Cookie.Monsters
Jr. Member
 Offline
Activity: 440
Merit: 1
|
 |
November 07, 2018, 12:48:24 PM |
|
hi
im send paccoin my wallet to another wallet.yesterday send but Until today Transaction Status: 0/unconfirmed, in memory pool.check explorer.paccoin.net no found record.whats problem?
do recover Transaction ?
please help me.
thanks.
Which wallet are you having issues with - mobile or desktop? If desktop, are you using the newest version of the desktop wallet (0.12.5.1)? The issue can be solved quicker if you visit the $PAC discord server (invite: https://discord.gg/Bx2HKfy) and ask for help in the #paccore-wallet-support or #mobile-wallet-support channels. im use desktop version.use last version. Then please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and check the block number against the block number in your wallet under "Tools > Information". If the block number matches then your wallet is working correctly. If it doesn’t match please go to "Tools > Wallet Repair > Reindex". Is the transaction status "in memory pool" or "not in memory pool"? im use reindex but not confirmed.transaction Status: 0/unconfirmed, in memory pool. check transaction http://explorer.foxrtb.com No matching records found!. Please try closing your wallet and then opening it again. Do wait at least for 30 minutes to see if the transaction starts confirming. Are you sure that your wallet(s) are on the correct block (see the message above)? Is the target wallet also synced and on the correct block? |
|
|
|
|
|
|
|
|
|
|
|
There are several different types of Bitcoin clients. The most secure are full nodes like Bitcoin Core, which will follow the rules of the network no matter what miners do. Even if every miner decided to create 1000 bitcoins per block, full nodes would stick to the rules and reject those blocks.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
Cookie.Monsters
Jr. Member
Offline
Activity: 440
Merit: 1
|
|
November 07, 2018, 01:26:57 PM |
|
$PAC has been invited to speak at this years Washington Elite Blockchain Summit!Robin Matthes, Director of Charity for $PAC has been invited to speak at this years Washington Elite Blockchain Summit. The Washington Elite Blockchain Summit is an upcoming crypto convention that focuses on charity, hosted by Bruce Porter Jr, CEO at GlobalBoost. The event will be held the 30th of November to the 1st of December and includes talks from industry leaders including: John McAfee, President Vit Jedlicka, Kent Kristensen, Jared Tate, Jorg Molt and many more. The event is hosted with the intention to provide a world class blockchain conference whilst encouraging charitable support for numerous non-profits, such as The Blinded Veterans Association, Tour De Crypto and more. More information on the subject can be found here: https://blog.paccoin.net/pac-invited-speak-washington-elite-blockchain-summit/
|
|
|
|
|
cloner
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 07, 2018, 02:54:11 PM |
|
hi
im send paccoin my wallet to another wallet.yesterday send but Until today Transaction Status: 0/unconfirmed, in memory pool.check explorer.paccoin.net no found record.whats problem?
do recover Transaction ?
please help me.
thanks.
Which wallet are you having issues with - mobile or desktop? If desktop, are you using the newest version of the desktop wallet (0.12.5.1)? The issue can be solved quicker if you visit the $PAC discord server (invite: https://discord.gg/Bx2HKfy) and ask for help in the #paccore-wallet-support or #mobile-wallet-support channels. im use desktop version.use last version. Then please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and check the block number against the block number in your wallet under "Tools > Information". If the block number matches then your wallet is working correctly. If it doesn’t match please go to "Tools > Wallet Repair > Reindex". Is the transaction status "in memory pool" or "not in memory pool"? im use reindex but not confirmed.transaction Status: 0/unconfirmed, in memory pool. check transaction http://explorer.foxrtb.com No matching records found!. Please try closing your wallet and then opening it again. Do wait at least for 30 minutes to see if the transaction starts confirming. Are you sure that your wallet(s) are on the correct block (see the message above)? Is the target wallet also synced and on the correct block? im send yesteday.Very much open desktop wallet and exit.no start confrim.im wallet and target wallet , both wallet has a synced. Purpose correct block for wallet?please Explanation for me. |
|
|
|
|
Margary
Sr. Member
Offline
Activity: 854
Merit: 252
★Bitvest.io★ Play Plinko or Invest!
|
|
November 07, 2018, 03:12:04 PM |
|
I have faith in Paccoin , still a firm believer after loosing 38 btc during the pump. Can’t cry over spilled milk. I’ll be happy to see it go $0.10 in 2019.
