glinko
Jr. Member
Offline
Activity: 37
Merit: 6
|
|
May 05, 2014, 08:39:04 AM |
|
Buying wall on mintpal is melting down (from 30 to 20 BTC). I am wondering if I should sell all MRC I have there, since very soon it might become invalid (I think mintpal has not updated wallet yet, and now we will have 3 versions of MRC soon ). I have lost 10 mil on poloniex, I sent them 2 days ago but it never appears on my balance. Helpdesk have not responded yet. A lot of bad signs for the coin. So another person with a missing MRC deposit at Polo. That makes me feel better haha. I'm sure they will get it sorted out quickly. Transmited 5.5 mil two days ago to poloniex. Wrote to support why I cant see my depo (mrc). yesterday they solve my problem. so support working fine. Today send some coins again and not resived again... waiting for solution\updating They seems to be correct MRC wallet anyway I just send few coins and deposit history show: MRC 5.5 2014-05-05.07:35:09 PENDING (16 of 15 confirmations) It takes 15min. yep. my depo confirmed too!
|
|
|
|
snguyen
Member
Offline
Activity: 98
Merit: 10
One life. Live it.
|
|
May 05, 2014, 08:43:12 AM |
|
All exchange and pools are informed. Mintpal sent note they are updated wallet.
Poloniex I don't know, but I just test withdraw and it works fine. Next I will send deposit.
Correct blocks will start continue after block 318000 with code:
else if (nHeight <= 318000) // 0.01 block rewards (wrong logic as coin spec, but we need to keep it because it's already happened) { nSubsidy = (3100 - ((nHeight * 0.01) - 310000)) - 300000; }
else { nSubsidy = (10000 - ((nHeight - 318000) * 0.01)) * COIN; if (nSubsidy <= 1000 * COIN) nSubsidy = 1000 * COIN; // Rest of blocks are 1000 coins. Then network working forever with stake blocks. }
Halibit, if you decide to use my code, use it correctly. I picked 320,000 just a number to show the logic. If you picked 318,000 instead, then please update the code accordingly. There are 2 places needed to change but you only updated one . This time, please upload the correct fix, or give me a review permission at least. I need only one minute to tell if the code works or not.
|
|
|
|
halibit
Legendary
Offline
Activity: 1596
Merit: 1006
|
|
May 05, 2014, 09:06:57 AM |
|
All exchange and pools are informed. Mintpal sent note they are updated wallet.
Poloniex I don't know, but I just test withdraw and it works fine. Next I will send deposit.
Correct blocks will start continue after block 318000 with code:
else if (nHeight <= 318000) // 0.01 block rewards (wrong logic as coin spec, but we need to keep it because it's already happened) { nSubsidy = (3100 - ((nHeight * 0.01) - 310000)) - 300000; }
else { nSubsidy = (10000 - ((nHeight - 318000) * 0.01)) * COIN; if (nSubsidy <= 1000 * COIN) nSubsidy = 1000 * COIN; // Rest of blocks are 1000 coins. Then network working forever with stake blocks. }
Halibit, if you decide to use my code, use it correctly. I picked 320,000 just a number to show the logic. If you picked 318,000 instead, then please update the code accordingly. There are 2 places needed to change but you only updated one . This time, please upload the correct fix, or give me a review permission at least. I need only one minute to tell if the code works or not. I deside to use your code and you right about I should then ask final code. So, here is whole code I will use: Can you confirm? // microCoin block size. int64 nSubsidy = 1 * COIN; if(nHeight < 10000) { nSubsidy = 0.0001 * COIN; // Premining 1 coin. (10000 blocks * 0.0001 coins) = Total 1 coin. ** For network security purpose. (Needed with the fair launch). } else if(nHeight >= 10000 && nHeight < 160000) // Launch start. Increasing block size on every blocks +1. ** Blocks: 1001 - 160000 { nSubsidy = nHeight * COIN; } else if (nHeight >= 310000 && nHeight <= 315000) // 310,000 block rewards, decreasing 0.01 on every block { nSubsidy = (310000 - ((nHeight - 310000) * 0.01)) * COIN; }
else if (nHeight <= 318000) // 0.01 block rewards (wrong logic as coin spec, but we need to keep it because it's already happened) { nSubsidy = (3100 - ((nHeight * 0.01) - 310000)) - 300000; }
else { nSubsidy = (10000 - ((nHeight - 318000) * 0.01)) * COIN; if (nSubsidy <= 1000 * COIN) nSubsidy = 1000 * COIN; // Rest of blocks are 1000 coins. Then network working forever with stake blocks. }
return nSubsidy; }
|
|
|
|
snguyen
Member
Offline
Activity: 98
Merit: 10
One life. Live it.
