lyolyalya
|
|
June 24, 2018, 04:42:53 PM |
|
First of all, thank you for your reply.
As I have already written in the past message, I am already trying to mine with "lyra2v2-old" parameter and it mines slower
when you say "you could disable it", do you mean to add this "--no-watchdog" ?
if i am not wrong, with ccminer you can add the parameter "-f, --diff-factor Divide difficulty by this factor (default 1.0)" or with enemyminer you can add " in Z-enemy miner, inside the readme.txt there is written "6) Yiimp pools rec manual diff, like : ( -p d=16 ) - for small farms or (-p d=48 )- for good farms like 6-8 1080ti"
1. lyra2v2-old is a more stable implementation 2. Yep, you could disable it by adding --no-watchdog to command line CryptoDredge -a neoscrypt -o neoscrypt.mine.zergpool.com:4233 -u YOURWALLET -p c=GBX --no-watchdog 3. And thank you for the information about difficulty option, We'll think about this. 3.i thought that you already done this.cause i'm using it like ccminer and cryptodredge take static diff from my -p option well. i think that not miner option=)seems like pool taking it from -p field via json reader or something=)so d=xxx is working. i'm not talking about divider - not using it at all.
|
|
|
|
Freew0rld
Newbie
Offline
Activity: 9
Merit: 0
|
|
June 24, 2018, 05:17:10 PM |
|
GREAT JOB!
My results for lyra2z:
1060: PL 60 / Core Clock +150. It use 71watt for 1302kh/s
1070: PL 55 / Core Clocke +150. It use 115w for 2132kh/s
Could you write what intencity use? Here the result is around 40% less with PL 85%
|
|
|
|
lyolyalya
|
|
June 24, 2018, 06:19:27 PM |
|
still needed miner exit option on stratum fail.i'm using miner control and after few hours there is 2 instances of the miner.
|
|
|
|
sereupin
Newbie
Offline
Activity: 63
Merit: 0
|
|
June 25, 2018, 12:25:54 AM |
|
you are right mate! I tried to add this "-p c=HANA,d=206" and now the difficult is fixed as i wanted since the beginning of session... I have noticed that my first 4 gpu run very fast... other 4 gpu have lower hashrate.. and i don't know how to fix it... do you have this problem also? any idea how to fix ? ps: the normal algo give more voltage than the "old".. now i am sure of this
|
|
|
|
oberrz
Newbie
Offline
Activity: 20
Merit: 0
|
|
June 25, 2018, 09:54:19 AM |
|
The problem with mining dev's fee is still there https://ibb.co/c9GDn8
|
|
|
|
bragmining
Newbie
Offline
Activity: 15
Merit: 0
|
|
June 25, 2018, 10:32:41 AM |
|
Any Lyra2z hashrate benchmarks for 1080Ti?
|
|
|
|
dafuzz_rsa
Newbie
Offline
Activity: 40
Merit: 0
|
|
June 25, 2018, 12:38:15 PM |
|
ETA For linux version?
|
|
|
|
sereupin
Newbie
Offline
Activity: 63
Merit: 0
|
|
June 25, 2018, 02:11:14 PM |
|
it continue to crash after few minutes or half hour of mining.. and to restart it I can only reboot the RIG. It isn't very nice to use this miner in this conditions, totally unstable.
Then, while it works, 4 gpu works slower, sometime the last one stop to work.
If not fixed, i am going to switch to another miner because I can't check my rig every 10 minutes crossfingering that everything is working fine.. totally waste of time and energy
|
|
|
|
lyolyalya
|
|
June 25, 2018, 03:49:26 PM |
|
it continue to crash after few minutes or half hour of mining.. and to restart it I can only reboot the RIG. It isn't very nice to use this miner in this conditions, totally unstable.
Then, while it works, 4 gpu works slower, sometime the last one stop to work.
