Bitmain E3 Ethash Miner ASIC (Batch 1 - Shipping:16-31 July. $800 USD)

[NoIdeaAsWell]

hi,

wonder if anyone can help me. so im using nanopool and im trying to change my payouts. how do i change this? it says password/email of my miner.

You are trying to log into the miner on the browser. Do that first.  its in your manual or try admin/admin username and password.  Then you click on Miner Configuration and change it there hit save, done.

Otherwise I dont know what you are saying.

[diabloblack]

So what is the consensus on the E3?  Is it hashing as advertised? Is it stable?  How are the temps?  Any particular pools that don't work?  Anyone had any experience setting one up on Mining Rig Rentals yet?  Thanks.

MRR works. Nothing special about setup.

Nicehash doesn't work.

Overall it looks like a solid miner. At the price I paid (around 2 ETH at the time) I have no regrets. I would not pay $2000 though, I'd rather build a GPU rig at that price.

How are you getting it to work on MRR properly?

For me, it connects fine and mines to my pool ok but if the renters' pool is not compatible or something it stops hashing. MRR refunded the renter twice in a short time. I contacted MRR for advice but all they literally said was "please ensure you have allpools enabled", which obviously isn't possible when you don't have access to the command line.

[suchmoon]

How are you getting it to work on MRR properly?

For me, it connects fine and mines to my pool ok but if the renters' pool is not compatible or something it stops hashing. MRR refunded the renter twice in a short time. I contacted MRR for advice but all they literally said was "please ensure you have allpools enabled", which obviously isn't possible when you don't have access to the command line.

I haven't run into such issues yet. If the renter's pool is not compatible then I don't think there is anything you can do but that would be a problem between MRR and the renter. Make it clear to MRR that you're using the E3. You might want to check the logs on the miner to see if there is anything that would help MRR debug the issue.

"allpools" is for claymore devfee, not relevant here. Claymore miner would stop if it can't mine the fee, which is probably what they're referring to.

[nastyrunner]

How are you getting it to work on MRR properly?

For me, it connects fine and mines to my pool ok but if the renters' pool is not compatible or something it stops hashing. MRR refunded the renter twice in a short time. I contacted MRR for advice but all they literally said was "please ensure you have allpools enabled", which obviously isn't possible when you don't have access to the command line.

I haven't run into such issues yet. If the renter's pool is not compatible then I don't think there is anything you can do but that would be a problem between MRR and the renter. Make it clear to MRR that you're using the E3. You might want to check the logs on the miner to see if there is anything that would help MRR debug the issue.

"allpools" is for claymore devfee, not relevant here. Claymore miner would stop if it can't mine the fee, which is probably what they're referring to.

Which Algorithm to choose for E3 to be on MRR?

[suchmoon]

Which Algorithm to choose for E3 to be on MRR?

Dagger-Hashimoto

[roc-noc]

hi,

wonder if anyone can help me. so im using nanopool and im trying to change my payouts. how do i change this? it says password/email of my miner.

In the Miner General Configuration where you entered your wallet address (User) - use the syntax "wallet.miner/email" (without the "").

wallet = your ETH wallet address
miner = a unique id to keep track of the miner
email = a working email address which is your password for the User Settings

In the following fictitious example:

0x9209111F793317B4A83f2701FC1Aa5c0Be9f3f.e3-1/jack@johndoe.com

wallet = 0x9209111F893317B4A83f2701FC1Aa5c0Be9f3f
miner = e3-1
email = jack@johndoe.com

Of course use your own wallet, miner, and email. 

[nastyrunner]

Which Algorithm to choose for E3 to be on MRR?

Dagger-Hashimoto

Thanks bud!

[boxalex]

anybody managed to get the E3 running for some more exotic coins like Moac for example.
Or the https://comining.io/ ethash coins mining pool? I had no luck on this one so far.

[Andartis]

Hey guys,
I ordered one E3 the day it came out. Regarding Bitmain, payment was received 9th of April. And my unit is still not shipped? Really? Even batch 4 guys are going to get their units shipped soon.

Anyone from first batch, who did not get the E3 yet?

Rgeards

[roc-noc]

Hey guys,
I ordered one E3 the day it came out. Regarding Bitmain, payment was received 9th of April. And my unit is still not shipped? Really? Even batch 4 guys are going to get their units shipped soon.

Anyone from first batch, who did not get the E3 yet?

Rgeards

My April 6th E3 order, paid USD April 8th, was shipped July 16th and has been mining for more than 1 week. 

I would open a support ticket about my order if not shipped yet.

Good luck.

[bittawm]

im selling one for 1800usd including shipping (shipped immediately)

[smaxz]

anyone else getting corrupt dag issues?

seems to correct itself promptly but still concerning for brand new units mining eth.

[Andartis]

Hey guys,
I ordered one E3 the day it came out. Regarding Bitmain, payment was received 9th of April. And my unit is still not shipped? Really? Even batch 4 guys are going to get their units shipped soon.

Anyone from first batch, who did not get the E3 yet?

Rgeards

Bitmain states, there is a problem with the customs and so they put every order on hold for my region....

[roc-noc]

Hey guys,
I ordered one E3 the day it came out. Regarding Bitmain, payment was received 9th of April. And my unit is still not shipped? Really? Even batch 4 guys are going to get their units shipped soon.

Anyone from first batch, who did not get the E3 yet?

Rgeards

Bitmain states, there is a problem with the customs and so they put every order on hold for my region....

What Country are you shipping to?

[Andartis]

What Country are you shipping to?

In this case Germany.

[vincl]

What Country are you shipping to?

In this case Germany.

just use UPS. only dhl makes problems in germany with antminers

[acidrush]

Are you guys getting any HW errors?

Chain#   ASIC#   Frequency   H/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status

1                                                              0
2                                                              5
3                                                              1
8                                                              0
9                                                              0
10                                                            5
11                                                            5
12                                                            1
13                                                            1

Thank you miner is not over clocked. Thank you!

[nastyrunner]

Are you guys getting any HW errors?

Chain#   ASIC#   Frequency   H/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status

1                                                              0
2                                                              5
3                                                              1
8                                                              0
9                                                              0
10                                                            5
11                                                            5
12                                                            1
13                                                            1

Thank you miner is not over clocked. Thank you!

Yeah, I am getting errors too. But isn't it normal, i mean, all of my miners do get errors.

[VoskCoin]

Put together a review on the bitmain antminer e3 for anyone that wants to watch + solved the issue w/ the error message causing a lot of e3 to not mine correctly

https://www.youtube.com/watch?v=nz2vgNnlSJY

[acidrush]

Are you guys getting any HW errors?

Chain#   ASIC#   Frequency   H/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status

1                                                              0
2                                                              5
3                                                              1
8                                                              0
9                                                              0
10                                                            5
11                                                            5
12                                                            1
13                                                            1

Thank you miner is not over clocked. Thank you!

Yeah, I am getting errors too. But isn't it normal, i mean, all of my miners do get errors.

Have not gotten any on the z9 mini