Bitcoin Forum
May 17, 2024, 09:07:36 PM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Warning: One or more bitcointalk.org users have reported that they strongly believe that the creator of this topic is a scammer. (Login to see the detailed trust ratings.) While the bitcointalk.org administration does not verify such claims, you should proceed with extreme caution.
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [17] 18 »  All
  Print  
Author Topic: [ANN]ASICMiner Publicly Looking for Potential Customers/Partners for New Chips  (Read 54973 times)
raskul
Sr. Member
****
Offline Offline

Activity: 434
Merit: 250



View Profile
May 23, 2014, 04:48:01 PM
 #321

Keep in mind that those numbers where agreed on following the original chip specs.

However, currently delivered chips get a maximum of around 0,8W/GH in completed devices, so the actual order amount could be considerably lower, as the chips are way off-spec.

I don't think any chips were sold before AM had them in hand and tested.

https://bitcointalk.org/index.php?topic=622439.0

No AM gen3 complete device showed any number below 1.1 W/GHs

tips    1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
necro_nemesis
Full Member
***
Offline Offline

Activity: 224
Merit: 100


View Profile
May 23, 2014, 04:56:56 PM
 #322

These numbers are derived likely running them near max capacity while unit costs are high. AM should have a long term price advantage to get more ASICs into systems when the economics for this requirement come into play. Unfortunately we haven't the full operating range data yet to see what opportunities exist in that regard.
wpgdeez
Hero Member
*****
Offline Offline

Activity: 728
Merit: 500


View Profile
May 23, 2014, 04:58:57 PM
 #323

There's a sucker born every minute, your going to have to find them to buy this under performing tech.
raskul
Sr. Member
****
Offline Offline

Activity: 434
Merit: 250



View Profile
May 23, 2014, 05:08:37 PM
 #324

Keep in mind that those numbers where agreed on following the original chip specs.

However, currently delivered chips get a maximum of around 0,8W/GH in completed devices, so the actual order amount could be considerably lower, as the chips are way off-spec.

I don't think any chips were sold before AM had them in hand and tested.

still waiting on dividends?  Undecided

tips    1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
Luke-Jr
Legendary
*
Offline Offline

Activity: 2576
Merit: 1186



View Profile
May 23, 2014, 09:11:02 PM
 #325

Some questions...

What is the behaviour if task address is changed while the chip is busy hashing?

What about when address 44 is changed?

How is nonce_mask to be interpreted?

Is there any safeguard against a race clearing r_ready after reading nonce(s)?
For example, the order of events:
  • Host reads nonce from chip
  • Chip finds new nonce
  • Host clears r_ready

novello
Full Member
***
Offline Offline

Activity: 161
Merit: 100



View Profile
May 23, 2014, 10:58:22 PM
 #326

There's a sucker born every minute, your going to have to find them to buy this under performing tech.
I think you may be underestimating the power of the locomotive that is driving this program. Based on what I know about the chip, even if it is a bit of a 'dog' in terms of power consumption, it's small enough to yield in the 90's of percent and will probably cost less than $2.00 to make, test and package in high volume. A 4TH system using 512 of them -running in near threshold mode - could probably be built at a cost of around $1700, including the PSU's. If 'someone' had access to about $15m in liquid capital, they could procure about 6000 of these machines - 3 million chips, or 50 wafer batches, rent a big warehouse in Washington state, pay a few million in setup costs and installation of a 50MVA substation then that could easily be 24PH on hand within 6 months from a standing start (which may have started 2 months ago); with cheap electricity at less than 4 cents/kWh, power consumption becomes a lot less important.

Let's say that difficulty in October is 30 x 10e9 and BTC at $450. This installation would earn about $4.5 million in it's first month, even if the rigs and their cooling gobble up power at 1.2 Joules/gigahash. The 'suckers' would break even in just over 6 months allowing for running costs, but then they might decide to buy some more capacity - they can afford to and there's plenty spare capacity in that substation (and on TSMC's 40nm lines). Once hashing capacity is built and installed and has paid back it's manufacturing, installation costs and interest it can keep on hashing until the power and running costs get too high, and that might take a year or two - think an ROI of over 500%.

Individual miners do not have these resources, even the ones who have 'free' power (whatever that is, it won't last for long once their landlords start realising why their energy bills are so high).

Summary: don't underestimate your competition.


RoadStress
Legendary
*
Offline Offline

Activity: 1904
Merit: 1007


View Profile
May 23, 2014, 11:07:26 PM
 #327

There's a sucker born every minute, your going to have to find them to buy this under performing tech.
I think you may be underestimating the power of the locomotive that is driving this program. Based on what I know about the chip, even if it is a bit of a 'dog' in terms of power consumption, it's small enough to yield in the 90's of percent and will probably cost less than $2.00 to make, test and package in high volume. A 4TH system using 512 of them -running in near threshold mode - could probably be built at a cost of around $1700, including the PSU's. If 'someone' had access to about $15m in liquid capital, they could procure about 6000 of these machines - 3 million chips, or 50 wafer batches, rent a big warehouse in Washington state, pay a few million in setup costs and installation of a 50MVA substation then that could easily be 24PH on hand within 6 months from a standing start (which may have started 2 months ago); with cheap electricity at less than 4 cents/kWh, power consumption becomes a lot less important.

