[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[sakr]

6 hours mining at 2300KH/s and 0 accepted / 0 rejects
time to move on

Hi.

We have shares being accepted and recorded. Try our pool out!

ok, just pointed the rig, i will report results, hopefully successful!

[1714907344]

1714907344

[1714907344]

1714907344

[laterbreh]

UTC.POOL.PM
first pool open since launch (not considering the chinese one ;-))
2% VARDIFF - SSL - Anti-DDoS - Gigabit - multiple servers.
No e-mail confirmations

I believe your pool was invitation only to start. Technically not first "open" pool.

[cebb]

So can anyone explain why hash rates are so low?  I always get much better hash rates with Scrypt-jane. 

Bumface is charging .5 BTC for his own closed source super-fast miner, seems a little shady but hey, his coin his rules, nothing you can do.  PM him for details.

LOL.  Ultimate ultra scam coin.

Pay for premine.
Pay for pool access.
Pay for fast miner.

Nomen est omen!
These trollbox mods have no class.

If it barks like a dog  it IS a dog

These troll box mods (esp. koolio) are really the worst scum on earth you could ever imagine. They will ban you for thousands of minutes for mentioning dogecoin (no premine, high network hashrate than litecoin) on BTC-e but are happy launching their pre-mined shitcoin and scamming miners of their hashing.

[bitwho]

So can anyone explain why hash rates are so low?  I always get much better hash rates with Scrypt-jane. 

Bumface is charging .5 BTC for his own closed source super-fast miner, seems a little shady but hey, his coin his rules, nothing you can do.  PM him for details.

LOL.  Ultimate ultra scam coin.

Pay for premine.
Pay for pool access.
Pay for fast miner.

Nomen est omen!
These trollbox mods have no class.

If it barks like a dog  it IS a dog

could some one leak the miner. pleasee!!

[laterbreh]

So can anyone explain why hash rates are so low?  I always get much better hash rates with Scrypt-jane. 

Bumface is charging .5 BTC for his own closed source super-fast miner, seems a little shady but hey, his coin his rules, nothing you can do.  PM him for details.

LOL.  Ultimate ultra scam coin.

Pay for premine.
Pay for pool access.
Pay for fast miner.

Nomen est omen!
These trollbox mods have no class.

If it barks like a dog  it IS a dog

could some one leak the miner. pleasee!!

Our pool has a link to the miner.. http://ultra.leetpools.com/index.php?page=gettingstarted

Its also available on the first post...

[marcthespot]

New Pool located in the US - http://ultra.coinsnipers.com

[Kiwicon]

--scrypt-jane does indeed need more RAM.

Really? My old munter miner pc is running a 5970 @ 480Kh/s on a celeron with only 1.08GB of DDR2 ram being used. Funny dat

[bitwho]

So can anyone explain why hash rates are so low?  I always get much better hash rates with Scrypt-jane. 

Bumface is charging .5 BTC for his own closed source super-fast miner, seems a little shady but hey, his coin his rules, nothing you can do.  PM him for details.

LOL.  Ultimate ultra scam coin.

Pay for premine.
Pay for pool access.
Pay for fast miner.

Nomen est omen!
These trollbox mods have no class.

If it barks like a dog  it IS a dog

could some one leak the miner. pleasee!!

Our pool has a link to the miner.. http://ultra.leetpools.com/index.php?page=gettingstarted

Its also available on the first post...

there seems to be a "super faster" one

[stuhlman]

ultra.nitro.org Pool is open

Ultracoin Pool @ ultra.nitro.org is working and open for signups.
come joins us now, blocks are coming in.

[FoBoT]

ultra.nitro.org Pool is open

Ultracoin Pool @ ultra.nitro.org is working and open for signups.
come joins us now, blocks are coming in.

this pool is working for me, looks stable, i haven't taken a payout yet

[n3vs]

ultra.nitro.org Pool is open

Ultracoin Pool @ ultra.nitro.org is working and open for signups.
come joins us now, blocks are coming in.

this pool is working for me, looks stable, i haven't taken a payout yet

Just got a payout of 9UTC

[DrG]

New users be careful.  My one post attracted the attention of a probable scammer named chenjsi who wanted me to send me BTC first for some UTC.  He sent me an unsolicited PM.  Yeah right, send my BTC to some 3 week noob with no history.... where's Tomatocage  

[Kiwicon]

I just found the original promo site for Ultra coin. The first review is spot on!

http://www.magicshop.co.uk/p548/Ultra_Coin_%2850p_version%29/product_info.html

UltraCon... "The most Versatile gimmick coin on the market" 

[laterbreh]

http://ULTRA.Leetpools.NET

http://ultra.leetpools.com (WILL WORK SHORTLY IT IS PROPAGATING)

(We had to move the .com currently propogating, please access the site using the .net!!!)

We are sorry for the inconvenience, all pool functions and stratum are functioning, please update!!!

IS OPEN AND HUNGRY FOR HASHES!!

1% PROP VARDIFF!!!

Fully functional. No email confirmations required! Just register and start hashing!!!

Come chill in IRC #Leetpools on quakenet

@ 90MHS 100mhs 120Mhs 140mhs 150mhs AND GROWING!!


1.337 UTC BLOCK FINDER REWARDS ENABLED FOR NEXT 300++ BLOCKS!!! COME HASH!

Promo is over! Thanks everyone!

