firsttimeuser
|
|
October 07, 2013, 10:42:12 PM |
|
Yeah - and they have decent charts. let me set up a couple of accounts and switch over to them....
Also I know its basically negligible but they do pooled mining or w/e the hell its called where you get NMC's its like nothing but putting them on an exchange we get a tiny bit of BTC to help out with the ROI. adding NMC is aprox +2%
|
|
|
|
-Redacted-
|
|
October 07, 2013, 10:56:48 PM |
|
Well crud - guess I have to set up somewhere for the nmc to go, too...
Edited my last post on the previous page. Might want to go back to it.
Holy crap that blue LED on the inside is bright. Did somebody forget a series resistor, or what?
|
|
|
|
firsttimeuser
|
|
October 07, 2013, 11:01:49 PM |
|
btc-e.com will give you NMC address
|
|
|
|
Tiennou74
|
|
October 07, 2013, 11:15:15 PM |
|
Eligius seems back up I've heard good things with https://deepbit.net/Let's try to avoid a pool with high fees and that gets DDos a lot.
|
|
|
|
thomas_s
|
|
October 07, 2013, 11:17:54 PM |
|
Eligius seems back up I've heard good things with https://deepbit.net/Let's try to avoid a pool with high fees and that gets DDos a lot. They get ddos'd because ppl get angry that they are so "lucky" i was making much more btc there than any other pool I had my miners on...now just waiting on bobsag3 to direct them to the btcguild servers.
|
|
|
|
-Redacted-
|
|
October 07, 2013, 11:20:43 PM |
|
BTCGuild has done one heck of a job bypassing all the DDOS stuff. It's where I go when everything else is screwed up. Here's the unboxing photos.... http://imgur.com/a/s44NM
|
|
|
|
Tiennou74
|
|
October 07, 2013, 11:22:50 PM |
|
EDIT: So cool! Thanks for the photos! Looks amazing! Crazy it arrived in this condition with the fans like that!! Did you have time to upgrade the firmware?
|
|
|
|
thomas_s
|
|
October 07, 2013, 11:23:18 PM |
|
BTCGuild has done one heck of a job bypassing all the DDOS stuff. It's where I go when everything else is screwed up. Here's the unboxing photos.... http://imgur.com/a/s44NMAhh theres your problem RAGILE <---Meaningless FRAGILE <-- they don't give a crap after it leaves the driver it goes on conveyer belts and has almost no human contact.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4298
Merit: 8828
'The right to privacy matters'
|
|
October 07, 2013, 11:26:28 PM |
|
You know how 4 pin fan connectors usually have a smaller polarizing plate that allows a three pin connector to fit on 4 pins properly? Well these connectors have a full 4 pin wide plate. Both of the three pin fan connectors were forced... One works, the other doesn't.. Can't send a picture without removing the fans - which I will do in a short while. Right now, it looks like Eligius is down - showing as dead in cgminer. The current pool hashrate is 300 Gh/s - down from 60+ Th/s Anyone have a preference for a backup pool? I can't connect to Eligius currently - it appears to be hosed. [2013-10-07 22:31:08] Accepted 171aa77d Diff 11/1 KnC 0 pool 0 [2013-10-07 22:31:09] Pool 0 stratum share submission failure [2013-10-07 22:32:09] Waiting for work to be available from pools. [2013-10-07 22:32:09] Work available from pools, resuming. [2013-10-07 22:32:34] Waiting for work to be available from pools. [2013-10-07 22:32:34] Work available from pools, resuming. [2013-10-07 22:32:38] Stratum connection to pool 0 interrupted [2013-10-07 22:32:41] Pool 0 difficulty changed to 1.999969 [2013-10-07 22:32:44] Pool 0 communication resumed, submitting work [2013-10-07 22:32:44] Waiting for work to be available from pools. [2013-10-07 22:32:44] Work available from pools, resuming. [2013-10-07 22:32:44] KnC running flushwork [2013-10-07 22:32:44] KnC: accepted by FPGA 21 works, but only 0 submitted [2013-10-07 22:32:45] Rejected 2a88f484 Diff 6/1 KnC 0 pool 0 (H-not-zero) [2013-10-07 22:32:46] Pool 0 stratum share submission failure [2013-10-07 22:33:46] Waiting for work to be available from pools. [2013-10-07 22:33:46] Work available from pools, resuming.
okay then you are describing what I thought you were doing wrong and in this case you are not doing anything wrong. my bad.
|
|
|
|
-Redacted-
|
|
October 07, 2013, 11:26:42 PM |
|
Did you have time to upgrade the firmware?