Hodl hodl and hodl.
do not be upset by these losses. Of course, this is not nice, because it's in vain for anyone to lose money. however, I believe that the situation will soon be normalized and we will see a successful and high level of coin price. |
|
|
|
Cookie.Monsters
Jr. Member
Offline
Activity: 440
Merit: 1
|
|
November 07, 2018, 04:12:45 PM |
|
hi
im send paccoin my wallet to another wallet.yesterday send but Until today Transaction Status: 0/unconfirmed, in memory pool.check explorer.paccoin.net no found record.whats problem?
do recover Transaction ?
please help me.
thanks.
Which wallet are you having issues with - mobile or desktop? If desktop, are you using the newest version of the desktop wallet (0.12.5.1)? The issue can be solved quicker if you visit the $PAC discord server (invite: https://discord.gg/Bx2HKfy) and ask for help in the #paccore-wallet-support or #mobile-wallet-support channels. im use desktop version.use last version. Then please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and check the block number against the block number in your wallet under "Tools > Information". If the block number matches then your wallet is working correctly. If it doesn’t match please go to "Tools > Wallet Repair > Reindex". Is the transaction status "in memory pool" or "not in memory pool"? im use reindex but not confirmed.transaction Status: 0/unconfirmed, in memory pool. check transaction http://explorer.foxrtb.com No matching records found!. Please try closing your wallet and then opening it again. Do wait at least for 30 minutes to see if the transaction starts confirming. Are you sure that your wallet(s) are on the correct block (see the message above)? Is the target wallet also synced and on the correct block? im send yesteday.Very much open desktop wallet and exit.no start confrim.im wallet and target wallet , both wallet has a synced. Purpose correct block for wallet?please Explanation for me. Your wallet has to be on the same block as the explorer mentioned above. If they are not on the same block, your wallet is on the wrong chain and, therefore, cannot send $PAC to anyone. Please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and compare the latest block number (in the "Height" column) to the block number in your wallet under "Tools > Information". |
|
|
|
|
cloner
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 07, 2018, 04:46:48 PM |
|
hi
im send paccoin my wallet to another wallet.yesterday send but Until today Transaction Status: 0/unconfirmed, in memory pool.check explorer.paccoin.net no found record.whats problem?
do recover Transaction ?
please help me.
thanks.
Which wallet are you having issues with - mobile or desktop? If desktop, are you using the newest version of the desktop wallet (0.12.5.1)? The issue can be solved quicker if you visit the $PAC discord server (invite: https://discord.gg/Bx2HKfy) and ask for help in the #paccore-wallet-support or #mobile-wallet-support channels. im use desktop version.use last version. Then please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and check the block number against the block number in your wallet under "Tools > Information". If the block number matches then your wallet is working correctly. If it doesn’t match please go to "Tools > Wallet Repair > Reindex". Is the transaction status "in memory pool" or "not in memory pool"? im use reindex but not confirmed.transaction Status: 0/unconfirmed, in memory pool. check transaction http://explorer.foxrtb.com No matching records found!. Please try closing your wallet and then opening it again. Do wait at least for 30 minutes to see if the transaction starts confirming. Are you sure that your wallet(s) are on the correct block (see the message above)? Is the target wallet also synced and on the correct block? im send yesteday.Very much open desktop wallet and exit.no start confrim.im wallet and target wallet , both wallet has a synced. Purpose correct block for wallet?please Explanation for me. Your wallet has to be on the same block as the explorer mentioned above. If they are not on the same block, your wallet is on the wrong chain and, therefore, cannot send $PAC to anyone. Please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and compare the latest block number (in the "Height" column) to the block number in your wallet under "Tools > Information". check tools> information cuurent number of block to range is latest block number.block for wallet smaller than latest block. |
|
|
|
|
Cookie.Monsters
Jr. Member
Offline
Activity: 440
Merit: 1
|
|
November 07, 2018, 05:04:14 PM |
|
hi
im send paccoin my wallet to another wallet.yesterday send but Until today Transaction Status: 0/unconfirmed, in memory pool.check explorer.paccoin.net no found record.whats problem?
