[ANN] microCoin MRC - alcurEX - Scrypt-Jane - nFactor

[DjNorad]

Sure I'm in too.
I have no time to help much but I will support your "mission" with coins sure.

Same for me if i see there is a good plan

[organizer]

Tier 3:
Nobody tells wolong this coin exists!

Nobody gets nervous and dumps their coins during a correction.

This coin will be fine.

Wolong knows about this coin, he's the one who pumped it before the PANDA fiasco on Mintpal, apparently caught their devs at the 12sat level or so, lol.

[snguyen]

Dear all,

Anyone know how to config and make a 7790 run, I have tried many settings, but all of them lead to zero Acc and lot of HW 

The latest attempt: I14, Tc7000, G800, M1500:

[P]ool management [G]PU management ettings [D]isplay options [Q]uit
 GPU 0:  45.0C  36%    | 16.66K/17.24Kh/s | A:0 R:0 HW:16 WU:0.0/m I:14
 GPU 1:  46.0C  36%    | 16.33K/16.84Kh/s | A:0 R:0 HW: 9 WU:0.0/m I:14
 GPU 2:  49.0C  35%    | 79.64K/82.21Kh/s | A:0 R:0 HW:52 WU:0.0/m I:14
 GPU 3:  47.0C  36%    | 16.64K/17.24Kh/s | A:0 R:0 HW:10 WU:0.0/m I:14
 GPU 4:  52.0C  40%    | 16.66K/17.24Kh/s | A:0 R:0 HW:10 WU:0.0/m I:14

Thank you!

[Gaboer]

Anyone on nut2pools?
https://mrc.nut2pools.com/index.php?page=statistics&action=blocks

No blocks for 3 hours, and last block has 0 shares....what could be wrong?

[MicroCC]

Is this coin fading into the abyss, seems like every time I check the price it drops. Perhaps the devs shouldn't have created superblocks going up to 160k 

[Del137]

Yet no news from MRC dev's i wish they promote coin much faster in this damn fast and changing cryptocurrencies world. Be silent - be ignored.
There was mistake to delay alcurex exchange release, because highest reward blocks will be before its release.  (imho)

[spiffcow]

Dev has abandoned this coin, or somehow thinks it'll serve his side project alcurex.  It's our job to make sure this coin gets on some good exchanges before it's too late.  If it hits cryptsy or coinedup and people see that it's at peak rewards, they'll hop on.  More miners means more interest means more $$$.

[banokyo]

Dear all,

Anyone know how to config and make a 7790 run, I have tried many settings, but all of them lead to zero Acc and lot of HW 

The latest attempt: I14, Tc7000, G800, M1500:

[P]ool management [G]PU management ettings [D]isplay options [Q]uit
 GPU 0:  45.0C  36%    | 16.66K/17.24Kh/s | A:0 R:0 HW:16 WU:0.0/m I:14
 GPU 1:  46.0C  36%    | 16.33K/16.84Kh/s | A:0 R:0 HW: 9 WU:0.0/m I:14
 GPU 2:  49.0C  35%    | 79.64K/82.21Kh/s | A:0 R:0 HW:52 WU:0.0/m I:14
 GPU 3:  47.0C  36%    | 16.64K/17.24Kh/s | A:0 R:0 HW:10 WU:0.0/m I:14
 GPU 4:  52.0C  40%    | 16.66K/17.24Kh/s | A:0 R:0 HW:10 WU:0.0/m I:14

Thank you!

try lowering the intensity. mine worked at intensity 12.

[DjNorad]

Anyone on nut2pools?
https://mrc.nut2pools.com/index.php?page=statistics&action=blocks

No blocks for 3 hours, and last block has 0 shares....what could be wrong?

this happened before... there seems to be hanging a cron job at the server which refreshes statistical-data

in the past all shares were still processed and we all got our coins which were found in between as soon as this deamon was restarted....

[sillyputti]

I'm trying to do some microCoin development.

How do you run a microCoin daemon?

and what's the best way to get in touch with the devs so I don't do redundant work?

[sillyputti]

I'm trying to do some microCoin development.

How do you run a microCoin daemon?

reading through: https://github.com/microcoinsource/microcoin/blob/master/doc/build-unix.txt

kind of stuck at compiling the source on Ubuntu13.10

% make -f makefile.unix
g++ -c -O2 -msse2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/root/microcoin/src -I/root/microcoin/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -DSCRYPT_KECCAK512 -DSCRYPT_CHACHA -DSCRYPT_CHOOSE_COMPILETIME -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2  -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
alert.cpp:5:29: fatal error: boost/foreach.hpp: No such file or directory
 #include <boost/foreach.hpp>
                             ^
compilation terminated.
make: *** [obj/alert.o] Error 1


any help appreciated.

