form (OP)
Newbie
Offline
Activity: 41
Merit: 0
|
|
November 28, 2013, 07:04:49 PM |
|
Hey guys... I finished a 16-chip board design. Size: 145 mm x 70 mm (5.70866 inch x 2.75591 inch) Board features:- Very efficient (~90%) DC/DC converter to power the ASICs
- Adjustable voltage (0.85 - 1.25 V) to choose between efficiency and overclocking
- USB-Interface to connect to a host running cgminer or bfgminer
- I²C interface to chain multiple boards together
- 100% flat surface on the bottom side to mount a usual heatsink
- On-board temperature management
- Fan connector with rotation speed measurement and PWM-control
- Indicator LED to report USB-activity
- 4-layer PCB for optimal heat/current transportation
- Two board designs available: one for 10 and another for 16 ASICs
cgminer/bfgminer patch features:- Reporting temperature, real ASIC frequency and fan-speed back to the host
- Control of ASIC frequency in a big range from 62.5 to 5000 MHz in smallest possible steps
- Control of a desired temperature
Support:The best way to get support at the moment is joining #avalon2 on freenode IRCGet a board:I can offer bare pcb's and ready-to-mine units. But first i have to see how much demand here is, to get an idea of how many boards i should order - which is turning the screw of pricing. If you want to order a board, send me a message with the following information: - ammount of bare PCBs you want
- ammount of ready-to-mine boards you want
- destination country
At december 8th i will make a summary, get prices at the distributors, pcb-fab and assy and will reply to your mails with an offer you can't refuse Be aware that i don't sell Avalon chips. If you want an assembled board, you have to supply the chips on tape or reel to me in germany. . . . https://raw.github.com/formtapez/avalon/master/Layout/16-chip-board/board-layer01-top-name.png
|
|
|
|
|
allinvain
Legendary
Offline
Activity: 3080
Merit: 1080
|
|
November 29, 2013, 05:47:36 AM |
|
Shame nobody plans to build Avalon batc 1,2,and 3 compatible board but with 55nm chips.
|
|
|
|
fasmax
|
|
November 29, 2013, 07:40:37 AM |
|
Shame nobody plans to build Avalon batc 1,2,and 3 compatible board but with 55nm chips.
I agree. I have a working mini backplane that turns 2 Avalon hash units into a 20 chip Klondike.
|
|
|
|
bitterdog
|
|
November 29, 2013, 05:21:56 PM |
|
Please Please PLEASE make a single or double chip USB miner
|
|
|
|
marto74
|
|
November 30, 2013, 08:02:56 AM |
|
Please Please PLEASE make a single or double chip USB miner
It'll be way too HOT
|
|
|
|
Bicknellski
|
|
November 30, 2013, 08:13:02 AM |
|
Please Please PLEASE make a single or double chip USB miner
It'll be way too HOT Make a single or double chip USB coffee warmer.
|
|
|
|
form (OP)
Newbie
Offline
Activity: 41
Merit: 0
|
|
December 10, 2013, 09:01:47 PM |
|
At december 8th i will make a summary, get prices at the distributors, pcb-fab and assy and will reply to your mails with an offer you can't refuse Hey, sorry for being a bit late with my answer. Many people were asking me how much these boards will cost, and how long it takes, etc. I was collecting the ammount of boards to get specific prices for boards and assembly - But here in germany the prices are way too high. Meanwhile the user "bit-tech" flew to Shenzen in china to check the prices there and he got it managed to get really good quotes there. And this is where i'm out of the game now: bit-tech is now ordering a big amount of boards & chips and getting them assembled there. He will post here in the next days with more details.
|
|
|
|
Bit-Tech
Member
Offline
Activity: 226
Merit: 10
|
|
December 13, 2013, 07:43:11 AM |
|
Hi Guys
We will have a couple of working prototypes by this Wednesday , if everything goes as planned we will put it into mass production , il keep you guys updated on this thread. We will be offering completed boards and DYI kit's based upon form's design. We'r launching our website soon.
Regards Bit-Tech
|
|
|
|
fractal02
|
|
December 13, 2013, 06:39:12 PM |
|
Hi Guys
We will have a couple of working prototypes by this Wednesday , if everything goes as planned we will put it into mass production , il keep you guys updated on this thread. We will be offering completed boards and DYI kit's based upon form's design. We'r launching our website soon.