do recover Transaction ?
please help me.
thanks.
Which wallet are you having issues with - mobile or desktop? If desktop, are you using the newest version of the desktop wallet (0.12.5.1)? The issue can be solved quicker if you visit the $PAC discord server (invite: https://discord.gg/Bx2HKfy) and ask for help in the #paccore-wallet-support or #mobile-wallet-support channels. im use desktop version.use last version. Then please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and check the block number against the block number in your wallet under "Tools > Information". If the block number matches then your wallet is working correctly. If it doesn’t match please go to "Tools > Wallet Repair > Reindex". Is the transaction status "in memory pool" or "not in memory pool"? im use reindex but not confirmed.transaction Status: 0/unconfirmed, in memory pool. check transaction http://explorer.foxrtb.com No matching records found!. Please try closing your wallet and then opening it again. Do wait at least for 30 minutes to see if the transaction starts confirming. Are you sure that your wallet(s) are on the correct block (see the message above)? Is the target wallet also synced and on the correct block? im send yesteday.Very much open desktop wallet and exit.no start confrim.im wallet and target wallet , both wallet has a synced. Purpose correct block for wallet?please Explanation for me. Your wallet has to be on the same block as the explorer mentioned above. If they are not on the same block, your wallet is on the wrong chain and, therefore, cannot send $PAC to anyone. Please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and compare the latest block number (in the "Height" column) to the block number in your wallet under "Tools > Information". check tools> information cuurent number of block to range is latest block number.block for wallet smaller than latest block. Before you proceed, please create a backup copy of your wallet.dat (and masternode.conf if you have masternodes) just in case anything should go wrong. In case the block numbers are not the same, in your wallet please go to "Tools > Wallet Repair" and choose "Rebuild index". |
|
|
|
|
cloner
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 07, 2018, 05:29:24 PM |
|
hi
im send paccoin my wallet to another wallet.yesterday send but Until today Transaction Status: 0/unconfirmed, in memory pool.check explorer.paccoin.net no found record.whats problem?
do recover Transaction ?
please help me.
thanks.
Which wallet are you having issues with - mobile or desktop? If desktop, are you using the newest version of the desktop wallet (0.12.5.1)? The issue can be solved quicker if you visit the $PAC discord server (invite: https://discord.gg/Bx2HKfy) and ask for help in the #paccore-wallet-support or #mobile-wallet-support channels. im use desktop version.use last version. Then please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and check the block number against the block number in your wallet under "Tools > Information". If the block number matches then your wallet is working correctly. If it doesn’t match please go to "Tools > Wallet Repair > Reindex". Is the transaction status "in memory pool" or "not in memory pool"? im use reindex but not confirmed.transaction Status: 0/unconfirmed, in memory pool. check transaction http://explorer.foxrtb.com No matching records found!. Please try closing your wallet and then opening it again. Do wait at least for 30 minutes to see if the transaction starts confirming. Are you sure that your wallet(s) are on the correct block (see the message above)? Is the target wallet also synced and on the correct block? im send yesteday.Very much open desktop wallet and exit.no start confrim.im wallet and target wallet , both wallet has a synced. Purpose correct block for wallet?please Explanation for me. Your wallet has to be on the same block as the explorer mentioned above. If they are not on the same block, your wallet is on the wrong chain and, therefore, cannot send $PAC to anyone. Please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and compare the latest block number (in the "Height" column) to the block number in your wallet under "Tools > Information". check tools> information cuurent number of block to range is latest block number.block for wallet smaller than latest block. Before you proceed, please create a backup copy of your wallet.dat (and masternode.conf if you have masternodes) just in case anything should go wrong. In case the block numbers are not the same, in your wallet please go to "Tools > Wallet Repair" and choose "Rebuild index". before im wallet repair and rebuild index.not fix problem. |
|
|
|
|
Cookie.Monsters
Jr. Member
Offline
Activity: 440
Merit: 1
|
|
November 07, 2018, 05:35:45 PM |
|
hi
im send paccoin my wallet to another wallet.yesterday send but Until today Transaction Status: 0/unconfirmed, in memory pool.check explorer.paccoin.net no found record.whats problem?