If not fixed, i am going to switch to another miner because I can't check my rig every 10 minutes crossfingering that everything is working fine.. totally waste of time and energy
something like that here.miner not always closes properly with 3rd party software and i have 2 instances running lyra2z and neoscrypt for example.1-2 hours and rebooting...if there is no -r or -eexit options like ccminer or ewbf in future - then such a good speeds are worthless...
|
|
|
|
sereupin
Newbie
Offline
Activity: 63
Merit: 0
|
|
June 25, 2018, 08:45:49 PM |
|
something like that here.miner not always closes properly with 3rd party software and i have 2 instances running lyra2z and neoscrypt for example.1-2 hours and rebooting...if there is no -r or -eexit options like ccminer or ewbf in future - then such a good speeds are worthless...
yes, It mines fast but if every tot minutes or hour it crash my rig and i need to reboot, what I have earned I lose with this problems... I stop to use it till will be a stable version
|
|
|
|
cryptodredge (OP)
|
|
June 26, 2018, 05:23:58 AM |
|
it continue to crash after few minutes or half hour of mining.. and to restart it I can only reboot the RIG. It isn't very nice to use this miner in this conditions, totally unstable.
Then, while it works, 4 gpu works slower, sometime the last one stop to work.
If not fixed, i am going to switch to another miner because I can't check my rig every 10 minutes crossfingering that everything is working fine.. totally waste of time and energy
something like that here.miner not always closes properly with 3rd party software and i have 2 instances running lyra2z and neoscrypt for example.1-2 hours and rebooting...if there is no -r or -eexit options like ccminer or ewbf in future - then such a good speeds are worthless... What's pool are you using?
|
CryptoDredge: NVIDIA GPU Miner
|
|
|
cryptodredge (OP)
|
|
June 26, 2018, 06:14:22 AM |
|
REMINDERBug writing guidelines:- Driver version
- GPUs (specific models)
- Overclocking parameters (core, mem, voltage)
- Watchdog, monitoring app
- Screenshot or log
- Pool
- Algo
- OS
|
CryptoDredge: NVIDIA GPU Miner
|
|
|
lyolyalya
|
|
June 26, 2018, 03:54:48 PM |
|
REMINDERBug writing guidelines:- Driver version
- GPUs (specific models)
- Overclocking parameters (core, mem, voltage)
- Watchdog, monitoring app
- Screenshot or log
- Pool
- Algo
- OS
mkay... 1)one rig with 1x1080ti+1x1080+1x1070ti+5x1070 2)160|+500(100% stable with other miners) 3)no 4)can't reproduce it 5)any pool 6)lyra2v2,lyra2z,neoscrypt 7)win 10x64 with latest packs Miner control need to close one miner and open another miner when profitability of one algo is higher than another.with ccminer i can gat more than 5 days of working.with cryptodredge - no more than 8 hours.i just see two miners run at a time and after few hours - crash.tried no OC - same result.need just a proper exit if miner can't start mining for somehow.
|
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
June 26, 2018, 05:15:13 PM |
|
Someone already tested these algorithms with a GTX 1080 Ti? EVGA 1080ti SC, 76%PL, +90core, +125mem lyra2z is giving 3.62MH Lyra2r2 gives 73.7MH (minimal improvement from ~72.9MH in version 0.4.0)
|
|
|
|
CryptoSperm
Newbie
Offline
Activity: 79
Merit: 0
|
|
June 27, 2018, 07:32:16 AM |
|
Can I solo mine with Cryptodredge?
|
|
|
|
xixou
Member
Offline
Activity: 153
Merit: 11
|
|
June 27, 2018, 07:45:23 PM |
|
[21:43:43] INFO - Selected pool: btx.suprnova.cc:3629 [21:43:43] INFO - Selected algo: bitcore [21:43:43] ERROR - Algorithm bitcore is unknown
|
|
|
|
ad1000rso
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 28, 2018, 01:30:32 AM |
|
My miner have12% reject in pool, it´s regular?
|
|
|
|
manzey
Newbie
Offline
Activity: 16
Merit: 0
|
|
June 28, 2018, 01:42:12 AM |
|
this is great...i had no idea about which gpu to buy... Now I know... Diving right into it now.. I just love mining
|
|
|
|
cryptodredge (OP)
|
|
June 28, 2018, 08:17:55 AM |
|
My miner have12% reject in pool, it´s regular?
No, it isn't. Most probably you face bad-overclock or some kind of network problem.
|
CryptoDredge: NVIDIA GPU Miner
|
|
|
|