svennand
|
|
February 15, 2014, 09:26:00 AM |
|
Ok thx.
And it say on your pool i'm earning 5.2MAX/day which is 86USD/day? This can't be right?
Nah, that value is way off. Gonna talk to nutnut about getting that one fixed max.nut2pools.com
|
|
|
|
Degolep
|
|
February 15, 2014, 09:32:54 AM |
|
ok just by adding "-g 1" i've gotten a bump of 15Mh/s. Nothing else? . I'm used to dogecoin where I can play around with my settings and can setup it really nice.
|
|
|
|
juve4v
|
|
February 15, 2014, 09:46:42 AM |
|
Im using this for my 280Xs: cgminer --keccak -I 9 -g 1 -w 256 --gpu-engine 1080 --gpu-memclock 1000 xxxxxxxxxxxxxxxxxx Also remember that with this coin you can turn memory clock way down without losing hashrate!, cards run cooler I set the gpu mem clock outside cgminer -recommended way- with AB to 300 without any issues so far on all my cards. They run cooler and I have more room to OC them if I want.
|
|
|
|
svennand
|
|
February 15, 2014, 10:07:13 AM |
|
Im using this for my 280Xs: cgminer --keccak -I 9 -g 1 -w 256 --gpu-engine 1080 --gpu-memclock 1000 xxxxxxxxxxxxxxxxxx Also remember that with this coin you can turn memory clock way down without losing hashrate!, cards run cooler I set the gpu mem clock outside cgminer -recommended way- with AB to 300 without any issues so far on all my cards. They run cooler and I have more room to OC them if I want. I noticed when trying to set the memclock below 1000 cgminer defaulted and forced em to 1500 again. So my lower limit is 1000MHz, but then again its enough to make em run alot cooler, so I'm happy max.nut2pools.com
|
|
|
|
svennand
|
|
February 15, 2014, 10:16:31 AM |
|
ok just by adding "-g 1" i've gotten a bump of 15Mh/s. Nothing else? . I'm used to dogecoin where I can play around with my settings and can setup it really nice. Not for me at least. Those settings give me this range: http://50.87.190.116/monitoring/max.nut2pools.com
|
|
|
|
xorpheus
Member
Offline
Activity: 75
Merit: 10
|
|
February 15, 2014, 10:22:22 AM |
|
ok just by adding "-g 1" i've gotten a bump of 15Mh/s. Nothing else? . I'm used to dogecoin where I can play around with my settings and can setup it really nice. I'm getting 330Mh/s from each Gigabyte HD7950 (GPU 0 and 1 below), F43 Bios. GPU 2 is a XFX HD6950 GPU 3 is a Gigabyte HD7850 cgminer version 3.7.3 - Started: [2014-02-15 09:53:41] - [0 days 13:18:40] [P]ool management [G]PU management S]ettings [D]isplay options [Q]uit (5s):1.033G (avg):1.056Gh/s | A:2777958 R:227985 HW:0 WU:236.0/m WUE:0.0% ST: 2 SS: 0 NB: 1593 LW: 19897 GF: 0 RF: 0 -------------------------------------------------------------------------------- GPU 0: 81.0C 2872RPM | 336.6M/336.8Mh/s | R:6.7% HW:0 WU: 75.2/m T:1 I:13 GPU 1: 79.0C 1756RPM | 338.5M/338.5Mh/s | R:8.1% HW:0 WU: 75.9/m T:1 I:13 GPU 2: 85.5C 3706RPM | 187.7M/188.4Mh/s | R:5.0% HW:0 WU: 42.2/m T:1 I: 7 GPU 3: 61.0C 47% | 192.4M/192.4Mh/s | R:10.6% HW:0 WU: 42.7/m T:1 I:13 -------------------------------------------------------------------------------- GPU 0: 337.2 / 336.8 Mh/s | A:3514 R:249 HW:0 U:4.40/m I:13 xI:0 rI:0 81.0 C F: 73% (2888 RPM) E: 1150 MHz M: 1000 Mhz V: 1.090V A: 99% P: 0% GPU 1: 338.5 / 338.6 Mh/s | A:3598 R:322 HW:0 U:4.51/m I:13 xI:0 rI:0 79.0 C F: 68% (1753 RPM) E: 1150 MHz M: 1000 Mhz V: 1.090V A: 99% P: 0% GPU 2: 189.0 / 188.4 Mh/s | A:1916 R:100 HW:0 U:2.40/m I:7 xI:0 rI:0 85.0 C F: 68% (3704 RPM) E: 900 MHz M: 800 Mhz V: 1.100V A: 99% P: 0% GPU 3: 192.4 / 192.5 Mh/s | A:1939 R:228 HW:0 U:2.43/m I:13 xI:0 rI:0 61.0 C F: 47% E: 1150 MHz M: 1000 Mhz V: 1.138V A: 97% P: 0%
|
|
|
|
Degolep
|
|
February 15, 2014, 10:25:15 AM |
|
can you copy your setting from you .bat file? Also I see you are getting over 6% rejected thats surely not good or?
