Real Time Charting, Order Book, and Time & Sales

[Clark]

But sometimes I have a trouble recognizing sound signals (not sure if anybody mentioned it).

Probably not everybody has perfect ear to distinguish sound tones if there is a significant time interval between them. Could you please use more complicated sound samples so that it is easier to distinguish them? Or you could just combine the existing two (instead of "high" and "low" you could play "low-high" and "high-low"). Should be easy to implement.

I could look into this. Down sounds could have a downward pitch ramp, and upward for Up. That way it's not just the same two sounds at different pitch.

[1714957806]

1714957806

[1714957806]

1714957806

[1714957806]

1714957806

[elux]

But sometimes I have a trouble recognizing sound signals (not sure if anybody mentioned it).

Probably not everybody has perfect ear to distinguish sound tones if there is a significant time interval between them. Could you please use more complicated sound samples so that it is easier to distinguish them? Or you could just combine the existing two (instead of "high" and "low" you could play "low-high" and "high-low"). Should be easy to implement.

I could look into this. Down sounds could have a downward pitch ramp, and upward for Up. That way it's not just the same two sounds at different pitch.

That'd be great! Also: Loudness. The default, 100% sound volume can be... painful, when wearing a headset.

[zhalox]

But sometimes I have a trouble recognizing sound signals (not sure if anybody mentioned it).

Probably not everybody has perfect ear to distinguish sound tones if there is a significant time interval between them. Could you please use more complicated sound samples so that it is easier to distinguish them? Or you could just combine the existing two (instead of "high" and "low" you could play "low-high" and "high-low"). Should be easy to implement.

I could look into this. Down sounds could have a downward pitch ramp, and upward for Up. That way it's not just the same two sounds at different pitch.

That'd be great! Also: Loudness. The default, 100% sound volume can be... painful, when wearing a headset.

This^  

Also, a much-desired feature would be to have varying sounds play when specifying an upper/lower price boundary.  E.g., play a "positive" sound if price rises above X price point and play a "negative" sound if the price falls below Y price point (where X & Y are defined in user-submitted values into text boxes, as in the "Calculators" feature).  If you implement this, I'll be sure to send some extra donations

[Transisto]

Please add more volumes into play sound.

0 = ?
0.001 = really ?
0.01 = beep all the time
0.1 = same

I am currently stuck between 100 being irrelevant and 1000 being too big.

[PuertoLibre]

It appears that the Real Time Charting, Order Book and Time and Sales are all broken in IE 10 (Win7 64bit).

On Win8 64bit (with IE10) it works just fine. I have a perpetual "Attempting to connect via FlashSocket".


07:28:19 > Attempting connection over flashsocket

07:28:18 > Opening streaming data connection.

07:28:18 > Error loading depth of market data.

07:28:18 > Loading full depth of market table.

07:28:18 > Changing depth display to 100 rows.

07:28:18 > Resizing console to 5 lines.


It works fine in every other browser from Firefox to Chrome.

[Clark]

It appears that the Real Time Charting, Order Book and Time and Sales are all broken in IE 10 (Win7 64bit).

On Win8 64bit (with IE10) it works just fine. I have a perpetual "Attempting to connect via FlashSocket".


07:28:19 > Attempting connection over flashsocket

07:28:18 > Opening streaming data connection.

07:28:18 > Error loading depth of market data.

07:28:18 > Loading full depth of market table.

07:28:18 > Changing depth display to 100 rows.

07:28:18 > Resizing console to 5 lines.


It works fine in every other browser from Firefox to Chrome.

I have avoided IE support on purpose, since it's been such a bad browser for so long. I will probably need to look at IE10 when I get the time, but don't expect anything older to work.

[Geremia]

Is there a way to download a CSV file of the data the graph displays? thanks

[ErebusBat]

Is there a way to download a CSV file of the data the graph displays? thanks

http://bitcoincharts.com/about/markets-api/

[Geremia]

Is there a way to download a CSV file of the data the graph displays? thanks

http://bitcoincharts.com/about/markets-api/

Thanks, but is this the same API that Clark Moody uses?

[Clark]

Is there a way to download a CSV file of the data the graph displays? thanks

http://bitcoincharts.com/about/markets-api/

Thanks, but is this the same API that Clark Moody uses?

I use the direct MtGox API for trades and compute the bars. There is no CSV file for the exact data I display, but that Bitcoin Charts resource should be pretty good.

[Geremia]

I use the direct MtGox API for trades and compute the bars. There is no CSV file for the exact data I display, but that Bitcoin Charts resource should be pretty good.

Thanks

[PuertoLibre]

It appears that the Real Time Charting, Order Book and Time and Sales are all broken in IE 10 (Win7 64bit).

On Win8 64bit (with IE10) it works just fine. I have a perpetual "Attempting to connect via FlashSocket".


07:28:19 > Attempting connection over flashsocket

07:28:18 > Opening streaming data connection.

07:28:18 > Error loading depth of market data.

07:28:18 > Loading full depth of market table.

07:28:18 > Changing depth display to 100 rows.

07:28:18 > Resizing console to 5 lines.


It works fine in every other browser from Firefox to Chrome.

I have avoided IE support on purpose, since it's been such a bad browser for so long. I will probably need to look at IE10 when I get the time, but don't expect anything older to work.

I understand, it just that I expected it to work for that browser since it is one of the few that accepts macros and basic automation.

If you need anything extra (info wise) just let me know.

[baracuda]

Please add more volumes into play sound.

0 = ?
0.001 = really ?
0.01 = beep all the time
0.1 = same

I am currently stuck between 100 being irrelevant and 1000 being too big.

If you want to do it on your own, open your browser's javascript console and put...

Code:

$("#soundThresh").append('<option value="250">250</option>').val(250).change();

Should work until page reload. (It'll also become a value on the dropdown.) And you can change 250 to whatever you want.

[101111]

Hi Clark

Would it be possible to have an mBTC option please? see https://bitcointalk.org/index.php?topic=197435.20 Topic: Why I'm switching to mBTC.

[maverick1337]

This may sound weird but is it possible to have a bot notify you (via email/text/etc) when the EMA lines cross, and that only? I don't want it to automatically trade but to just send me a notification of when they cross so I can initiate the trades myself. You wouldn't have to include any trading data or anything. I know people spend a lot o time and effort on their codes and was wondering if this was possible.

Thank you in advance for any help.

[blksith0]

Can you make the chart widget show the price in the title? Similar to what bitcoinity does with its title.

Give ya some coinage if you do it

[maverick1337]

Can you make the chart widget show the price in the title? Similar to what bitcoinity does with its title.

Give ya some coinage if you do it

Why not just use http://bitcoin.clarkmoody.com/

They put the price in the title.

[zero3112]

site api keeps going down is this normal?

[Clark]

site api keeps going down is this normal?

What API?

[silverfish]

Is the "Time & Sales" only updated for USD? ..When I switch to EUR, it doesn't show any data.