do recover Transaction ?
please help me.
thanks.
Which wallet are you having issues with - mobile or desktop? If desktop, are you using the newest version of the desktop wallet (0.12.5.1)? The issue can be solved quicker if you visit the $PAC discord server (invite: https://discord.gg/Bx2HKfy) and ask for help in the #paccore-wallet-support or #mobile-wallet-support channels. im use desktop version.use last version. Then please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and check the block number against the block number in your wallet under "Tools > Information". If the block number matches then your wallet is working correctly. If it doesn’t match please go to "Tools > Wallet Repair > Reindex". Is the transaction status "in memory pool" or "not in memory pool"? im use reindex but not confirmed.transaction Status: 0/unconfirmed, in memory pool. check transaction http://explorer.foxrtb.com No matching records found!. Please try closing your wallet and then opening it again. Do wait at least for 30 minutes to see if the transaction starts confirming. Are you sure that your wallet(s) are on the correct block (see the message above)? Is the target wallet also synced and on the correct block? im send yesteday.Very much open desktop wallet and exit.no start confrim.im wallet and target wallet , both wallet has a synced. Purpose correct block for wallet?please Explanation for me. Your wallet has to be on the same block as the explorer mentioned above. If they are not on the same block, your wallet is on the wrong chain and, therefore, cannot send $PAC to anyone. Please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and compare the latest block number (in the "Height" column) to the block number in your wallet under "Tools > Information". check tools> information cuurent number of block to range is latest block number.block for wallet smaller than latest block. Before you proceed, please create a backup copy of your wallet.dat (and masternode.conf if you have masternodes) just in case anything should go wrong. In case the block numbers are not the same, in your wallet please go to "Tools > Wallet Repair" and choose "Rebuild index". before im wallet repair and rebuild index.not fix problem. If not already done, before you proceed, please create a backup copy of your wallet.dat (and masternode.conf if you have masternodes) just in case anything should go wrong. If you are using the Windows OS, in the PaccoinCore folder delete everything but the wallet.dat, masternode.conf and paccoin-qt.exe and start the wallet again paccoin-qt.exe. This will force the wallet to download a fresh copy of the blockchain data. |
|
|
|
|
cloner
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 07, 2018, 06:01:23 PM
Last edit: November 07, 2018, 06:16:58 PM by cloner |
|
hi
im send paccoin my wallet to another wallet.yesterday send but Until today Transaction Status: 0/unconfirmed, in memory pool.check explorer.paccoin.net no found record.whats problem?
do recover Transaction ?
please help me.
thanks.