Let's say that difficulty in October is 30 x 10e9 and BTC at $450. This installation would earn about $4.5 million in it's first month, even if the rigs and their cooling gobble up power at 1.2 Joules/gigahash. The 'suckers' would break even in just over 6 months allowing for running costs, but then they might decide to buy some more capacity - they can afford to and there's plenty spare capacity in that substation (and on TSMC's 40nm lines). Once hashing capacity is built and installed and has paid back it's manufacturing, installation costs and interest it can keep on hashing until the power and running costs get too high, and that might take a year or two - think an ROI of over 500%.

Individual miners do not have these resources, even the ones who have 'free' power (whatever that is, it won't last for long once their landlords start realising why their energy bills are so high).

Summary: don't underestimate your competition.



Money don't grow on trees! Wake up!

novello
Full Member
***
Offline Offline

Activity: 161
Merit: 100



View Profile
May 24, 2014, 08:45:44 AM
 #328

There's a sucker born every minute, your going to have to find them to buy this under performing tech.
I think you may be underestimating the power of the locomotive that is driving this program. Based on what I know about the chip, even if it is a bit of a 'dog' in terms of power consumption, it's small enough to yield in the 90's of percent and will probably cost less than $2.00 to make, test and package in high volume. A 4TH system using 512 of them -running in near threshold mode - could probably be built at a cost of around $1700, including the PSU's. If 'someone' had access to about $15m in liquid capital, they could procure about 6000 of these machines - 3 million chips, or 50 wafer batches, rent a big warehouse in Washington state, pay a few million in setup costs and installation of a 50MVA substation then that could easily be 24PH on hand within 6 months from a standing start (which may have started 2 months ago); with cheap electricity at less than 4 cents/kWh, power consumption becomes a lot less important.

Let's say that difficulty in October is 30 x 10e9 and BTC at $450. This installation would earn about $4.5 million in it's first month, even if the rigs and their cooling gobble up power at 1.2 Joules/gigahash. The 'suckers' would break even in just over 6 months allowing for running costs, but then they might decide to buy some more capacity - they can afford to and there's plenty spare capacity in that substation (and on TSMC's 40nm lines). Once hashing capacity is built and installed and has paid back it's manufacturing, installation costs and interest it can keep on hashing until the power and running costs get too high, and that might take a year or two - think an ROI of over 500%.

Individual miners do not have these resources, even the ones who have 'free' power (whatever that is, it won't last for long once their landlords start realising why their energy bills are so high).

Summary: don't underestimate your competition.



Money don't grow on trees! Wake up!

I think you're fooling yourself if you truly believe that. However, that''s your perogative.

RoadStress
Legendary
*
Offline Offline

Activity: 1904
Merit: 1007


View Profile
May 24, 2014, 09:06:55 AM
 #329

There's a sucker born every minute, your going to have to find them to buy this under performing tech.
I think you may be underestimating the power of the locomotive that is driving this program. Based on what I know about the chip, even if it is a bit of a 'dog' in terms of power consumption, it's small enough to yield in the 90's of percent and will probably cost less than $2.00 to make, test and package in high volume. A 4TH system using 512 of them -running in near threshold mode - could probably be built at a cost of around $1700, including the PSU's. If 'someone' had access to about $15m in liquid capital, they could procure about 6000 of these machines - 3 million chips, or 50 wafer batches, rent a big warehouse in Washington state, pay a few million in setup costs and installation of a 50MVA substation then that could easily be 24PH on hand within 6 months from a standing start (which may have started 2 months ago); with cheap electricity at less than 4 cents/kWh, power consumption becomes a lot less important.

Let's say that difficulty in October is 30 x 10e9 and BTC at $450. This installation would earn about $4.5 million in it's first month, even if the rigs and their cooling gobble up power at 1.2 Joules/gigahash. The 'suckers' would break even in just over 6 months allowing for running costs, but then they might decide to buy some more capacity - they can afford to and there's plenty spare capacity in that substation (and on TSMC's 40nm lines). Once hashing capacity is built and installed and has paid back it's manufacturing, installation costs and interest it can keep on hashing until the power and running costs get too high, and that might take a year or two - think an ROI of over 500%.

Individual miners do not have these resources, even the ones who have 'free' power (whatever that is, it won't last for long once their landlords start realising why their energy bills are so high).

Summary: don't underestimate your competition.



Money don't grow on trees! Wake up!

I think you're fooling yourself if you truly believe that. However, that''s your perogative.

