[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[worldlybedouin]

142kh/s on a 3MH rig with WU: 0 and mad HW errors. fail

DOn't forget to add on the extra params for your card to the end of the batch file command:  

ultracoinminer -o 192.168.1.1:11111 -u myuser -p mypass --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 21712 -I 19 -g 1 -w 256 --lookup-gap 2 --gpu-engine 1060 --gpu-memclock 1250

The above is my settings for MSI 7950 OC/Ed.

[Last1212]

please anybody can post the actual conf file and the bat file, i cannot solo mine with gpu. It says no pooll suitable on 127.0.0.1 and the port is set fine on the conf and bat files!
please helppp!!!

It is ok. Just mine.

[GigaCoin]

guys relax, issues happen at launch.

The wallet opens and syncs perfect for me, but i'm unable to solo CPU mine. doesn't work

[KickAzzDude]

please anybody can post the actual conf file and the bat file, i cannot solo mine with gpu. It says no pooll suitable on 127.0.0.1 and the port is set fine on the conf and bat files!
please helppp!!!

.bat file

ultracoinminer.exe -o 127.0.0.1:44101 -u user -p pw --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 18 -w 512 -g 1 --thread-concurrency 24550 --gpu-threads 1 --gpu-powertune 20

that's what I have for my r9 290s

[nrg_wolf]

the wallet on one of my miners wont even show my hash rate


{
"blocks" : 239,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 1.45824525,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"pooledtx" : 0,
"testnet" : false
}
 there is something really wrong with this shit!

[watchmano]

pool 0 slow down or credentials invalid... how do i make this work?

ultracoin.conf on wallet dir:

rpcuser=user
rpcpassword=pass
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
setgenerate=1

wallet open and starting the ultracoinminer with:

ultracoinminer -o 127.0.0.1:44101 -u user -p pass --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600

what is wrong with this??

[jayguar]

can someone help me? Been trying to solo mine this whole time
All I keep getting is "Pool 0 slow/down or URL or credentials invalid"

conf file:
rpcuser=user
rpcpassword=pass
rpcport=44101
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1

mining bat file:
ultracoinminer -o 127.0.0.1:44101 -u youruser -p yourpassword --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600

I fuckin give up

Same here, please someone help me

Is the wallet open?

Yes, open

change it to http://127.0.0.1:44101
It will work.

[FoBoT]

It takes a little bit more technical savvy, but technically, everything works.  I'm still not loving the percent of orphans I'm getting, but everything is working if you get your stuff setup right.  

solo ? how do you tell if it's an orphan when you solo?

[blacklig]

pool 0 slow down or credentials invalid... how do i make this work?

ultracoin.conf on wallet dir:

rpcuser=user
rpcpassword=pass
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
setgenerate=1

wallet open and starting the ultracoinminer with:

ultracoinminer -o 127.0.0.1:44101 -u user -p pass --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600

what is wrong with this??

dont put there setgenerate=1

rest looks ok

[Last1212]

I wouldnt blame devs of instamine because they premined whatever they wanted
but this launch is really rubish..

I think this thread will be moderated by devs. Maybe we should start new one?

[Stinky_Pete]

I wouldnt blame devs of instamine because they premined whatever they wanted
but this launch is really rubish..

I've known worse

[ning_chang]

so i've downloaded the wallet, opened the console, typed "setgenerate true" my machine is whiring. do i need to do anything else? how do i tell if i've hit a block? the console doesn't show anything other than the command i've just put in.

ta

that is bad idea to do..
you must mine with modified cgminer..
links in first page..
point your miner to 127.0.0.1 and have config file set properly.. also noted at first page..

I have
rpcuser=user
rpcpassword=pass
rpcport=44101
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1

And I cant solo...

and did you start your wallet with this config? also you have to have -u user and -p pass in your config.. as well as -o 127.0.0.1:44101

Downloaded the miner from the first post, can't find the config file. there's no ultracoin.conf in there?

[Cloudpost]

I have 0 accepted and 0 rejected for like 2 mins with 2 good rigs in solo, is it ok?

[Xamda]

I wouldnt blame devs of instamine because they premined whatever they wanted
but this launch is really rubish..

I've known worse

From an equally hyped coin? I don't think so...

[blacklig]

This miner works like a charm!

https://mega.co.nz/#!TZRXGZRA!7x-VlLzM1JddNc4eeS4VZ8ck2igwq5lMnGvx5zDbrLg

And you can use 2-4 GPUs with one wallet, found 7 blocks so far  (someone here said it doesn't work  )

why do I have so few Accepted shares in my miners? Only 0-3 per card... is that normal??? and only 1 block found so far (

[rhui]

I am sitting in front of the computer and waiting for the pool to launch for hours. And it is 3:43 a.m. right here in my time zone. I was very excited about the pool but i am very tired right now. I am not blaming but just want you to know how I support this coin and my patience on it, although i am such a small miner.

UeiBB41HDRPanVKtsefFSEYvAW9ajTHULz

Good night

[Last1212]

I have 0 accepted and 0 rejected for like 2 mins with 2 good rigs in solo, is it ok?

I have 1 block in 50 mins with 2 Mh/s

[chip99]

15 gpus and 1 block after almost 1 hour a new all time low record for me. not bad utc not bad.

[cointradero]

It takes a little bit more technical savvy, but technically, everything works.  I'm still not loving the percent of orphans I'm getting, but everything is working if you get your stuff setup right.  

solo ? how do you tell if it's an orphan when you solo?

You'll see that you've found a block but nothing will show up in your wallet.  If you go to the debug window and type "listtransactions" it will show you what happen to those supposed found blocks.  They are always orphans though.  

[grimoir]

so i've downloaded the wallet, opened the console, typed "setgenerate true" my machine is whiring. do i need to do anything else? how do i tell if i've hit a block? the console doesn't show anything other than the command i've just put in.

ta

that is bad idea to do..
you must mine with modified cgminer..
links in first page..
point your miner to 127.0.0.1 and have config file set properly.. also noted at first page..

I have
rpcuser=user
rpcpassword=pass
rpcport=44101
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1

And I cant solo...

and did you start your wallet with this config? also you have to have -u user and -p pass in your config.. as well as -o 127.0.0.1:44101

Downloaded the miner from the first post, can't find the config file. there's no ultracoin.conf in there?

open a notepad file and save as ultracoin.conf