[ANN] QQCoin- Scrypt Jane, ASIC Resistant, N-Factor, Multipool Resistant

[cryptohunter]

ASIC PROOF - BOTH SHA256 AND SCRYPT ASIC PROOF

let's highlight some of qqcoins great points


no premine
fastest coin out there
asic proof
great name...

seems we are hiding qqc good points up for some reason.

[buddynuno]

What is going on with mining QQcoin at pooljunkie?

My miner just started to give me HW error and it is not accepting shares with the following settings:

qqcoinminer -o stratum+tcp://qqc.pooljunkie.nl:3333 -u username -p xxxx --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316 -I 17

Any ideas?

[lumberinvestments]

What is going on with mining QQcoin at pooljunkie?

My miner just started to give me HW error and it is not accepting shares with the following settings:

qqcoinminer -o stratum+tcp://qqc.pooljunkie.nl:3333 -u username -p xxxx --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316 -I 17

Any ideas?

The N-factor changed to 10, now N is 2048 and memory needed is 256 Kb (as in 128 Kb before). You need to lower your intensity or increase lookup gap.

Good luck

[sakamoto]

So we will have now 2 times less hashrate? On hd7950 I had ~500khash now I have ~250khash

[dr_yan_yan]

So we will have now 2 times less hashrate? On hd7950 I had ~500khash now I have ~250khash

Yes but ALL GPU's will have the lower Hashrate
So your Hashrate as a Percentage to the total will still stay the same.
So you will still be mining the same number of coins

[lumberinvestments]

So we will have now 2 times less hashrate? On hd7950 I had ~500khash now I have ~250khash

Yes but ALL GPU's will have the lower Hashrate
So your Hashrate as a Percentage to the total will still stay the same.
So you will still be mining the same number of coins

Not on all cards. Some of my 30+ cards (most of it R9 290) are not making it even to 200 kh/sec, from up to 650-690 kh/sec. I don't know why and I need to look more into it. Some I have at 320 kh/sec which is fine.
The earnings might be lesser, as soon as the change happened the difficulty changed to more than half of previous difficulty thus meaning that some part of the network (CPU's) are more efficient thus leaving a little less part of network for the videocards that are less efficient.

The N-factor starts to be felt I think and the efficiency of videocards is decreasing. We will see what happens at the next N-factor in 12 more days.

[porcupine87]

ASIC PROOF - BOTH SHA256 AND SCRYPT ASIC PROOF

let's highlight some of qqcoins great points


no premine
fastest coin out there
asic proof
great name...

seems we are hiding qqc good points up for some reason.

This is marketing 101. There are so many new coins out there. So what is different with this coin? Sure, the 20s confirmation time. I can't think of something other...

btw: I don't like the qqco.in site. It's so full and dirty. Look at a site like this. Clean and nice: http://www.q2c.cc/

[qqcoins]

Unfortunately I can not please everybody. As a developer you get used to it.

[dr_yan_yan]

Not on all cards. Some of my 30+ cards (most of it R9 290) are not making it even to 200 kh/sec, from up to 650-690 kh/sec. I don't know why and I need to look more into it. Some I have at 320 kh/sec which is fine.
The earnings might be lesser, as soon as the change happened the difficulty changed to more than half of previous difficulty thus meaning that some part of the network (CPU's) are more efficient thus leaving a little less part of network for the videocards that are less efficient.

The N-factor starts to be felt I think and the efficiency of videocards is decreasing. We will see what happens at the next N-factor in 12 more days.

I had to adjust nearly all my settings to get the best efficiency again.
Thread Concurrency, Worksize, Lookup gap, Intensity, GPU threads  etc...

If i left it at the previous setting and just adjusted the Intensity till i stopped getting Errors, then it was half the KH/s of what i am getting now.

Redo your settings completely, see how you go.


And yes you are correct about the CPU maintaining efficiency

[buddynuno]

Not on all cards. Some of my 30+ cards (most of it R9 290) are not making it even to 200 kh/sec, from up to 650-690 kh/sec. I don't know why and I need to look more into it. Some I have at 320 kh/sec which is fine.
The earnings might be lesser, as soon as the change happened the difficulty changed to more than half of previous difficulty thus meaning that some part of the network (CPU's) are more efficient thus leaving a little less part of network for the videocards that are less efficient.

The N-factor starts to be felt I think and the efficiency of videocards is decreasing. We will see what happens at the next N-factor in 12 more days.

I had to adjust nearly all my settings to get the best efficiency again.
Thread Concurrency, Worksize, Lookup gap, Intensity, GPU threads  etc...

If i left it at the previous setting and just adjusted the Intensity till i stopped getting Errors, then it was half the KH/s of what i am getting now.

Redo your settings completely, see how you go.


And yes you are correct about the CPU maintaining efficiency

Can you post a sample of what settings are you using now to mine if you please?

[phinino]

ASIC PROOF - BOTH SHA256 AND SCRYPT ASIC PROOF

let's highlight some of qqcoins great points


no premine
fastest coin out there
asic proof
great name...

seems we are hiding qqc good points up for some reason.

agree!
make this in a new post and start a new topic out there could be better, AAN the promotions recelty in the mean time, add some guide to mine、exchange、store、games……also.
my point is that there should be a new topic to show up the progress and advantage of QQC

[lumberinvestments]

Not on all cards. Some of my 30+ cards (most of it R9 290) are not making it even to 200 kh/sec, from up to 650-690 kh/sec. I don't know why and I need to look more into it. Some I have at 320 kh/sec which is fine.
The earnings might be lesser, as soon as the change happened the difficulty changed to more than half of previous difficulty thus meaning that some part of the network (CPU's) are more efficient thus leaving a little less part of network for the videocards that are less efficient.