Mine like a Boss.

CHECK OUT OUR FRESH NEW LOOK! :DDDD

[chunkyjunkie]

Well, wish I could figure out what is wrong with my solo mining.  I joined the nitro pool and found my first block pretty fast. Running about 1000 kh/s didn't find one all day.... Saw the blocks being found, the changing difficulty etc all in cgminer just never found a block with my setup parameters so I am guessing I was doing something wrong.

Also I normally would have about 1800 kh/s but assume using the ultracoin miner that is going to be lower no matter what settings I have for the cards themselves.

When I was attempting to solo mine my bat files would be similar to this ( changed them many times )

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer.exe --scrypt-jane -o 127.0.0.1:44101 -u xxxxxxx -p xxxxxxxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --intensity 15 --gpu-powertune 20 --worksize 256 --expiry 1 --queue 0 --scan-time 1

And my Ultracoin.conf file ( that I put in the Ultracoin folder in the appdata area ) was this

rpcuser=xxxxxxx
rpcpassword=xxxxxxxx
rpcport=44101
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1

I was starting the Ultracoin wallet .... then would go to the debug and do that command setgenerate true, then starting my bat file.

( I just xxxxxxx'd out the info but yes the user/pass was correct )

I am so new to solo mining so am sure I could tweak it a lot... the above bat was for a 7990 card single...  Wasn't too worried about getting it as  efficient as possible as I was to just getting it to work and accept one block to know I had it setup right.   So hard to tell if you are actually mining in cgminer... was getting best share etc.. so figured it was working on some level...

If anyone can point out where I went wrong would be appreciated.  ( Would love to know for going forward on other solo mining coins as well,  I did find like 5 swag blocks after changing my conf files, bat files etc.. so at one point I almost knew what I was doing on swag coin the other day. )

Thanks in advance...

edit *** we didn't need to start the qt wallet with the -server command like other coins did we? ****

[laterbreh]

Well, wish I could figure out what is wrong with my solo mining.  I joined the nitro pool and found my first block pretty fast. Running about 1000 kh/s didn't find one all day.... Saw the blocks being found, the changing difficulty etc all in cgminer just never found a block with my setup parameters so I am guessing I was doing something wrong.

Also I normally would have about 1800 kh/s but assume using the ultracoin miner that is going to be lower no matter what settings I have for the cards themselves.

When I was attempting to solo mine my bat files would be similar to this ( changed them many times )

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
ultracoinminer.exe --scrypt-jane -o 127.0.0.1:44101 -u xxxxxxx -p xxxxxxxx --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --intensity 15 --gpu-powertune 20 --worksize 256 --expiry 1 --queue 0 --scan-time 1

And my Ultracoin.conf file ( that I put in the Ultracoin folder in the appdata area ) was this

rpcuser=xxxxxxx
rpcpassword=xxxxxxxx
rpcport=44101
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1

I was starting the Ultracoin wallet .... then would go to the debug and do that command setgenerate true, then starting my bat file.

( I just xxxxxxx'd out the info but yes the user/pass was correct )

I am so new to solo mining so am sure I could tweak it a lot... the above bat was for a 7990 card single...  Wasn't too worried about getting it as  efficient as possible as I was to just getting it to work and accept one block to know I had it setup right.   So hard to tell if you are actually mining in cgminer... was getting best share etc.. so figured it was working on some level...

If anyone can point out where I went wrong would be appreciated.  ( Would love to know for going forward on other solo mining coins as well,  I did find like 5 swag blocks after changing my conf files, bat files etc.. so at one point I almost knew what I was doing on swag coin the other day. )

Thanks in advance...

Hi chunky. Your settings look fine, I believe it was bad luck to be honest. Try out some of the other pools available and see your luck. Our pool is finding blocks quickly with our current hash rate. Check our block percentages. http://ultra.leetpools.com

[chunkyjunkie]

Hi chunky. Your settings look fine, I believe it was bad luck to be honest. Try out some of the other pools available and see your luck. Our pool is finding blocks quickly with our current hash rate. Check our block percentages. http://ultra.leetpools.com


[/quote]

Ok thanks appreciate the input... Will definitely check out your pool as I like to have at least 2 when i pool mine..

[laterbreh]

Hi chunky. Your settings look fine, I believe it was bad luck to be honest. Try out some of the other pools available and see your luck. Our pool is finding blocks quickly with our current hash rate. Check our block percentages. http://ultra.leetpools.com

Ok thanks appreciate the input... Will definitely check out your pool as I like to have at least 2 when i pool mine..
[/quote]

Feel free to ask questions through our support page or our threads. We are always around.

Thank you!

[phreakk]

I just found the original promo site for Ultra coin. The first review is spot on!

http://www.magicshop.co.uk/p548/Ultra_Coin_%2850p_version%29/product_info.html

UltraCon... "The most Versatile gimmick coin on the market" 

ROFL

[jayguar]

New users be careful.  My one post attracted the attention of a probable scammer named chenjsi who wanted me to send me BTC first for some UTC.  He sent me an unsolicited PM.  Yeah right, send my BTC to some 3 week noob with no history.... where's Tomatocage  

I too received the PM. Here is the message.

buy utc 10k=1btc
send btc first
thx   Grin

Send BTC first?