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
|
February 15, 2014, 10:31:22 AM |
|
Jump in, we're giving out 5 MAX Block Bonus for the Block finder for the next 10 Blocks ! We're constantly over 400GH/s and are finding Blocks on a regular basis. https://max.suprnova.cc
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
onliner
|
|
February 15, 2014, 10:32:59 AM |
|
ok just by adding "-g 1" i've gotten a bump of 15Mh/s. Nothing else? . I'm used to dogecoin where I can play around with my settings and can setup it really nice. I'm getting 330Mh/s from each Gigabyte HD7950Wow! Awesome result! Yeap. Can you copy your setting from you .bat file?
|
|
|
|
xorpheus
Member
Offline
Activity: 75
Merit: 10
|
|
February 15, 2014, 10:41:25 AM |
|
can you copy your setting from you .bat file? Also I see you are getting over 6% rejected thats surely not good or?
Here is my .conf for maxcoin with the pool details removed: <edit> This is for HD7950,7950,6950,7850 in that order </edit> { "pools" :[ { "url" : "<poolurl>:<port>", "user" : "<worker username>", "pass" : "<worker password>" } ] , "keccak" : true, "gpu-engine" : "1150,1150,900,1150", "gpu-memclock" : "1000,1000,800,1000", "intensity" : "13,13,7,13" } I only fiddled with the clocks and intensity, that's all. I get a lot of rejected shares on any coin with a high block rate because of network latency from my location.
|
|
|
|
Bitock
|
|
February 15, 2014, 10:46:21 AM |
|
Write, please, config for 5xgigabyte 270x, 5xgigabyte 7970 and asus r9 280x. I get a lot of rejects with them.
|
|
|
|
tabnk
|
|
February 15, 2014, 10:48:36 AM |
|
|
|
|
|
svennand
|
|
February 15, 2014, 10:49:56 AM |
|
can you copy your setting from you .bat file? Also I see you are getting over 6% rejected thats surely not good or?
Here is my .conf for maxcoin with the pool details removed: <edit> This is for HD7950,7950,6950,7850 in that order </edit> { "pools" :[ { "url" : "<poolurl>:<port>", "user" : "<worker username>", "pass" : "<worker password>" } ] , "keccak" : true, "gpu-engine" : "1150,1150,900,1150", "gpu-memclock" : "1000,1000,800,1000", "intensity" : "13,13,7,13" } I only fiddled with the clocks and intensity, that's all. I get a lot of rejected shares on any coin with a high block rate because of network latency from my location. I had the same issue with my old sapphire 7950 cards. no matter what settings/coin/pool i got around 6% rejects... max.nut2pools.com
|
|
|
|
onliner
|
|
February 15, 2014, 10:53:57 AM |
|
can you copy your setting from you .bat file? Also I see you are getting over 6% rejected thats surely not good or?