The N-factor starts to be felt I think and the efficiency of videocards is decreasing. We will see what happens at the next N-factor in 12 more days.

I had to adjust nearly all my settings to get the best efficiency again.
Thread Concurrency, Worksize, Lookup gap, Intensity, GPU threads  etc...

If i left it at the previous setting and just adjusted the Intensity till i stopped getting Errors, then it was half the KH/s of what i am getting now.

Redo your settings completely, see how you go.


And yes you are correct about the CPU maintaining efficiency

Well, I am trying to use the same settings as in the cards that are getting 300 kh/sec or 350 kh/sec. It is practically the same model of card, same brand. I have to go down with the settings until I reach only 150 Kh/sec otherwise it will crash !
I will wait until someone will be near the computers (as I am 10 000 kilometers away from my farm) and then try more settings as if I crash the computers no one can reset it.

I am thinking to make a device to remotely control the farm's computer's reset and power buttons, I am wondering if anyone would be interested to buy such a device here.. then I might go ahead with the project..

[dr_yan_yan]

Well, I am trying to use the same settings as in the cards that are getting 300 kh/sec or 350 kh/sec. It is practically the same model of card, same brand. I have to go down with the settings until I reach only 150 Kh/sec otherwise it will crash !
I will wait until someone will be near the computers (as I am 10 000 kilometers away from my farm) and then try more settings as if I crash the computers no one can reset it.

I am thinking to make a device to remotely control the farm's computer's reset and power buttons, I am wondering if anyone would be interested to buy such a device here.. then I might go ahead with the project..

Most Motherboards have that function now anyway.

WAKEONLAN  i think it is called

[dr_yan_yan]

Can you post a sample of what settings are you using now to mine if you please?

These are my settings...

qqcoinminer -o stratum+tcp://stratum.cipherpool.com:8842 -u user.worker -p passw --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316 -I 16 -w 512 -g 2 --auto-fan --thread-concurrency 8192 --scan-time 5 --lookup-gap 2

i get 1% HW errors with this.

I basically had to adjust these settings to get it working

-w 512 (i previously had it at 256)
-g 2 (i previously did not have this)
--lookup-gap 2 (i previously did not have this)
-i 16 (i had to play around with this a few times... it ranged from 11 to 17 depending on what other settings i used)

[psybase64]

Well, I am trying to use the same settings as in the cards that are getting 300 kh/sec or 350 kh/sec. It is practically the same model of card, same brand. I have to go down with the settings until I reach only 150 Kh/sec otherwise it will crash !
I will wait until someone will be near the computers (as I am 10 000 kilometers away from my farm) and then try more settings as if I crash the computers no one can reset it.

I am thinking to make a device to remotely control the farm's computer's reset and power buttons, I am wondering if anyone would be interested to buy such a device here.. then I might go ahead with the project..

Most Motherboards have that function now anyway.

WAKEONLAN  i think it is called

I think something like this is more what he had in mind.

12-Port Power Over the NET™ (PDU) - http://tinyurl.com/ptpz76u

[dr_yan_yan]

I think something like this is more what he had in mind.

12-Port Power Over the NET™ (PDU) - http://tinyurl.com/ptpz76u

That is fucking sexy!

[psybase64]

I think something like this is more what he had in mind.

12-Port Power Over the NET™ (PDU) - http://tinyurl.com/ptpz76u

That is fucking sexy!

;-)

Add a KVM over IP to that and you have complete control over remote PCs.

[yonghongtang]

http://www.allcrypt.com/beta/voting.php
another voting has been started from 10,020. keep you eyes here in next 48 hours.if the voting done in advance , i'll let you know

donation record :(thank all of you,please accept my sincere repects)
100  QQC  from BloodOnSunday
15   QQC  from amertak
250  QQC  from vipin.khatri20
1000 QQC  from dr_yan_yan
101  QQC  from rentarocker
450  QQC  from vipin.khatri20 (twice)
500  QQC  from sands_reyer
total received QQC :2,416. i'll use them for promotion.
donators please participate into QQ group 305099938, we can talk about how to promote QQC.
when you apply for adding into this QQ group , please do make a comment like "from bitcointalkforum" or "donator".if no comment ,you will be refused ,LOL

any donation is welcome.
without donation, i'll do what i can do .
with donation, i can do more.
donation QQC  :  QijSMLZkTDapfaHaXb7y6uXdiuqfdPKKnN

[porcupine87]

Unfortunately I can not please everybody. As a developer you get used to it.

The problem is, that you have the informations about the Jane-Scrypt. It would take you maybe 15min to set this informations on the web page. And it would help the coin really. Can you at least give me the source file, where I can find informations about the Jane-Scrypt?

[trid]

http://www.allcrypt.com/beta/voting.php
another voting has been started from 10,020. keep you eyes here in next 48 hours.if the voting done in advance , i'll let you know

donation QQC  :  QijSMLZkTDapfaHaXb7y6uXdiuqfdPKKnN

Keep up the good work

500qqc sent