Which wallet are you having issues with - mobile or desktop? If desktop, are you using the newest version of the desktop wallet (0.12.5.1)? The issue can be solved quicker if you visit the $PAC discord server (invite: https://discord.gg/Bx2HKfy) and ask for help in the #paccore-wallet-support or #mobile-wallet-support channels. im use desktop version.use last version. Then please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and check the block number against the block number in your wallet under "Tools > Information". If the block number matches then your wallet is working correctly. If it doesn’t match please go to "Tools > Wallet Repair > Reindex". Is the transaction status "in memory pool" or "not in memory pool"? im use reindex but not confirmed.transaction Status: 0/unconfirmed, in memory pool. check transaction http://explorer.foxrtb.com No matching records found!. Please try closing your wallet and then opening it again. Do wait at least for 30 minutes to see if the transaction starts confirming. Are you sure that your wallet(s) are on the correct block (see the message above)? Is the target wallet also synced and on the correct block? im send yesteday.Very much open desktop wallet and exit.no start confrim.im wallet and target wallet , both wallet has a synced. Purpose correct block for wallet?please Explanation for me. Your wallet has to be on the same block as the explorer mentioned above. If they are not on the same block, your wallet is on the wrong chain and, therefore, cannot send $PAC to anyone. Please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and compare the latest block number (in the "Height" column) to the block number in your wallet under "Tools > Information". check tools> information cuurent number of block to range is latest block number.block for wallet smaller than latest block. Before you proceed, please create a backup copy of your wallet.dat (and masternode.conf if you have masternodes) just in case anything should go wrong. In case the block numbers are not the same, in your wallet please go to "Tools > Wallet Repair" and choose "Rebuild index". before im wallet repair and rebuild index.not fix problem. If not already done, before you proceed, please create a backup copy of your wallet.dat (and masternode.conf if you have masternodes) just in case anything should go wrong. If you are using the Windows OS, in the PaccoinCore folder delete everything but the wallet.dat, masternode.conf and paccoin-qt.exe and start the wallet again paccoin-qt.exe. This will force the wallet to download a fresh copy of the blockchain data. backup wallet.dat and backup masternode.conf , delete other file and synced again? now problem , im update paccoin to new version , vesion v0.12.04 to v0.12.5.1 , im wallet balance 9351 , but after update new version balanc 3279 . rounds walet 9351 /rounds 2 , whtas problem? |
|
|
|
|
Cookie.Monsters
Jr. Member
Offline
Activity: 440
Merit: 1
|
|
November 07, 2018, 06:42:13 PM |
|
hi
im send paccoin my wallet to another wallet.yesterday send but Until today Transaction Status: 0/unconfirmed, in memory pool.check explorer.paccoin.net no found record.whats problem?
do recover Transaction ?
please help me.
thanks.
Which wallet are you having issues with - mobile or desktop? If desktop, are you using the newest version of the desktop wallet (0.12.5.1)? The issue can be solved quicker if you visit the $PAC discord server (invite: https://discord.gg/Bx2HKfy) and ask for help in the #paccore-wallet-support or #mobile-wallet-support channels. im use desktop version.use last version. Then please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and check the block number against the block number in your wallet under "Tools > Information". If the block number matches then your wallet is working correctly. If it doesn’t match please go to "Tools > Wallet Repair > Reindex". Is the transaction status "in memory pool" or "not in memory pool"? im use reindex but not confirmed.transaction Status: 0/unconfirmed, in memory pool. check transaction http://explorer.foxrtb.com No matching records found!. Please try closing your wallet and then opening it again. Do wait at least for 30 minutes to see if the transaction starts confirming. Are you sure that your wallet(s) are on the correct block (see the message above)? Is the target wallet also synced and on the correct block? im send yesteday.Very much open desktop wallet and exit.no start confrim.im wallet and target wallet , both wallet has a synced. Purpose correct block for wallet?please Explanation for me. Your wallet has to be on the same block as the explorer mentioned above. If they are not on the same block, your wallet is on the wrong chain and, therefore, cannot send $PAC to anyone. Please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and compare the latest block number (in the "Height" column) to the block number in your wallet under "Tools > Information". check tools> information cuurent number of block to range is latest block number.block for wallet smaller than latest block. Before you proceed, please create a backup copy of your wallet.dat (and masternode.conf if you have masternodes) just in case anything should go wrong. In case the block numbers are not the same, in your wallet please go to "Tools > Wallet Repair" and choose "Rebuild index". before im wallet repair