be to run 2 same cards side by side using two different mining programs on the same coin/pool and see the results. Anyone give that a try?

[alarmod]

Speed on https://www.altminer.net over 3% less then miner show. 1% - dev fee, 2% - within the margin of error.

[phelixster]

Hi,
Just to thanks for your hardwork,
I using ccminer for neoscrypt with single 1060 6gb running 580kh/s hashrate.. after changing to this.. i've got 760kh/s!

[jugger1028]

Speed on https://www.altminer.net over 3% less then miner show. 1% - dev fee, 2% - within the margin of error.

Sorry, I didn't understand this, can you elaborate?

[alarmod]

Speed in hsrminer is real. Deviations reason only - errors in the pools side...

[melpheos]

Speed on https://www.altminer.net over 3% less then miner show. 1% - dev fee, 2% - within the margin of error.

On unimining i get between 16200 to 17500 (more frequently around 17100)
Direct calculation is 17800.
In any case with other miners i get less than 16000 calculated on the pool so it's still a plus

[jugger1028]

You get more according to what's reported on the screen, but how do you know those numbers are real... Sorry Alarmod, but someone just saying they're real doesn't make it so, who has the proof? That's what I'm asking..

[alarmod]

Now i mine SPARKS:
http://bsod.pw/?address=GHsDJKpjAFqLZGdBXGioekTg27WRkUBo42

Rigs:
alarmod - 1 x Geforce 1060 - 897 kH in miner
katana   - 3 x Geforce 1070 and 1 x Geforce 1080 Ti - 5624 kH in miner
neuro    - 2 x Geforce 1080 Ti - 4018 kH in miner
oldest    - 1 x Geforce 1060 - 891 kH in miner
server    - 2 x Geforce 1060 - 1762 kH in miner

Total in miners: 897 + 5624 + 4018 + 891 + 1762 = 13192 kH

Start mine on this pool hour ago..

[jugger1028]

Now i mine SPARKS:
http://bsod.pw/?address=GHsDJKpjAFqLZGdBXGioekTg27WRkUBo42

Rigs:
alarmod - 1 x Geforce 1060 - 897 kH in miner
katana   - 3 x Geforce 1070 and 1 x Geforce 1080 Ti - 5624 kH in miner
neuro    - 2 x Geforce 1080 Ti - 4018 kH in miner
oldest    - 1 x Geforce 1060 - 891 kH in miner
server    - 2 x Geforce 1060 - 1762 kH in miner

Total in miners: 897 + 5624 + 4018 + 891 + 1762 = 13192 kH

Start mine on this pool hour ago..

Again, you're only showing what the miner is telling you but how do you know those numbers are real?

[alarmod]

Will check pool stat - see my link http://bsod.pw/?address=GHsDJKpjAFqLZGdBXGioekTg27WRkUBo42

[Jsorrentino]

I have a couple gtx 980 cards, will support for these be added?

[alarmod]

Will check pool stat - see my link http://bsod.pw/?address=GHsDJKpjAFqLZGdBXGioekTg27WRkUBo42

Speed on pool ~ 12800 kH/sec - 97,03%

I'll switch to another coin

[xTommYx]

Will check pool stat - see my link http://bsod.pw/?address=GHsDJKpjAFqLZGdBXGioekTg27WRkUBo42

Speed on pool ~ 12800 kH/sec - 97,03%

I'll switch to another coin

Can you share your 1080ti OC settings?

[alarmod]

2 x EVGA GeForce GTX 1080 Ti FTW3 GAMING:
Core Voltage +0
Power Limit 105%
Temp Limit 73
Core Clock +50
Memory Clock +700

1 x Zotac GeForce GTX 1080 Ti Mini:
Core Voltage +0
Power Limit 105%
Temp Limit 73
Core Clock +180
Memory Clock +700

Memory clock above just did not try... That's enough  

[melpheos]

Now i mine SPARKS:
http://bsod.pw/?address=GHsDJKpjAFqLZGdBXGioekTg27WRkUBo42

Rigs:
alarmod - 1 x Geforce 1060 - 897 kH in miner
katana   - 3 x Geforce 1070 and 1 x Geforce 1080 Ti - 5624 kH in miner
neuro    - 2 x Geforce 1080 Ti - 4018 kH in miner
oldest    - 1 x Geforce 1060 - 891 kH in miner
server    - 2 x Geforce 1060 - 1762 kH in miner

Total in miners: 897 + 5624 + 4018 + 891 + 1762 = 13192 kH

Start mine on this pool hour ago..

Again, you're only showing what the miner is telling you but how do you know those numbers are real?

What do you want him to do ? Show the code ? That's the point of a closed miner.
He is not forcing you to use it.
What I see is that over 24 hours my average hashrate on the pool is higher than with other miners. That's good enough for me

[cryptominer420]

@palgin
Want to include the miner in my Zpool GUI Miner but as it is closed source and I do not see licensing information. I just want to ask your permission to include it.