jokerg
Newbie
 Offline
Activity: 28
Merit: 0
|
 |
February 25, 2014, 09:53:07 PM |
|
on sunday morning before the new wallet was released I transformed 205Q2C from cpu-pool and it went in my wallet fine . after I updated to the new wallet a few hours after it says that transaction is unconfirmed 0/6 I figured I would give it a few days and hopefully it would confirm but still has not . this is my transaction id 9c09f36f1b6ec1b6a6666889d6f8a3bb451a6387b474121fa46c931cd078d3bf-000. I tried looking it up but couldn't fined anything . would someone be able to help me figure this out its going to really piss me off if somehow it got lost in the system when that problem was happing
Transaction its stuck, You have to rescan wallet instructions at www.Qubitcoin.net Wiki, after running script let it run for a good half hour to hour and transactions should get caught up. http://qubitcoin.net/wordpress/wiki/qubitcoin-nodes/rescan-qt-walletI have same problem one transaction of cca. 500Q2C has never show in my wallet... Im try -rescan and -reindex parameters in wallet but do not help... I no its very upsetting. I been waiting a good hour now and the transaction is still unconfirmed. I haven't tried -reindex parameters yet but maybe I will give that a try. I have one question tho , if it never confirms will it allways show in my wallet like this or can I get rid of it? |
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
jokerg
Newbie
Offline
Activity: 28
Merit: 0
|
|
February 25, 2014, 10:01:36 PM |
|
I just tried all of them on my i7 3770 and couldn't get any to work  I think right now im running 1.2 corei7-AVX and I get 900 khash/s but Ive read of people getting close to 1000khash/s Just trying to fined the best cpu miner so I can get the most out of this i7 3770 intel 3770k 1000khashs/sec, I confirm, tested it personally. There aren't yet windows binaries of the last optimized version. If the community is still interested at the cpu miner, I could compile it. is that with running the 1.3 corei7-AVX cuz I couldn't get that to work only the cpuminer-v.1.2?. I would be very great full if u could compile the newest one and I think people are very interested . I would send u some Q2c to ur wallet!  |
|
|
|
|
|
coin1234
|
|
February 25, 2014, 10:19:50 PM |
|
Where is kercu? whats up? |
|
|
|
|
elmad
Member
Offline
Activity: 119
Merit: 10
|
|
February 25, 2014, 10:35:43 PM |
|
I just tried all of them on my i7 3770 and couldn't get any to work I think right now im running 1.2 corei7-AVX and I get 900 khash/s but Ive read of people getting close to 1000khash/s Just trying to fined the best cpu miner so I can get the most out of this i7 3770 intel 3770k 1000khashs/sec, I confirm, tested it personally. There aren't yet windows binaries of the last optimized version. If the community is still interested at the cpu miner, I could compile it. is that with running the 1.3 corei7-AVX cuz I couldn't get that to work only the cpuminer-v.1.2?. I would be very great full if u could compile the newest one and I think people are very interested . I would send u some Q2c to ur wallet! If you hashing at 900khs with a i7-3770, I think that you are running my 1.3 first release, not v1.2. Check the version and the author when the miner starts. |
|
|
|
|
jokerg
Newbie
Offline
Activity: 28
Merit: 0
|
|
February 25, 2014, 10:53:51 PM |
|
I just tried all of them on my i7 3770 and couldn't get any to work I think right now im running 1.2 corei7-AVX and I get 900 khash/s but Ive read of people getting close to 1000khash/s Just trying to fined the best cpu miner so I can get the most out of this i7 3770 intel 3770k 1000khashs/sec, I confirm, tested it personally. There aren't yet windows binaries of the last optimized version. If the community is still interested at the cpu miner, I could compile it. is that with running the 1.3 corei7-AVX cuz I couldn't get that to work only the cpuminer-v.1.2?. I would be very great full if u could compile the newest one and I think people are very interested . I would send u some Q2c to ur wallet! If you hashing at 900khs with a i7-3770, I think that you are running my 1.3 first release, not v1.2. Check the version and the author when the miner starts. just checked it says cpu miner v1.2 .. its the one ig0tik3d posted complied one page 129.. my i7 is running stock on 3.7GHz. is your 3770k overclocked? I wish I could get out another 100 khash/s |
|
|
|
|
wgd
Legendary
Offline
Activity: 1815
Merit: 1005
|
|
February 25, 2014, 10:58:46 PM |
|
Krecu here are you? Back to us !! [piwo]
|
|
|
|
|
azhago
|
|
February 26, 2014, 12:28:43 AM |
|
Please vote on the exchange https://www.mintpal.com/voting. Who can help in the promotion, but who can list the BTC at the following address 1DxGAdbhDW1iJxPvHuAFcv7biLTLtCjVge Each 0.00005000 BTC received will count for 1 vote!!!Maybe we can send donations to Krecu on a dedicated Q2C address, and when it reach enough to make a difference, he convert it to BTC and make a big enough donation to Mintpal to make Q2C added to this exchange ? I think if we reach 1BTC, it will be enough (+20000votes) Actually (but the price is going up slowly), 1BTC =~830k Q2C I'm ready to give at least 10k Q2C for that. What do you think about that ? Krecu ? |