and rebuild index.not fix problem. If not already done, before you proceed, please create a backup copy of your wallet.dat (and masternode.conf if you have masternodes) just in case anything should go wrong. If you are using the Windows OS, in the PaccoinCore folder delete everything but the wallet.dat, masternode.conf and paccoin-qt.exe and start the wallet again paccoin-qt.exe. This will force the wallet to download a fresh copy of the blockchain data. backup wallet.dat and backup masternode.conf , delete other file and synced again? now problem , im update paccoin to new version , vesion v0.12.04 to v0.12.5.1 , im wallet balance 9351 , but after update new version balanc 3279 . rounds walet 9351 /rounds 2 , whtas problem? Only now you updated your wallet to the new version? A few posts back you claimed you are already using the newest version "im use desktop version.use last version."? In any case, is the wallet fully synced? If yes, can you now check the Transaction section of the wallet and see which transactions are unconfirmed and whether they are in the memory pool or not? As stated previously, this would be much easier if you could join the $PAC discord server and one could do a live chat instead of posting. |
|
|
|
|
cloner
Newbie
Offline
Activity: 11
Merit: 0
|
|
November 07, 2018, 07:09:32 PM |
|
hi
im send paccoin my wallet to another wallet.yesterday send but Until today Transaction Status: 0/unconfirmed, in memory pool.check explorer.paccoin.net no found record.whats problem?
do recover Transaction ?
please help me.
thanks.
Which wallet are you having issues with - mobile or desktop? If desktop, are you using the newest version of the desktop wallet (0.12.5.1)? The issue can be solved quicker if you visit the $PAC discord server (invite: https://discord.gg/Bx2HKfy) and ask for help in the #paccore-wallet-support or #mobile-wallet-support channels. im use desktop version.use last version. Then please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and check the block number against the block number in your wallet under "Tools > Information". If the block number matches then your wallet is working correctly. If it doesn’t match please go to "Tools > Wallet Repair > Reindex". Is the transaction status "in memory pool" or "not in memory pool"? im use reindex but not confirmed.transaction Status: 0/unconfirmed, in memory pool. check transaction http://explorer.foxrtb.com No matching records found!. Please try closing your wallet and then opening it again. Do wait at least for 30 minutes to see if the transaction starts confirming. Are you sure that your wallet(s) are on the correct block (see the message above)? Is the target wallet also synced and on the correct block? im send yesteday.Very much open desktop wallet and exit.no start confrim.im wallet and target wallet , both wallet has a synced. Purpose correct block for wallet?please Explanation for me. Your wallet has to be on the same block as the explorer mentioned above. If they are not on the same block, your wallet is on the wrong chain and, therefore, cannot send $PAC to anyone. Please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and compare the latest block number (in the "Height" column) to the block number in your wallet under "Tools > Information". check tools> information cuurent number of block to range is latest block number.block for wallet smaller than latest block. Before you proceed, please create a backup copy of your wallet.dat (and masternode.conf if you have masternodes) just in case anything should go wrong. In case the block numbers are not the same, in your wallet please go to "Tools > Wallet Repair" and choose "Rebuild index". before im wallet repair and rebuild index.not fix problem. If not already done, before you proceed, please create a backup copy of your wallet.dat (and masternode.conf if you have masternodes) just in case anything should go wrong. If you are using the Windows OS, in the PaccoinCore folder delete everything but the wallet.dat, masternode.conf and paccoin-qt.exe and start the wallet again paccoin-qt.exe. This will force the wallet to download a fresh copy of the blockchain data. backup wallet.dat and backup masternode.conf , delete other file and synced again? now problem , im update paccoin to new version , vesion v0.12.04 to v0.12.5.1 , im wallet balance 9351 , but after update new version balanc 3279 . rounds walet 9351 /rounds 2 , whtas problem? Only now you updated your wallet to the new version? A few posts back you claimed you are already using the newest version "im use desktop version.use last version."? In any case, is the wallet fully synced? If yes, can you now check the Transaction section of the wallet and see which transactions are unconfirmed and whether they are in the memory pool or not? As stated previously, this would be much easier if you could join the $PAC discord server and one could do a live chat instead of posting. im joined but message ou do not have permission to send messages in this chat. |
|
|
|
|
Cookie.Monsters
Jr. Member
Offline
Activity: 440
Merit: 1
|
|
November 07, 2018, 07:14:49 PM |
|
hi
im send paccoin my wallet to another wallet.yesterday send but Until today Transaction Status: 0/unconfirmed, in memory pool.check explorer.paccoin.net no found record.whats problem?
do recover Transaction ?
please help me.
thanks.