|
|
May 05, 2014, 09:22:59 AM |
|
I deside to use your code and you right about I should then ask final code. So, here is whole code I will use: Can you confirm? // microCoin block size. int64 nSubsidy = 1 * COIN; if(nHeight < 10000) { nSubsidy = 0.0001 * COIN; // Premining 1 coin. (10000 blocks * 0.0001 coins) = Total 1 coin. ** For network security purpose. (Needed with the fair launch). } else if(nHeight >= 10000 && nHeight < 160000) // Launch start. Increasing block size on every blocks +1. ** Blocks: 1001 - 160000 { nSubsidy = nHeight * COIN; } else if (nHeight >= 310000 && nHeight <= 315000) // 310,000 block rewards, decreasing 0.01 on every block { nSubsidy = (310000 - ((nHeight - 310000) * 0.01)) * COIN; }
else if (nHeight <= 318000) // 0.01 block rewards (wrong logic as coin spec, but we need to keep it because it's already happened) { nSubsidy = (3100 - ((nHeight * 0.01) - 310000)) - 300000; }
else { nSubsidy = (10000 - ((nHeight - 318000) * 0.01)) * COIN; if (nSubsidy <= 1000 * COIN) nSubsidy = 1000 * COIN; // Rest of blocks are 1000 coins. Then network working forever with stake blocks. }
return nSubsidy; } Thank you for asking me this. I strongly believe this code will work as expected. Best regards,
|
|
|
|
lunswor
|
|
May 05, 2014, 09:28:22 AM |
|
I deside to use your code and you right about I should then ask final code. So, here is whole code I will use: Can you confirm? // microCoin block size. int64 nSubsidy = 1 * COIN; if(nHeight < 10000) { nSubsidy = 0.0001 * COIN; // Premining 1 coin. (10000 blocks * 0.0001 coins) = Total 1 coin. ** For network security purpose. (Needed with the fair launch). } else if(nHeight >= 10000 && nHeight < 160000) // Launch start. Increasing block size on every blocks +1. ** Blocks: 1001 - 160000 { nSubsidy = nHeight * COIN; } else if (nHeight >= 310000 && nHeight <= 315000) // 310,000 block rewards, decreasing 0.01 on every block { nSubsidy = (310000 - ((nHeight - 310000) * 0.01)) * COIN; }
else if (nHeight <= 318000) // 0.01 block rewards (wrong logic as coin spec, but we need to keep it because it's already happened) { nSubsidy = (3100 - ((nHeight * 0.01) - 310000)) - 300000; }
else { nSubsidy = (10000 - ((nHeight - 318000) * 0.01)) * COIN; if (nSubsidy <= 1000 * COIN) nSubsidy = 1000 * COIN; // Rest of blocks are 1000 coins. Then network working forever with stake blocks. }
return nSubsidy; } Thank you for asking me this. I strongly believe this code will work as expected. Best regards, So were not going to have the fix until block 318000? 316000 should be fine in my opinion. There is only two pools out there with any hash rate, and it will take ages to reach 318000 with no miners. Lets just get exchanges to freeze/fix the wallet and the two pools to update and we fix at block 316000. We can warn everyone not to send coins to the exchanges until the all confirm they are updated.
|
|
|
|
reftop123
|
|
May 05, 2014, 11:05:44 AM |
|
Block times are normal - difficulty dropping.
|
|
|
|
reftop123
|
|
May 05, 2014, 02:02:27 PM |
|
I think what it is very good for coin, when devs, even in this situation, not annoys people with technical posts or explanations, etc. Just not showing up. Really good!
|
|
|
|
|
Hilux74
Legendary
Offline
Activity: 912
Merit: 1000
|
|
May 05, 2014, 02:44:14 PM |
|
Lol why bother switching to that account to make the announcement. Just stay as Halibut.
|
|
|
|
Del137
|
|
May 05, 2014, 02:48:05 PM |
|
Tnx for update!