Regards Bit-Tech
Great ! Watching
|
|
|
|
testerx
|
|
December 14, 2013, 09:13:45 AM |
|
Hi Guys
We will have a couple of working prototypes by this Wednesday , if everything goes as planned we will put it into mass production , il keep you guys updated on this thread. We will be offering completed boards and DYI kit's based upon form's design. We'r launching our website soon.
Regards Bit-Tech
Bit-Tech, were you able to source chips as well or are these going to be blank boards?
|
|
|
|
form (OP)
Newbie
Offline
Activity: 41
Merit: 0
|
|
December 20, 2013, 10:12:04 AM |
|
If someone needs cheap power-modules (PTH12040WAH) send a message to Lucko.
|
|
|
|
Bit-Tech
Member
Offline
Activity: 226
Merit: 10
|
|
December 20, 2013, 10:36:37 AM |
|
Hi Guys
We will have a couple of working prototypes by this Wednesday , if everything goes as planned we will put it into mass production , il keep you guys updated on this thread. We will be offering completed boards and DYI kit's based upon form's design. We'r launching our website soon.
Regards Bit-Tech
Bit-Tech, were you able to source chips as well or are these going to be blank boards? source chips aswell . Factory is missing one component they had to order it from digikey cause its not avaible here in Shenzhen , so there is another week of waiting again.
|
|
|
|
Lucko
|
|
December 21, 2013, 07:49:28 AM |
|
If someone needs cheap power-modules (PTH12040WAH) send a message to Lucko. Yes I have 150 of them. So price will change a bit on numbers you would like to get but generally it will cost less then I pay for them. I made a mistake of buying too many... I'm in EU...
|
|
|
|
|
fasmax
|
|
December 23, 2013, 03:39:24 AM |
|
It almost looks like a firmware problem. What firmware did you load into the PIC chip?
|
|
|
|
hongkongapple1
Newbie
Offline
Activity: 49
Merit: 0
|
|
December 23, 2013, 09:49:09 AM |
|
I have try both ~
Loading " Klondike.X.production.hex "
under -> by Formtapez_ avalon-master\firmware\Klondike.X\dist\K16\production
Also, try open the project there named "Klondike" in MPLAB X IDE, and load from there
|
|
|
|
form (OP)
Newbie
Offline
Activity: 41
Merit: 0
|
|
December 23, 2013, 11:24:17 AM |
|
Looks like you dont used the patched cgminer version. You can also use BFGminer, which includes automatic detection of this boards.
Btw (not the problem here): Did you changed the chipcount to 16 in the code? The precompiled one is for the 10 chips board.
|
|
|
|
turtle83
|
|
December 23, 2013, 02:08:02 PM |
|
I have make 2 ~ round about $250/board, if anyone interested ~ All hardware have been assembled, including a Big Heatsink ~ ~~~ I can't really test it , Need to be setup properly for testing ...
Compiling a proper Cgminer ~ seem real difficult ~ !!
~~~ as currently its stuck @ -->result from CGMiner : --- ~ >>> KLN0:0 unknown work (a0:51be99bff) - ignored --- ~ >>> KLN0:0 unknown work (a1:92cv34ofe) - ignored --- ~ >>> KLN0:0 unknown work (a1:xxxxxxxxx) - ignored --- ~ >>> KLN0:0 unknown work (a2:xxxxxxxxx) - ignored Anyone know the reason ?? Problem solve would means cheaper on Hardware ~ Labour cost free ! For 1st 50G Need help compiling cgminer/bfgminer? shoot me a pm. ive done it many times on linux. Cant help with firmware problems.
|
|
|
|
fasmax
|
|
December 23, 2013, 03:55:29 PM |
|
Looks like you dont used the patched cgminer version. You can also use BFGminer, which includes automatic detection of this boards.
Btw (not the problem here): Did you changed the chipcount to 16 in the code? The precompiled one is for the 10 chips board.
@form I know that the driver for gen2 Avalon needs to subtract 0x180 from the returned nonce but are there any other changes?
|
|
|
|
|