Which wallet are you having issues with - mobile or desktop? If desktop, are you using the newest version of the desktop wallet (0.12.5.1)? The issue can be solved quicker if you visit the $PAC discord server (invite: https://discord.gg/Bx2HKfy) and ask for help in the #paccore-wallet-support or #mobile-wallet-support channels. im use desktop version.use last version. Then please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and check the block number against the block number in your wallet under "Tools > Information". If the block number matches then your wallet is working correctly. If it doesn’t match please go to "Tools > Wallet Repair > Reindex". Is the transaction status "in memory pool" or "not in memory pool"? im use reindex but not confirmed.transaction Status: 0/unconfirmed, in memory pool. check transaction http://explorer.foxrtb.com No matching records found!. Please try closing your wallet and then opening it again. Do wait at least for 30 minutes to see if the transaction starts confirming. Are you sure that your wallet(s) are on the correct block (see the message above)? Is the target wallet also synced and on the correct block? im send yesteday.Very much open desktop wallet and exit.no start confrim.im wallet and target wallet , both wallet has a synced. Purpose correct block for wallet?please Explanation for me. Your wallet has to be on the same block as the explorer mentioned above. If they are not on the same block, your wallet is on the wrong chain and, therefore, cannot send $PAC to anyone. Please check if your wallet(s) is/are on the right chain: visit http://explorer.foxrtb.com/ and compare the latest block number (in the "Height" column) to the block number in your wallet under "Tools > Information". check tools> information cuurent number of block to range is latest block number.block for wallet smaller than latest block. Before you proceed, please create a backup copy of your wallet.dat (and masternode.conf if you have masternodes) just in case anything should go wrong. In case the block numbers are not the same, in your wallet please go to "Tools > Wallet Repair" and choose "Rebuild index". before im wallet repair and rebuild index.not fix problem. If not already done, before you proceed, please create a backup copy of your wallet.dat (and masternode.conf if you have masternodes) just in case anything should go wrong. If you are using the Windows OS, in the PaccoinCore folder delete everything but the wallet.dat, masternode.conf and paccoin-qt.exe and start the wallet again paccoin-qt.exe. This will force the wallet to download a fresh copy of the blockchain data. backup wallet.dat and backup masternode.conf , delete other file and synced again? now problem , im update paccoin to new version , vesion v0.12.04 to v0.12.5.1 , im wallet balance 9351 , but after update new version balanc 3279 . rounds walet 9351 /rounds 2 , whtas problem? Only now you updated your wallet to the new version? A few posts back you claimed you are already using the newest version "im use desktop version.use last version."? In any case, is the wallet fully synced? If yes, can you now check the Transaction section of the wallet and see which transactions are unconfirmed and whether they are in the memory pool or not? As stated previously, this would be much easier if you could join the $PAC discord server and one could do a live chat instead of posting. im joined but message ou do not have permission to send messages in this chat. Ok, you are probably in the welcome channel where you do not have permissions to write. Please have a look at the #paccore-wallet-support channel (in the channel group named "Support") and describe the problem and what was tried already there. |
|
|
|
|
Cookie.Monsters
Jr. Member
Offline
Activity: 440
Merit: 1
|
|
November 07, 2018, 08:01:19 PM |
|
