CryptoDredge 0.8.0 — NVIDIA GPU Miner [obsolete]

[ggillies]

So far, so good!  I am getting around 13-15% better performance using CryptoDredge than CCminer, etc.  I am running two rigs with 8 X Nvidia 1080ti cards.  80% power, +150 mem clock, +65 GPU clock and getting a cumulative 615.33 MH/s on Lyra2rev2, so almost exactly 77MH/s per card on Lyra2rev2.

On Lyra2z, I am getting 29MH/s, or 3.625 per card.

On Neoscrypt I am getting 13.74 MH/s, or 1.71 MH/s per card (some cards as high as 1.77 MH/s).

I get about 2 restarts per 24 hours with CryptoDredge and get zero restarts for weeks sometimes with ccminer, so it needs to be a bit more stable.

I am running the latest version of Awesomeminer, which is how I found out about CryptoDredge, because the latest update included Cryptodredge.

Cheers, and thanks for this new tool that is allowing me to make more profits!

[Nalut]

So far, so good!  I am getting around 13-15% better performance using CryptoDredge than CCminer, etc.  I am running two rigs with 8 X Nvidia 1080ti cards.  80% power, +150 mem clock, +65 GPU clock and getting a cumulative 615.33 MH/s on Lyra2rev2, so almost exactly 77MH/s per card on Lyra2rev2.

On Lyra2z, I am getting 29MH/s, or 3.625 per card.

On Neoscrypt I am getting 13.74 MH/s, or 1.71 MH/s per card (some cards as high as 1.77 MH/s).

I get about 2 restarts per 24 hours with CryptoDredge and get zero restarts for weeks sometimes with ccminer, so it needs to be a bit more stable.

I am running the latest version of Awesomeminer, which is how I found out about CryptoDredge, because the latest update included Cryptodredge.

Cheers, and thanks for this new tool that is allowing me to make more profits!

How did you add CD miner to Awesomeminer ? Or is it already added in AM's latest version?
Tried to use Awesomeminer before but the autoswitching algo config confused me so i left it

[ggillies]

The latest version of Awesomeminer added CryptoDredge (i.e it came with the latest update) as one of the mining software packages available to me.  I benchmarked my cards again and CryptoDredge had by far the best performance for me on Lyra2rev2, Lyra2z and Neoscrypt.

[zadornikigor]

How to enable logs. I stupidly crashes at startup

[Zepp74]

CryptoDredge is faster for phi2  but crashes for me alot. I had to stop using it. I get hard crashes that lock the rig up and needs a reboot. Had to go back to z-enemy which runs fine no crashes. I tried everything with CryptoDredge. I changed intensity, i removed overclocking, the last try i had no overclocking and intensity 4. It worked for about 4hrs and then hard crash cuda error unspecified launch failure.

[KL1000]

So far, so good!  I am getting around 13-15% better performance using CryptoDredge than CCminer, etc.  I am running two rigs with 8 X Nvidia 1080ti cards.  80% power, +150 mem clock, +65 GPU clock and getting a cumulative 615.33 MH/s on Lyra2rev2, so almost exactly 77MH/s per card on Lyra2rev2.

On Lyra2z, I am getting 29MH/s, or 3.625 per card.

On Neoscrypt I am getting 13.74 MH/s, or 1.71 MH/s per card (some cards as high as 1.77 MH/s).

I get about 2 restarts per 24 hours with CryptoDredge and get zero restarts for weeks sometimes with ccminer, so it needs to be a bit more stable.

I am running the latest version of Awesomeminer, which is how I found out about CryptoDredge, because the latest update included Cryptodredge.

Cheers, and thanks for this new tool that is allowing me to make more profits!

CryptoDredge is faster for phi2  but crashes for me alot. I had to stop using it. I get hard crashes that lock the rig up and needs a reboot. Had to go back to z-enemy which runs fine no crashes. I tried everything with CryptoDredge. I changed intensity, i removed overclocking, the last try i had no overclocking and intensity 4. It worked for about 4hrs and then hard crash cuda error unspecified launch failure.

Reduce the power to 55%   mem -500

[Zepp74]

Ok, i did have it at 60% power and -400 memory

[dafuzz_rsa]

Any chance you can give us an indication on how long it could take for you to release your Linux version?

[ibinsad]

Any more improvements for phi2 algo?

I get 6,3MH with 1080ti at tdp 50

Spmod 4 is getting 7,4MH

[oberrz]

We're waiting for a dev's bug fix

[jugger1028]

Any more improvements for phi2 algo?

I get 6,3MH with 1080ti at tdp 50

Spmod 4 is getting 7,4MH

Did you see that number for yourself?

[ggillies]

Update!


After testing on Skein, I am getting around 870MH/s per card, running my Nvidia 1080tis, for a total of 6.9GH/s for 8 cards.

[sidog]

Any more improvements for phi2 algo?

I get 6,3MH with 1080ti at tdp 50

Spmod 4 is getting 7,4MH

talk about misinformation.   

7.4mh on spmod at what TDP?  CD can do 7.4mh at > 70 TDP no?  Please compare apples to apples.

[oberrz]

WHEN ?!!! https://ibb.co/iZDysT

[ibinsad]

Any more improvements for phi2 algo?

I get 6,3MH with 1080ti at tdp 50

Spmod 4 is getting 7,4MH

talk about misinformation.   

7.4mh on spmod at what TDP?  CD can do 7.4mh at > 70 TDP no?  Please compare apples to apples.

TDP 50

[ironkid]

TDP can vary alot specially since its mostly capped by temperature limit.  For example if your gpu is cool enough even at power limit 50% your GPU might be working @ 100% gpu clock and voltage so you get hashrate like 100% power limit.

SP mod miner is almost the same like Enemy's or Cryptodredge if you compare them by gpu clock/voltage.

[ibinsad]

TDP can vary alot specially since its mostly capped by temperature limit.  For example if your gpu is cool enough even at power limit 50% your GPU might be working @ 100% gpu clock and voltage so you get hashrate like 100% power limit.

SP mod miner is almost the same like Enemy's or Cryptodredge if you compare them by gpu clock/voltage.

With sp you get 20% more hash

[tbearhere]

Could you add benchmarking plz?  Thx 

[ayiphelmy]

please add option for setup clock, memory and power like -ccdv, mdcv, pow

Thanks

[UselessGuru]

1. Could you check an another port or the firewall settings.
2. We'll try to resolve issue with "-b localhost:4444"

1. Firewall settings is default.
 Connection established. Command sended normally. Readed answer as `null`. No exceptions.

powershell code work with any ccminer:

Code:

$Client =[Net.Sockets.TcpClient]::new("127.0.0.1", "4444")
$Stream = $Client.GetStream()
$Writer = [IO.StreamWriter]::new($Stream)
$Reader = [IO.StreamReader]::new($Stream)

$Writer.WriteLine("summary")
$Writer.Flush()
$result = $Reader.ReadLine() # $Reader.ReadToEnd() same $null
Write-Host "Answer: $result"

2. Thanks.

Please, try $Writer.Write("summary"), because WriteLine sending "summary\r\n". We'll fix it

> Please, try $Writer.Write("summary"), because WriteLine sending "summary\r\n". We'll fix it

When???