[ANN] QQCoin- Scrypt Jane, ASIC Resistant, N-Factor, Multipool Resistant

[cryptohunter]

Have a few to sell, 45828 for 4 BTC - PM and we can go through escrow.

Holy Fu what kind of setup you got or you got in when the difficulty was 0?

Started 2:30 am uk time this morning after I spotted it lol - got 8000kh/s capacity and put 6000kh/s on this for 10 hours or so ...

Damn. I wanted to turn on my measly 1500khs on as well at the same time, but didnt hit any blocks so turned it off..
well I guess too late now since difficulty has jumped SOOOOOOOOO much!

still mining a few blocks with 3mh so can easily still get coins.

[ndndr]

http://qqc.cipherpool.com/index.php I am using this pool, why does it keep on saying share is above target ?

[Don007]

Have a few to sell, 45828 for 4 BTC - PM and we can go through escrow.

Holy Fu what kind of setup you got or you got in when the difficulty was 0?

Started 2:30 am uk time this morning after I spotted it lol - got 8000kh/s capacity and put 6000kh/s on this for 10 hours or so ...

Damn. I wanted to turn on my measly 1500khs on as well at the same time, but didnt hit any blocks so turned it off..
well I guess too late now since difficulty has jumped SOOOOOOOOO much!

still mining a few blocks with 3mh so can easily still get coins.

Solo? Or do you mean in a pool? I think 3 MH/s is a bit less to solo-mine, but i'm not sure about that.

[sitefive]

did a trade with TRID ,awesome seller,fast trade and cut me a great deal!

[suchnoob]

Can I make a config file like for cgminer and what to put in it? (besides settings). Getting a lot of rejects >10%

[cointoss]

Can I make a config file like for cgminer and what to put in it? (besides settings). Getting a lot of rejects >10%

I was getting ~8% rejects on -I 20, now I'm getting about ~2% on -I 18 and I didn't lose any hashes. (I just added '-I 18' to the .bat file.)

[Sanglotslongs]

3. Configure your miner.
Settings for Stratum (recommended):

STRATUM:   stratum+tcp://goober.homeunix.net
PORT:   3333
Username:   Weblogin.Worker
Password:   Worker Password
If you use a command-line miner, type:

qqcoinminer.exe -o stratum+tcp://goober.homeunix.net:3333 -u Weblogin.Worker -p Worker password --scrypt  --Nfmin 4 --Nfmax 30 --StartT 1387769316

So, where i write this settings ? I downloaded the miner and extrate in a folder... Sorry i'm a noob in mining !
P.S : I create account, worker and qqadress...

[Fraxinus]

Is someone here selling some coins, just a few ? pm me!

[suchnoob]

Can I make a config file like for cgminer and what to put in it? (besides settings). Getting a lot of rejects >10%

I was getting ~8% rejects on -I 20, now I'm getting about ~2% on -I 18 and I didn't lose any hashes. (I just added '-I 18' to the .bat file.)

I'm getting about 12% on -I 17. What settings besides that you use?

[Don007]

If you want to mine in a pool:

1. Download the miner in the first post of this topic
2. Right click with your mouse on 'pool-miner.bat'
3. Fill in the correct pool URL, workername and workerpassword.

An example of the line you see there is:

qqcoinminer -o stratum+tcp://server1.cryptovalley.com:1212 -u Don007.1 -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316 -I 18

This means that i'm connected to the Cryptovalley pool, my workername is Don007.1 and my workerpassword is "x".  

Don't forget to register at a pool and create a worker before doing step 1, 2 and 3! Goodluck!

[cointoss]

Can I make a config file like for cgminer and what to put in it? (besides settings). Getting a lot of rejects >10%

I was getting ~8% rejects on -I 20, now I'm getting about ~2% on -I 18 and I didn't lose any hashes. (I just added '-I 18' to the .bat file.)

I'm getting about 12% on -I 17. What settings besides that you use?

Mine is the default solo-miner.bat file with -I 18 added:

Code:

qqcoinminer -o http://pool.pool.pool -u YourUser -p YourPass --scrypt --Nfmin 4 --Nfmax 30 --StartT 1387769316 -I 18

What card & drivers are you using?

[suchnoob]

2 cards: a 290x and a 7950 on default clocks and low voltage. Drivers 13.12 b9.5

my settings are default + -I 17,17 -w 512,256 --thread-concurrency 32xxx, 24xxx and I'm getting ~ 4.5MH/s with first and 3.7 with second.

I wonder what settings the guys with 6MH/s on a 7970 are using ^^

[peterlustig]

Stratum enabled CPU miner source and linux binary: http://www62.zippyshare.com/v/45755076/file.html
2 cores of i7 920 get me 120kH/s.
Is there interest in a windows version?

yes please for the windows version

Sorry I fail, it's so annoying and complicated on Windows to compile stuff! Someone else will have to do it.

[cointoss]

2 cards: a 290x and a 7950 on default clocks and low voltage. Drivers 13.12 b9.5

my settings are default + -I 17,17 -w 512,256 --thread-concurrency 32xxx, 24xxx and I'm getting ~ 4.5MH/s with first and 3.7 with second.

I wonder what settings the guys with 6MH/s on a 7970 are using ^^

I've got the 7950s at --thread-concurrency 25984, +20 powertune, 1100 Core / 1400 Mem.

I'm getting 2.45Mh/s with each card on 13.4 drivers. Jeeze... Maybe I need to upgrade drivers...

Some earlier mentioned that with the latest N adjustment they are getting 3.3Mh/s on their cards. 3.3Mh/s + 12% is about 3.7Mh/s.

It's weird how people are getting wildly different results with the same cards and similar settings.

[JamesBolivar]

Getting 4.850 at 1100/1500 with "-g 2 -I 18 --thread-concurrency 12000" at 1100mV from my R9 280X Matrix Platinum around 70C with 60% Fans pulling 200W more than idle at the wall. Drivers 13.12 and hashing at CryptoValley.

[ads2003uk]

Started at 23:15 here in the UK.

Using HD6950.

Standard solo-mining settings, no amendments to any of the settings.
Only thing I've done is had to increase SpeedFan from 70 to 80% as it's a dodgy card and trips out when ever it hits 65deg.

Ybcminer screen shot:




I'm new to all this BitCoin and Alt coin (4 usb erupters on Freicoin) so I dont know if the above is ok or not...

[sydeu]

no block for 30 minutes on http://qqcoin.altexc.com/ seems very weird. Has it forked or something?

edit: nvm must have been som error or something for me. Lots of blocks found.

[cryptohunter]

Diff gone mad..... huge amount of miners piling in to this one.  I see clones popping up of it already .

Yeah i agree, it is so strange how people with the same cards are getting such wildly different hash rates.

Send some of this coin out, it is crazy fast.

[Pajkho]

Which is the best pool currently?

I have tried altexc, cipherpool and homeunix but all of them seems to be overloaded.

altexc and cipherpool takes time to get your coins and see the correct stats. homeunix seems to have some issues, giving no coins currently.

[cryptohunter]

Which is the best pool currently?

I have tried altexc, cipherpool and homeunix but all of them seems to be overloaded.

altexc and cipherpool takes time to get your coins and see the correct stats. homeunix seems to have some issues, giving no coins currently.

you can still solo mine it ....pool is better for really low hash but if you have a few 7950s the blocks still roll in now and then.

One of the QQ super whales should do a decent give away really, i don't see one on the board yet.

Also where is the dev?