[JCE]Fast & stable CN/v8/Heavy/Tube/XHV miner, CPU+GPU, Vega56 1800+ RX580 1200+

[KriptoGuruTR]

no but Linux men love ultra-complex command lines
Seriously, Linux version will start with the same command-line based config

Ubuntu 18.04 LTS man here. Looking forward for the linux version.

[JCE-Miner]

https://github.com/jceminer/cn_cpu_miner/blob/master/jce028linux.jpeg?raw=true

Linux version x64 done, now porting to x86 and testing.

Linux prototype online 0.28
https://github.com/jceminer/cn_cpu_miner/raw/master/jce_cn_cpu_miner.linux.untested.028.zip

As its name implies, it's a very untested version. I just checked it works in most common cases, with or without SSL. The netcode was the hardest to port, i had to switch from Winsocks.

I found some bugs that exists in the windows version during port, i'll release a clean, tested full version Windows+Linux+doc updated later.
Both Linux 32 and Linux 64 are in the same .zip

[iisbetoq]

hi,

can i pointing to my daemon ?
and can you add this WebChain coin https://bitcointalk.org/index.php?topic=3649170.0

[JCE-Miner]

what deamon ?
i don't get your question...

be careful with version 0.28 it's a very early test version.

i plan to add fork --variation 10 ArtoCash and fork --variation 11 WebChain

[Testing Crypto]

https://github.com/jceminer/cn_cpu_miner/blob/master/jce028linux.jpeg?raw=true

Linux version x64 done, now porting to x86 and testing.

Linux prototype online 0.28
https://github.com/jceminer/cn_cpu_miner/raw/master/jce_cn_cpu_miner.linux.untested.028.zip

As its name implies, it's a very untested version. I just checked it works in most common cases, with or without SSL. The netcode was the hardest to port, i had to switch from Winsocks.

I found some bugs that exists in the windows version during port, i'll release a clean, tested full version Windows+Linux+doc updated later.
Both Linux 32 and Linux 64 are in the same .zip

   Tested good on Windows Vista, 7 & 10 + Linux Mint 18.3 Sylvia for the untested.028 build (still need to test Ubuntu 18.04, basically the same system though )

//having tested many miners (100's) over the years, great work && the best h/s per CPU than all others  

[JCE-Miner]

a warm thank, bro
afaik, it's the only cpu miner in assembly (and one of the only which is not a rip of Wolf0) so it's to be the fastest. i however got reported being slower on some Intel i7 or Xeon. i don't own one so i cannot optimize well yet.

[KriptoGuruTR]

Ubuntu 18.04 server LTS

Intel G4400 58 H/s. Autoconf. No largepage. Stable.

[Testing Crypto]

a warm thank, bro
afaik, it's the only cpu miner in assembly (and one of the only which is not a rip of Wolf0) so it's to be the fastest. i however got reported being slower on some Intel i7 or Xeon. i don't own one so i cannot optimize well yet.

  That would BTC the key to many systems or applications, optimizations are quite heavy when tuned right && having spent 10,000 hours over the years on just playing around with the basic hardware on all algorithms (configurations files). Still love to setup & test hardware, even if it's not going to earn many coins Kinda of a refresher course every week, so funny that people still think only sha256 or Scrypt are the only ones

[JCE-Miner]

Ubuntu 18.04 server LTS

Intel G4400 58 H/s. Autoconf. No largepage. Stable.

here's how to enable Huge Pages
https://wiki.debian.org/Hugepages#Enabling_HugeTlbPage

there's no "sudo" mode in jce like --elevate under linux, config must be done once by the user/admin

[iisbetoq]

what deamon ?
i don't get your question...

be careful with version 0.28 it's a very early test version.

i plan to add fork --variation 10 ArtoCash and fork --variation 11 WebChain

wallet deamon, so i can solo ?
and have a plan to add pointing with proxy ? i use this proxy https://github.com/sebseb7/cryptonote-proxy so i can switch to another coin without restart my miner

[Testing Crypto]

Ubuntu 18.04 server LTS

Intel G4400 58 H/s. Autoconf. No largepage. Stable.

here's how to enable Huge Pages
https://wiki.debian.org/Hugepages#Enabling_HugeTlbPage

there's no "sudo" mode in jce like --elevate under linux, config must be done once by the user/admin

it will double the h/s, configurations are key && only improving over the years of machine code

// never settle for basic stock settings, everything can be fine tuned && or improved (just because it is not broken does not mean it cant improve)
// even when you do something 100 times, the process will only git what path of steps taken (shortest path to transform one word into another = algorithms) && elevate like the present future of change

[JCE-Miner]

what deamon ?
i don't get your question...

be careful with version 0.28 it's a very early test version.

i plan to add fork --variation 10 ArtoCash and fork --variation 11 WebChain

wallet deamon, so i can solo ?
and have a plan to add pointing with proxy ? i use this proxy https://github.com/sebseb7/cryptonote-proxy so i can switch to another coin without restart my miner

i've chosen not to support proxies, it would be too easy to embedd jce into trojan/botnets. that's the choice Claymore did, and i'll go the same way.
you can mine alone on your pool, a sort of solomine, but it must be a real pool on real internet.