I've heard that you shouldn't, unless you have some particular issue.... There doesn't seem to be a way to tell what version is currently running via the web interface. Looks like we're hitting about the right hashrate - this is after about 10 minutes:
|
|
|
|
|
thomas_s
|
|
October 07, 2013, 11:42:07 PM |
|
The miners are being split between R5/R6 so its at 50% hashrate Miner 1 runs both R5/R6 Miner 2 runs both R5/R6 Miner 3 (not ours) Runs both R5/R6 to equal the missing hash rate for the other days. Then Miner 1 runs R5 Miner 2 runs R6
|
|
|
|
|
tripppn
|
|
October 07, 2013, 11:46:27 PM |
|
BTCGuild has done one heck of a job bypassing all the DDOS stuff. It's where I go when everything else is screwed up. Here's the unboxing photos.... http://imgur.com/a/s44NMMmmmm I can smell it from here. Smells like Christmas
|
“You can't be a real country unless you have a beer and an airline - it helps if you have some kind of football team, or some nuclear weapons, but in the very least you need a beer.” ― Frank Zappa
|
|
|
-Redacted-
|
|
October 07, 2013, 11:50:47 PM |
|
Actually it has more of that new electronics smell. Warm air, a touch of rosin, some volatiles from the solder mask and cleaning process, and just the slightest hint of ozone....
The heatsinks are warm to the touch. Overall it puts out less heat than my dual 7970 GPU miner (which I turned off some weeks ago.)
|
|
|
|
thomas_s
|
|
October 07, 2013, 11:52:18 PM |
|
Actually it has more of that new electronics smell. Warm air, a touch of rosin, some volatiles from the solder mask and cleaning process, and just the slightest hint of ozone....
I want to host it over the winter for warmth =) Also you can contact the admin of BTC guild if you have a high enough hashrate and get access to the private servers (which from what I know never got affected by the ddos)
|
|
|
|
-Redacted-
|
|
October 07, 2013, 11:58:04 PM Last edit: October 08, 2013, 12:08:18 AM by -Redacted- |
|
I already have private access at BTCGuild - I don't have any problems with DDOS. And I also mine at a couple of private pools, too, (one being GigaVPS) that don't end up getting DDOS'ed. I spread lots of hashrate around the various pools. I moved all my Bitfury stuff out of the way for the Jupiter - I'm going to have to re-organize things here and get those running again... And yes, I could heat my entire place for the winter with this - the place is triple insulated against the Minnesota winters. The dual GPU miner was too much - I had to leave windows open in the computer room even in the winter. I'm going to call it a night - I'll post some stuff in the morning like the hashrate chart and how much we made mining overnight, etc....
|
|
|
|
thomas_s
|
|
October 08, 2013, 12:10:01 AM |
|
I already have private access at BTCGuild - I don't have any problems with DDOS. And I also mine at a couple of private pools, too, (one being GigaVPS) that don't end up getting DDOS'ed. I spread lots of hashrate around the various pools. I moved all my Bitfury stuff out of the way for the Jupiter - I'm going to have to re-organize things here and get those running again... And yes, I could heat my entire place for the winter with this - the place is triple insulated against the Minnesota winters. The dual GPU miner was too much - I had to leave windows open in the computer room even in the winter. I'm going to call it a night - I'll post some stuff in the morning like the hashrate chart and how much we made mining overnight, etc.... Make a BTC Guild team for each of the units.
|
|
|
|
|
bbxx
|
|
October 08, 2013, 12:37:31 AM Last edit: October 08, 2013, 12:47:45 AM by bbxx |
|
Please consider www.polmine.pl as pool It has merged mining nmc Low fee 1% smPPS High luck Instant hashing instant payout Nice charts and signatures Precise stats, every share is listed Full group buy support, you can split income into separate accounts Great hall of fame No downtimes Separate port for choosen diffilcuty Thanks Some features are not translated so you can switch to polish flag to try them (detailed worker charts, income split)
|
|
|
|
|