[ANN] LEASERIG.NET - rent&hire Quark hashing power!

[bitlynx]

Hey. I discovered where is the issue with your rig. You have BOTH methods enabled! I will add this to the GUIDE - both methods should not be enabled from now on, because after server restart, pools may be taken from your cgminer API - and there are usually local IPs. Just terminate support for method B and you will be good to go.

Rats!  I didn't leave it active on purpose.  I had intended to but forgot to disable my incoming API ports from the old method.  Doh!

So, back to my begging - please enable logging (first) and then add (a simple) API to LRP so we can see what's happening and be able to review history.  One issue with LRP is that we have zero transparency without needing to constantly log into the LR admin interface.  When we were using the old method, we could use the miner log, cgwatcher logs, cgwatcher data logging, etc.

[bitlynx]

I once got a customer, which wanted to solomine. Obviously, every solomining guide tels you to point your miner to your wallet, which is at 127.0.0.1 or localhost, so he did

Isn't this your case too?

Good question.  I asked and the renter said no, because he was interested in mining Hex, which is what he returned to mining once he got my messages.

[miner4m0]

I seem to be having an issue where the leaserig.net web service wants to keep jamming an invalid pool into the configuration for leaserigproxy (running on Linux).  

The pool was initially displayed as stratum+tcp://pool.teamdoge.com:80.  That is invalid and it is marked as dead.  I added stratum+tcp://pool.teamdoge.com:3333 and it says it is alive.

It keeps removing the 3333 entry and pushing the port 80 entry to the proxy.  I add it back and it keeps overwriting it.

What is the deal here?  

[djeZo]

Make sure you add this entry via web panel !

[miner4m0]

Make sure you add this entry via web panel !

Yep, that is what I was doing.  After that didn't work through several iterations, I tried killing leaserigproxy, updating pools.conf and starting it back up. Same result.

[djeZo]

Make sure you add this entry via web panel !

Yep, that is what I was doing.  After that didn't work through several iterations, I tried killing leaserigproxy, updating pools.conf and starting it back up. Same result.

If you do manual modification of pools.conf it won't work. The only way to change pools during lease time is via web. This is feature wanted by many so I implemented it.

[miner4m0]

Make sure you add this entry via web panel !

Yep, that is what I was doing.  After that didn't work through several iterations, I tried killing leaserigproxy, updating pools.conf and starting it back up. Same result.

If you do manual modification of pools.conf it won't work. The only way to change pools during lease time is via web. This is feature wanted by many so I implemented it.

That makes sense, and is what I expected. I only attempted it after the web interface completely failed and kept inserting the same dead server while serially removing the actual live one.

[djeZo]

CUSTOMERS REFERRAL PROGRAM IN PLACE

If you can bring in some customers and would like to earn some % of their purchases, then visit: http://leaserig.net/index.jsp?page=account&r (note: you will need customers account).

[salsamoves]

CUSTOMERS REFERRAL PROGRAM IN PLACE

If you can bring in some customers and would like to earn some % of their purchases, then visit: http://leaserig.net/index.jsp?page=account&r (note: you will need customers account).

great! Lets all get to it, might help raise our prices a bit!

[Strov]

Make sure you add this entry via web panel !

Yep, that is what I was doing.  After that didn't work through several iterations, I tried killing leaserigproxy, updating pools.conf and starting it back up. Same result.

If you do manual modification of pools.conf it won't work. The only way to change pools during lease time is via web. This is feature wanted by many so I implemented it.

That makes sense, and is what I expected. I only attempted it after the web interface completely failed and kept inserting the same dead server while serially removing the actual live one.

my customer has exactly the same problem.
the pool switch every few minutes to "stratum+tcp://wdc.cryptodiggers.eu:80". but this is a dead port. when he change it on your site it wouldnt save for long.

i didnt do anything with my rig, so it shouldnt be a problem on my site.

[djeZo]

There are some issues with the people use pools without ports. This confuses the algorithm and starts pushing pool without port. I am still looking into it what exactly to fix to make it work in such situations.

Edit: OK, I hope I fixed it.

[djeZo]

DOGE payments are not possible at the moment, because cryptsy API regarding DOGE is down. We will have to wait.

EDIT: Possible now.

[Strov]

There are some issues with the people use pools without ports. This confuses the algorithm and starts pushing pool without port. I am still looking into it what exactly to fix to make it work in such situations.

Edit: OK, I hope I fixed it.

Its working.
But the downtime wasnt very nice for both 

[exoton]

i want to rent a rig for a pool where you can personally adjust difficulty , what dif for what mh-rate do you suggest ?
also , if the pool goes offline and my secondary pool is started will it automaticly switch back when the first pool is back up ?

[djeZo]

i want to rent a rig for a pool where you can personally adjust difficulty , what dif for what mh-rate do you suggest ?
also , if the pool goes offline and my secondary pool is started will it automaticly switch back when the first pool is back up ?

1. Ask pool provider.
2. Yes.

[djeZo]

A word to providers that have several rigs. I really suggest you to group them together with LRP. Big farms are rented out much more often and for higher prices - that is my observation for past several days.

[mattbigblue]

djezo, what changes did You make in service in past few days?

There is something wrong. I didn't change anything and have been mining/renting happily for few weeks now and just today I've noticed weird behaviour.
- Customer rent a rig from me, deleted my pools, add his but on my computer it didn't write down into conf file. So if I restart miner, his details will be lost.

[djeZo]

djezo, what changes did You make in service in past few days?

There is something wrong. I didn't change anything and have been mining/renting happily for few weeks now and just today I've noticed weird behaviour.
- Customer rent a rig from me, deleted my pools, add his but on my computer it didn't write down into conf file. So if I restart miner, his details will be lost.

That doesn't matter so much anymore. LeaseRig is now checking for pools every minute and adjusting them back in case they were changed off the site. Figured it is pointless to fight this, because we were always hit by the issue of cgminer not being able to save pools by priority and certain % of providers still not having fully correct configuration with their cgminers.

[fishyfishy]

what's up with this guy?

bitlynx   Bob    6.50   8.00000000   734   97.23%   Hash. 6.17 MH/s   In 11 hours and 57 minutes

))

8 BTC with 6.5 Mh/s - this means...50 BTC? )

[djeZo]

Maybe he doesn't want rig to be rented out