[sergneo]

JCE-Miner
With the release of a Linux version now have the time to create a version with a config file? I think it is not difficult to do. 

[JCE-Miner]

Not that diffucult, rather pretty boring, but planned, as low priority.
The linux version comes with a .sh that's the exact same as the .bat of windows versions.

Current dev is to add ArtoCash and Webchain forks (ho jeez, every coin has its own fork now, JCE supports 11 of them, it's flooding my assemblies).
I'll also update the documentation to make the cpu fine-tuning better documented.

[JCE-Miner]

hi,

can i pointing to my daemon ?
and can you add this WebChain coin https://bitcointalk.org/index.php?topic=3649170.0

Update: I looked at your fork, and... it goes too far. You redefined everything, including the nonce, the nicehash mode (that you removed), the blobsize, the Valide Share criteria, the endianness... it would need a whole dedicated netcode just for that coin, and i cannot make such a big change.
So i cancel support of Webchain coin. If you re-align your coin to Cryptonight convention, like the nonce at byte 39, i'll add it, but not with your current algo.

I note the xmrig fork you did at
https://github.com/webchain-network/webchain-miner
cannot mine any other coin than yours, so you know the problem : it's overcomplicated to support both normal Cryptonight and your variations.

edit: 0.29 done, now testing
changes :
backport Linux fixes to Windows version
new fork and new coin: Artocash

[JCE-Miner]

0.29 online - minor revision

Code:

New : ArtoCash
Windows bugfixes of bugs found during Linux port
More coins default to v7
Documentation updated

[siroliver]

mine works ok but has a n error releasing huge page memory when i hit q shows released next time i start it gets error i lodged off in logged back in sometime that helps but not now

[igotek]

how to make autogen your miner in linux ?

[JCE-Miner]

siroliver: i'd need more info to understand your problem, JCE version and error log at least.

igotek: JCE is close source, like Claymore. nothing to build, just download Linux version, unzip, edit start.sh to put in your wallet/pool and run it

[siroliver]

I run win 7 64bit ultimate 2600k 16gb ram
Failed to allocate 2 mb cache large page buffer running jce_cn_cpu_miner.027e 64bit i can find log file

here is my start.bat
@echo off

rem /!\ This is an EXAMPLE of miner start script, replace all EXAMPLE values with yours /!\

rem Pool address, can be a name or a dotted IP
rem Replace that EXAMPLE value with yours
set POOL=us-east.equihash-hub.miningpoolhub.com
rem Pool port, can be standard or SSL.
rem If SSL, see note below.
rem Replace that EXAMPLE value with yours
set PORT=20595


rem If you use a SSL port, change to: set SSL=--ssl
rem Otherwise leave empty
set SSL=--ssl

rem Your wallet. Some pools let you add extra information at the end like .PAYMENTID or .FIXEDDIFF
rem no problem, that's supported.
rem Replace that EXAMPLE value with yours
rem This is the donation wallet.
set WALLET=xxxx.cpu

rem 'x' almost always works, some pools let you put a Worker name here. Rarely important.
set PASSWORD=x

rem 0 is "automatic", you can force one of:
rem 1 = Original Cryptonight
rem 2 = Original Cryptolight
rem 3 = Cryptonight V7 fork of April-2018
rem 4 = Cryptolight V7 fork of April-2018
rem 5 = Cryptonight-Heavy
rem 6 = Cryptolight-IPBC
rem 7 = Cryptonight-XTL fork of May-2018
rem 8 = Cryptonight-Alloy
rem 9 = Cryptonight-MKT
set FORK=3

rem Auto-Select 32 or 64 bits, don't change
if defined BITS goto :SkipBits
set BITS=64
if x%PROCESSOR_ARCHITECTURE%==xx86 set BITS=32
:SkipBits

rem All is good ! Let's mine
@echo on
jce_cn_cpu_miner64.exe --auto --any --forever --variation %FORK% --low -o %POOL%:%PORT% -u %WALLET% -p %PASSWORD% %SSL% %*
@pause
Thanks
also mine did not detect my 64 bit cpu i had to modify it and mine is not showing how many items it found .