A summary of the recent changes and the state of the $PAC network including information on exchanges can be found in the following blog entry: $PAC – Overcoming Adversity: https://blog.paccoin.net/pac-overcoming-adversity/Important reminder: If you haven’t already, please ensure you have updated your wallets and masternodes to version 12.5.1 - this update is mandatory. To update your wallet visit: http://wallets.paccoin.net/ and download the latest version (12.5.1) for your OS, before installing make sure you backup your current wallet (make copies of wallet.dat and masternode.conf). Once the wallet has synced, check if you’re on the correct chain: please visit http://explorer.foxrtb.com/ and check the block number against the block number in your wallet under ‘Tools > Information’. If the block number matches then your wallet is working correctly. If it doesn’t match, please go to ‘Tools > Wallet Repair > Reindex’. For any other questions including instructions on updating your masternode, please check the #important-news and support channels in the $PAC discord server: https://discord.gg/Bx2HKfy |
|
|
|
|
Stabycroc
Member
Offline
Activity: 497
Merit: 24
|
|
November 09, 2018, 05:26:54 AM |
|
And dont say Staby didnt warn Pac$ investors ;_)>>  Amateur hour dev's they are. Basically u dont do coin swap stealing from old investors some of which paid 1k per old paccoin to lower vol to then making it minable to make more coins... Pro devs would of done full clean swap like HUZU swap..  I think nubcakes to crypto will learn in time and old guards try to teach to avoid but some people have to learn the hard way to really learn. Da ja Stabycroc ;_)> |
|
|
|
|
Cookie.Monsters
Jr. Member
Offline
Activity: 440
Merit: 1
|
|
November 09, 2018, 10:27:47 AM |
|
To my knowledge, all exchanges which are still using the old wallet have finally responded to $PAC team support requests and have put their $PAC wallets in the maintenance mode. Since none of the exchanges provided a date / time when their $PAC wallet is going to be online again, before sending $PAC to your favorite exchange, at least check if the $PAC wallet of the exchange is online (one should do that for every coin every time). Ideally and for the most up-to-date information on available exchanges, please join the $PAC discord server: https://discord.gg/Bx2HKfy |
|
|
|
|
Cookie.Monsters
Jr. Member
Offline
Activity: 440
Merit: 1
|
|
November 09, 2018, 02:51:16 PM |
|
Brief update: $PAC is now listed on the Graviex exchange across the BTC & GIO pairings.
Their mobile trading app can be used for trading $PAC on the go.
|
|
|
|
|
|
rowenta01
|
|
November 09, 2018, 07:32:37 PM |
|
I do not have the right balance on my wallet. A transaction did not work and it does not show the balance of my failed transaction.
How can I get my wallet repaired? The "repairwallet" command does not work.
Thanks for your help
|
Report to moderator __◣ Stake.com ◥ Stake v2 Now live! 12+ Gamemodes | Provably Fair | Daily Giveaways |
|
|
Cookie.Monsters
Jr. Member
Offline
Activity: 440
Merit: 1
|
|
November 09, 2018, 07:36:34 PM |
|
I do not have the right balance on my wallet. A transaction did not work and it does not show the balance of my failed transaction.
How can I get my wallet repaired? The "repairwallet" command does not work.
Thanks for your help
As mentioned a few posts above, please ensure you have updated your wallets and masternodes to version 12.5.1 - this update is mandatory. To update your wallet visit: http://wallets.paccoin.net/ and download the latest version (12.5.1) for your OS, before installing make sure you backup your current wallet (i.e., make copies of wallet.dat and masternode.conf). Once the wallet has synced, check if you’re on the correct chain: please visit http://explorer.foxrtb.com/ and check the block number against the block number in your wallet under ‘Tools > Information’. If the block number matches then your wallet is working correctly. If it doesn’t match, please go to ‘Tools > Wallet Repair > Reindex’. If you need further help, please check the #important-news and support channels in the $PAC discord server: https://discord.gg/Bx2HKfy |
|
|
|
|
carabas8
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 10, 2018, 10:41:19 PM |
|
This is a complete scam! Money is withdrawn from wallets! This is not a serious team! Withdraw money is not possible!  |
|
|
|
|
|