|
|
|
elmad
Member
Offline
Activity: 119
Merit: 10
|
|
February 26, 2014, 01:43:26 AM |
|
I just tried all of them on my i7 3770 and couldn't get any to work I think right now im running 1.2 corei7-AVX and I get 900 khash/s but Ive read of people getting close to 1000khash/s Just trying to fined the best cpu miner so I can get the most out of this i7 3770 intel 3770k 1000khashs/sec, I confirm, tested it personally. There aren't yet windows binaries of the last optimized version. If the community is still interested at the cpu miner, I could compile it. is that with running the 1.3 corei7-AVX cuz I couldn't get that to work only the cpuminer-v.1.2?. I would be very great full if u could compile the newest one and I think people are very interested . I would send u some Q2c to ur wallet! If you hashing at 900khs with a i7-3770, I think that you are running my 1.3 first release, not v1.2. Check the version and the author when the miner starts. just checked it says cpu miner v1.2 .. its the one ig0tik3d posted complied one page 129.. my i7 is running stock on 3.7GHz. is your 3770k overclocked? I wish I could get out another 100 khash/s ok right. I confused the numbers. So: v1.1 -> ig0tik3d sse2 optimized version v1.2 -> elmad AES-NI optimized version V1.2b -> elmad AES-NI optimized version. Tomorrow I'll release Windows binaries of this version. |
|
|
|
|
jokerg
Newbie
Offline
Activity: 28
Merit: 0
|
|
February 26, 2014, 03:04:49 AM |
|
I just tried all of them on my i7 3770 and couldn't get any to work I think right now im running 1.2 corei7-AVX and I get 900 khash/s but Ive read of people getting close to 1000khash/s Just trying to fined the best cpu miner so I can get the most out of this i7 3770 intel 3770k 1000khashs/sec, I confirm, tested it personally. There aren't yet windows binaries of the last optimized version. If the community is still interested at the cpu miner, I could compile it. is that with running the 1.3 corei7-AVX cuz I couldn't get that to work only the cpuminer-v.1.2?. I would be very great full if u could compile the newest one and I think people are very interested . I would send u some Q2c to ur wallet! If you hashing at 900khs with a i7-3770, I think that you are running my 1.3 first release, not v1.2. Check the version and the author when the miner starts. just checked it says cpu miner v1.2 .. its the one ig0tik3d posted complied one page 129.. my i7 is running stock on 3.7GHz. is your 3770k overclocked? I wish I could get out another 100 khash/s ok right. I confused the numbers. So: v1.1 -> ig0tik3d sse2 optimized version v1.2 -> elmad AES-NI optimized version V1.2b -> elmad AES-NI optimized version. Tomorrow I'll release Windows binaries of this version. Thankyou! |
|
|
|
|
|
coin1234
|
|
February 26, 2014, 05:35:07 AM |
|
Krecu here are you? Back to us !! [piwo]
WE MINE Q2C
WE LOVE Q2C
WE LOVE kercu
|
|
|
|
|
|
coin1234
|
|
February 26, 2014, 05:48:49 AM |
|
again with my cpus  |
|
|
|
|
_Dejan_
Member
Offline
Activity: 68
Merit: 10
|
|
February 26, 2014, 06:25:12 AM |
|
on sunday morning before the new wallet was released I transformed 205Q2C from cpu-pool and it went in my wallet fine . after I updated to the new wallet a few hours after it says that transaction is unconfirmed 0/6 I figured I would give it a few days and hopefully it would confirm but still has not . this is my transaction id 9c09f36f1b6ec1b6a6666889d6f8a3bb451a6387b474121fa46c931cd078d3bf-000. I tried looking it up but couldn't fined anything . would someone be able to help me figure this out its going to really piss me off if somehow it got lost in the system when that problem was happing
Transaction its stuck, You have to rescan wallet instructions at www.Qubitcoin.net Wiki, after running script let it run for a good half hour to hour and transactions should get caught up. http://qubitcoin.net/wordpress/wiki/qubitcoin-nodes/rescan-qt-walletI have same problem one transaction of cca. 500Q2C has never show in my wallet... Im try -rescan and -reindex parameters in wallet but do not help... I no its very upsetting. I been waiting a good hour now and the transaction is still unconfirmed. I haven't tried -reindex parameters yet but maybe I will give that a try. I have one question tho , if it never confirms will it allways show in my wallet like this or can I get rid of it? When Im ask cpu-pool.net support about my transaction problem Im receive next reply: I think this transactions is going with problem with network. and may be it lost.
we have around 700 blocks with problem transactions.
it's not problem of pool its problem of network, and i think we can't solve it ...
So as I understand there is problem/bug in network and some transactions are lost... |
Q2C: GfFqmNJmoXi4TGvXugRGrHL9yiN4NBwhvX
|
|
|
|
glongsword
|
|
February 26, 2014, 06:27:32 AM |
|
So as I understand there is problem/bug in network and some transactions are lost...