[DjNorad]

Anyone on nut2pools?
https://mrc.nut2pools.com/index.php?page=statistics&action=blocks

No blocks for 3 hours, and last block has 0 shares....what could be wrong?

this happened before... there seems to be hanging a cron job at the server which refreshes statistical-data

in the past all shares were still processed and we all got our coins which were found in between as soon as this deamon was restarted....

it just happened as i announced...   all coin and statistics are back online.... nothing was lost...

[forgetme]

All this discussion reminds me of Litecoin an year ago..

[alexit873]

Wouldn't be bad if MicroCoin would be the son of litecoin and the nephew of bitcoin  .
Go Micro!!!

[Nutnut]

Anyone on nut2pools?
https://mrc.nut2pools.com/index.php?page=statistics&action=blocks

No blocks for 3 hours, and last block has 0 shares....what could be wrong?

this happened before... there seems to be hanging a cron job at the server which refreshes statistical-data

in the past all shares were still processed and we all got our coins which were found in between as soon as this deamon was restarted....

Yeah - sorry guys, as usual, when a cron hangs it's a few minutes after i go to bed.

Nothing is lost, all that happens is the scheduled task that updates the site with the new blocks in the wallet hangs. As a result, they are still mined just not reflected in the pool. Once the cron is reset, it scans the wallet for all "unaccounted" blocks and updates the pool and user accounts accordingly.

Bottom line is, (and this generally applies to any pool), provided your shares are being accepted and the block template is changing in cgminer, you have nothing to worry about.

Regards

Nut

Side note, if the blocksolved admins are here, i think you may have a wallet issue - one of our miners mentioned it in a support ticket.. 130 orphans in the last 24 hours...

[halibit]

I'm trying to do some microCoin development.

How do you run a microCoin daemon?

reading through: https://github.com/microcoinsource/microcoin/blob/master/doc/build-unix.txt

kind of stuck at compiling the source on Ubuntu13.10

% make -f makefile.unix
g++ -c -O2 -msse2 -pthread -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -g -DBOOST_SPIRIT_THREADSAFE -I/root/microcoin/src -I/root/microcoin/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -DSCRYPT_KECCAK512 -DSCRYPT_CHACHA -DSCRYPT_CHOOSE_COMPILETIME -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2  -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
alert.cpp:5:29: fatal error: boost/foreach.hpp: No such file or directory
 #include <boost/foreach.hpp>
                             ^
compilation terminated.
make: *** [obj/alert.o] Error 1


any help appreciated.

Try to install you boost again.
As you see error is: boost/foreach.hpp: No such file or directory

Here is how I install it: Ubuntu 12.04.3 x64
Type these to update the system, and install required tools.

Code:

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install libqtgui4 qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev git
sudo apt-get install libboost-all-dev
sudo apt-get install libboost1.48-all-dev

Next, get the microcoin source code from git.

Code:

git clone https://github.com/microcoinsource/microcoin.git

Navigate to the src directory and begin the compilation.

Code:

cd microcoin/src/
make -f makefile.unix USE_UPNP=-

Copy microcoind somewhere to make it executable for every user on the system.

Code:

cp microCoind /usr/bin/microCoind

Try to start microcoind:

Code:

./microCoind

You can see the path where you need to put conf file:
Usually it is: /root/.microCoin/

Make your conf file in there:

Code:

nano /root/.microCoin/microCoin.conf

Put in your conf file:

Code:

server=1
daemon=1
rpcuser=user
rpcpassword=x
rpcport=3333
rpcallowip=*

Start microcoind:

Code:

./microCoind

You're done.

[alexit873]

Here Is my Logo maybe is a little late 


https://i.imgur.com/8bAaWLt.png

[Freyja]

Hello guys! Please tell me how to properly configure the card HD 7950 on asus coin microCoin? I just issue a maximum of 240 kh / s, seen on screen that r9 290x issue megahesh 7-9. How to configure graphics card, please help ...
screenshot

The following settings is for my 7950 and gives me 295kh with scrypt-jane (MRC).

Code:

--Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 --no-submit-stale -g 2 --thread-concurrency 8192 --gpu-memclock 1150 --gpu-engine 950 --intensity 12

[Del137]

Scrypt Jane make some cards faster than with simple Scrypt
 
For example r9 280x has like 315 Kh/s and 7950 almost 305 kh/s

[halibit]

Hello guys! Please tell me how to properly configure the card HD 7950 on asus coin microCoin? I just issue a maximum of 240 kh / s, seen on screen that r9 290x issue megahesh 7-9. How to configure graphics card, please help ...

The speed varies with different computers and GPU's, even I have all same models my speed is between 190 - 287
I think 240 is not so bad.
I use script:
--scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 4 --expiry 2
I have -I 17, 19 and 20
This because some GPU's crash if I use higest I.