Here is my .conf for maxcoin with the pool details removed: <edit> This is for HD7950,7950,6950,7850 in that order </edit> { "pools" :[ { "url" : "<poolurl>:<port>", "user" : "<worker username>", "pass" : "<worker password>" } ] , "keccak" : true, "gpu-engine" : "1150,1150,900,1150", "gpu-memclock" : "1000,1000,800,1000", "intensity" : "13,13,7,13" } I only fiddled with the clocks and intensity, that's all. I get a lot of rejected shares on any coin with a high block rate because of network latency from my location. I had the same issue with my old sapphire 7950 cards. no matter what settings/coin/pool i got around 6% rejects...Because block time is very small, 30 seconds! That why you have so much rejections. Bitcoin has block time 10 minutes and almost zero rejections. It is normal.I have rejects too!
|
|
|
|
svennand
|
|
February 15, 2014, 10:54:30 AM |
|
Write, please, config for 5xgigabyte 270x, 5xgigabyte 7970 and asus r9 280x. I get a lot of rejects with them.
on my asus 280x i get 350mhash with just: -I 9 -w 256 -g 1 --gpu-engine 1080 --gpu-memclock 1000 max.nut2pools.com
|
|
|
|
xorpheus
Member
Offline
Activity: 75
Merit: 10
|
|
February 15, 2014, 10:55:41 AM |
|
ok just by adding "-g 1" i've gotten a bump of 15Mh/s. Nothing else? . I'm used to dogecoin where I can play around with my settings and can setup it really nice. I'm getting 330Mh/s from each Gigabyte HD7950Wow! Awesome result! Yeap. Can you copy your setting from you .bat file? It's just 1150MHz core clock and intensity 13. Worth noting is that my CPU (FX4130 quad @ 3.8GHz) is at 70% and I don't get that with scrypt mining. Maybe system i/o speeds are having an impact.
|
|
|
|
svennand
|
|
February 15, 2014, 10:56:22 AM |
|
can you copy your setting from you .bat file? Also I see you are getting over 6% rejected thats surely not good or?
Here is my .conf for maxcoin with the pool details removed: <edit> This is for HD7950,7950,6950,7850 in that order </edit> { "pools" :[ { "url" : "<poolurl>:<port>", "user" : "<worker username>", "pass" : "<worker password>" } ] , "keccak" : true, "gpu-engine" : "1150,1150,900,1150", "gpu-memclock" : "1000,1000,800,1000", "intensity" : "13,13,7,13" } I only fiddled with the clocks and intensity, that's all. I get a lot of rejected shares on any coin with a high block rate because of network latency from my location. I had the same issue with my old sapphire 7950 cards. no matter what settings/coin/pool i got around 6% rejects...Because block time is very small, 30 seconds! That why you have so much rejections. Bitcoin has block time 10 minutes and almost zero rejections. It is normal.i get your idea, but i had it on any coin. small or long block time didnt matter. my 7970 was under 1% on the same connection/coin/pool max.nut2pools.com
|
|
|
|
Bitock
|
|
February 15, 2014, 11:05:53 AM |
|
Write, please, config for 5xgigabyte 270x, 5xgigabyte 7970 and asus r9 280x. I get a lot of rejects with them.
on my asus 280x i get 350mhash with just: -I 9 -w 256 -g 1 --gpu-engine 1080 --gpu-memclock 1000 max.nut2pools.comThanks! How can I to decrease the rejects?
|
|
|
|
Pustul
|
|
February 15, 2014, 11:08:10 AM |
|
I have a problem with my r9 290s, the memory clock stays at 150mhz whatever I do. I can't change it with cgminer or conf file or even afterburner it always stays at 150...
|
|
|
|
svennand
|
|
February 15, 2014, 11:17:15 AM |
|
Write, please, config for 5xgigabyte 270x, 5xgigabyte 7970 and asus r9 280x. I get a lot of rejects with them.
on my asus 280x i get 350mhash with just: -I 9 -w 256 -g 1 --gpu-engine 1080 --gpu-memclock 1000 max.nut2pools.comThanks! How can I to decrease the rejects? what reject % do you get? im cruising on 0,37% overall on those settings and nut2pools max.nut2pools.com
|
|
|
|
|