Did they provide you with a txid? Did you check on http://q2c-browser.tk/ to make sure they sent the payment to the correct address, and it got confirmed? |
|
|
|
|
_Dejan_
Member
Offline
Activity: 68
Merit: 10
|
|
February 26, 2014, 07:13:41 AM |
|
So as I understand there is problem/bug in network and some transactions are lost...
Did they provide you with a txid? Did you check on http://q2c-[Suspicious link removed]/ to make sure they sent the payment to the correct address, and it got confirmed? They don't need provide me transaction Id because I can see it "control panel"... Im check transaction in http://q2c-[Suspicious link removed]/ and all loks like OK. Im try check transaction on http://qubitchain.info/ few days ago but can't find it. Page return me in error: No information available about transaction(Error Code: -5) |
Q2C: GfFqmNJmoXi4TGvXugRGrHL9yiN4NBwhvX
|
|
|
|
MarcusDe
|
|
February 26, 2014, 08:00:23 AM |
|
@azhago:
Hey man, can you tell us what hardware and software are you using on cpu-pool?
You are taking more than 90% of all coins from pool whole day.
|
|
|
|
_Dejan_
Member
Offline
Activity: 68
Merit: 10
|
|
February 26, 2014, 08:44:21 AM |
|
Can someone help me why when I start GPU miner receive next error: [09:33:34] Started sgminer 4.1.0
[09:33:34] WARNING: GPU_MAX_ALLOC_PERCENT is not specified!
[09:33:34] WARNING: GPU_USE_SYNC_OBJECTS is not specified!
[09:33:34] Kernel qubitcoin is experimental.
[09:33:35] Error -11: Building Program (clBuildProgram)
[09:33:35] ./kernel/luffa.cl(41): warning: type qualifier specified more than
once
__constant static const sph_u32 V_INIT[5][8] = {
^
./kernel/luffa.cl(41): error: storage-class specifiers extern/static/register
not allowed for varia
[09:33:35] Failed to init GPU thread 0, disabling device 0
[09:33:35] Restarting the GPU from the menu will not fix this.
[09:33:35] Try restarting sgminer.
Press enter to continue:
|
Q2C: GfFqmNJmoXi4TGvXugRGrHL9yiN4NBwhvX
|
|
|
|
MarcusDe
|
|
February 26, 2014, 08:47:01 AM |
|
Can someone help me why when I start GPU miner receive next error: [09:33:34] Started sgminer 4.1.0
[09:33:34] WARNING: GPU_MAX_ALLOC_PERCENT is not specified!
[09:33:34] WARNING: GPU_USE_SYNC_OBJECTS is not specified!
[09:33:34] Kernel qubitcoin is experimental.
[09:33:35] Error -11: Building Program (clBuildProgram)
[09:33:35] ./kernel/luffa.cl(41): warning: type qualifier specified more than
once
__constant static const sph_u32 V_INIT[5][8] = {
^
./kernel/luffa.cl(41): error: storage-class specifiers extern/static/register
not allowed for varia
[09:33:35] Failed to init GPU thread 0, disabling device 0
[09:33:35] Restarting the GPU from the menu will not fix this.
[09:33:35] Try restarting sgminer.
Press enter to continue:
If you are mining on Windows, copy all files from kernel dir where your .exe file is located. |
|
|
|
|
azhago
|
|
February 26, 2014, 08:47:18 AM |
|
@MarcusDe
Multiple GPU Rigs, but workers are banned a lot of time.
P2pool doesn't have this problem.
|
|
|
|
|
MarcusDe
|
|
February 26, 2014, 09:12:15 AM |
|
@MarcusDe
Multiple GPU Rigs, but workers are banned a lot of time.
P2pool doesn't have this problem.
Haha, you have the power :-D I switched to solo, since I found 2 blocks in half of hour for pool (so mostly for your wallet), and have 0.8 coin for my work :-D |
|
|
|
_Dejan_
Member
Offline
Activity: 68
Merit: 10
|
|
February 26, 2014, 09:14:29 AM |
|
If you are mining on Windows, copy all files from kernel dir where your .exe file is located.
Yes mining on windows. Im try but is same: [10:09:03] Started sgminer 4.1.0
[10:09:04] WARNING: GPU_MAX_ALLOC_PERCENT is not specified!
[10:09:04] WARNING: GPU_USE_SYNC_OBJECTS is not specified!
[10:09:04] Kernel qubitcoin is experimental.
[10:09:05] Error -11: Building Program (clBuildProgram)
[10:09:05] ./luffa.cl(41): warning: type qualifier specified more than once
__constant static const sph_u32 V_INIT[5][8] = {
^
./luffa.cl(41): error: storage-class specifiers extern/static/register not
allowed for variables
__const
[10:09:05] Failed to init GPU thread 0, disabling device 0
[10:09:05] Restarting the GPU from the menu will not fix this.
[10:09:05] Try restarting sgminer.
Press enter to continue:
|
Q2C: GfFqmNJmoXi4TGvXugRGrHL9yiN4NBwhvX
|
|
|
|