Let's All who really support MRC help it as it help us and continue blocks calculation.
|
|
|
|
luohuiao
Newbie
Offline
Activity: 11
Merit: 0
|
|
May 05, 2014, 02:55:51 PM |
|
I think alcurEx and microCoin need a proffesional team,that about coding and marketing. There's a good start,but the abilities of development and advertisement are poor. Can alcurEx use IPO funds to make much more effort? That's too long a way according to nowa situation.
|
|
|
|
Bansheroom
|
|
May 05, 2014, 03:23:04 PM |
|
I think alcurEx and microCoin need a proffesional team,that about coding and marketing. There's a good start,but the abilities of development and advertisement are poor. Can alcurEx use IPO funds to make much more effort? That's too long a way according to nowa situation. Microcoin had no premine and no IPO, so how should a professional team for Microcoin be financed? Regarding to alcurex, part of the IPO is used to get the exchange coded, it would be nice if it goes faster, but there is no real reason to hurry things. Better get it well done and secure, Poloniex has been hacked for the 2nd time already and is up some months only. At the time i write this 50% of what poloniex owes the users from the first hack is not even paid back. 2nd hack did little or no damage at all, but just because there was some luck involved. Do you want similar things happen to alcurex?
|
Always get cryptonews, free bitcoins, free altcoins and free mining opportunities: follow @Bansheroom on Twitter
|
|
|
Don007
Legendary
Offline
Activity: 1050
Merit: 1007
Live like there is no tomorrow!
|
|
May 05, 2014, 04:30:19 PM Last edit: May 05, 2014, 04:45:19 PM by Don007 |
|
Currently my client won't open. The old one doesn't, and the new one doesn't.
It does open, but it doesn't show up. It's running in the background. Does anyone know how to fix this?
Edit; it just show up. But itsn't synching yet.. Let's see.
Edit²: still isn't synching.
|
{Curently quite inactive as I'm really busy in my private life. I will get back soon!} -> Your line here during my inactivity? Feel free to PM <-
|
|
|
Hilux74
Legendary
Offline
Activity: 912
Merit: 1000
|
|
May 05, 2014, 05:00:44 PM |
|
Currently my client won't open. The old one doesn't, and the new one doesn't.
It does open, but it doesn't show up. It's running in the background. Does anyone know how to fix this?
Edit; it just show up. But itsn't synching yet.. Let's see.
Edit²: still isn't synching.
If it is like my client, it takes about 20-30min before it is visible and usable. Not sure why as neither the block chain nor my wallet are that large. Just wait and it will eventually appear on screen and sync.
|
|
|
|
halibit
Legendary
Offline
Activity: 1596
Merit: 1006
|
|
May 05, 2014, 05:06:59 PM |
|
Lol why bother switching to that account to make the announcement. Just stay as Halibut. Are you thinking I'm MCR?
|
|
|
|
Del137
|
|
May 05, 2014, 05:33:46 PM Last edit: May 05, 2014, 05:48:36 PM by Del137 |
|
Donno who MCR but sometimes i wish to give him friendly magic kick to appear and update more often Also i'm sure MRC dont get any success without halibit efforts at all. *UPD tested new wallet - synced fast (like 2 minutes), after i freed CPU from mining MRC
|
|
|
|
randywald
|
|
May 05, 2014, 05:56:13 PM |
|
My wallet stopped syncing at block 159999. I hope it will finish syncing. Can i do something except waiting?
|
|
|
|
Del137
|
|
May 05, 2014, 05:57:36 PM |
|
My wallet stopped syncing at block 159999. I hope it will finish syncing. Can i do something except waiting?
Maybe try previous version (its still actual until block 318000) and after that - run newest one?
|
|
|
|
randywald
|
|
May 05, 2014, 06:07:39 PM |
|
I will try it, or can i just use the old blk0001.dat and blkindex.dat from version 2.1.1.1? At every wallet update i backed up the appdata directory of microcoin and deleted the files except wallet.dat and microcoin.coinf in that directory to resync all blocks...
|
|
|
|
Del137
|
|
May 05, 2014, 06:08:31 PM |
|
I will try it, or can i just use the old blk0001.dat and blkindex.dat from version 2.1.1.1? At every wallet update i backed up the appdata directory of microcoin and deleted the files except wallet.dat and microcoin.coinf in that directory to resync all blocks...
hmm, never deleted any .DAT files during 3 updates, all work fine
|
|
|
|
|