Someone with 15m$ in hand should be better designing their own chip than to buy the underperforming AM chip anyway.

brontosaurus
Sr. Member
****
Offline Offline

Activity: 441
Merit: 250



View Profile
May 25, 2014, 06:35:27 PM
 #330

Why bother re-inventing the wheel, spending probably $3m to get someone to do it for you and missing probably 6-9 months of earnings? It's a no brainer, even with an inefficient solution. With the Bitcoin price rebounding  (for now) it looks more and more attractive.....
dogie
Legendary
*
Offline Offline

Activity: 1666
Merit: 1183


dogiecoin.com


View Profile WWW
May 25, 2014, 09:06:17 PM
 #331

There's a sucker born every minute, your going to have to find them to buy this under performing tech.
will probably cost less than $2.00 to make

Less.

friedcat (OP)
Donator
Legendary
*
Offline Offline

Activity: 848
Merit: 1005



View Profile
May 28, 2014, 09:25:59 AM
 #332

Some questions...

What is the behaviour if task address is changed while the chip is busy hashing?

What about when address 44 is changed?

How is nonce_mask to be interpreted?

Is there any safeguard against a race clearing r_ready after reading nonce(s)?
For example, the order of events:
  • Host reads nonce from chip
  • Chip finds new nonce
  • Host clears r_ready

1) 2) When the chip is busy hashing the values in task addresses (including 44) cannot be changed.

3) Each 1 in the nonce_mask indicates a nonce for the current job. If the number of nonces exceeds 4, the first ones will be dropped.

4) There aren't safeguards.

For 1) and 2) we suggest a higher SPI clock for better efficiency. Using the difficulty setting larger than 1 could alleviate most hashrate losses caused by 3) and 4).

marto74
Hero Member
*****
Offline Offline

Activity: 728
Merit: 500



View Profile WWW
May 28, 2014, 09:56:39 AM
 #333

Any chance I get an answer to my mails and PM's about sample chips , datasheet , pricing etc.

http://technobit.eu
tips : 12DNdacCtUZ99qcP74FwchaCPzeDL9Voff
Luke-Jr
Legendary
*
Offline Offline

Activity: 2576
Merit: 1186



View Profile
May 28, 2014, 10:19:39 AM
 #334

Some questions...

What is the behaviour if task address is changed while the chip is busy hashing?

What about when address 44 is changed?

How is nonce_mask to be interpreted?

Is there any safeguard against a race clearing r_ready after reading nonce(s)?
For example, the order of events:
  • Host reads nonce from chip
  • Chip finds new nonce
  • Host clears r_ready

1) 2) When the chip is busy hashing the values in task addresses (including 44) cannot be changed.

3) Each 1 in the nonce_mask indicates a nonce for the current job. If the number of nonces exceeds 4, the first ones will be dropped.

4) There aren't safeguards.

For 1) and 2) we suggest a higher SPI clock for better efficiency. Using the difficulty setting larger than 1 could alleviate most hashrate losses caused by 3) and 4).
Hmm, is there any way to tell the chip to abort processing a work then?
Or we just need to wait it out?

friedcat (OP)
Donator
Legendary
*
Offline Offline

Activity: 848
Merit: 1005



View Profile
May 30, 2014, 04:00:29 PM
 #335

Some questions...

What is the behaviour if task address is changed while the chip is busy hashing?

What about when address 44 is changed?

How is nonce_mask to be interpreted?

Is there any safeguard against a race clearing r_ready after reading nonce(s)?
For example, the order of events:
  • Host reads nonce from chip
  • Chip finds new nonce
  • Host clears r_ready

1) 2) When the chip is busy hashing the values in task addresses (including 44) cannot be changed.

3) Each 1 in the nonce_mask indicates a nonce for the current job. If the number of nonces exceeds 4, the first ones will be dropped.

4) There aren't safeguards.

For 1) and 2) we suggest a higher SPI clock for better efficiency. Using the difficulty setting larger than 1 could alleviate most hashrate losses caused by 3) and 4).
Hmm, is there any way to tell the chip to abort processing a work then?
Or we just need to wait it out?
The soft reset can be triggered no matter if the chip is working or not. After that you need to reconfigure the PLL though, which will take about 0.2ms.

thatguy42
Newbie
*
Offline Offline

Activity: 37
Merit: 0


View Profile
June 07, 2014, 02:35:29 AM
 #336

Will these chips ever be available to the public; in reasonable quantities ? 
I'm sure www.digikey.com/ or www.jameco.com and others, could sell a fair number.
Any resellers planned for this summer ?
CanaryInTheMine
Donator
Legendary
*
Offline Offline

Activity: 2352
Merit: 1060


between a rock and a block!


View Profile
June 07, 2014, 04:00:11 PM
 #337

Will these chips ever be available to the public; in reasonable quantities ? 
I'm sure www.digikey.com/ or www.jameco.com and others, could sell a fair number.
Any resellers planned for this summer ?
it is planned
hdbuck
Legendary
*
Offline Offline

Activity: 1260
Merit: 1002



View Profile
June 07, 2014, 04:09:23 PM
 #338

Will these chips ever be available to the public; in reasonable quantities ?  
I'm sure www.digikey.com/ or www.jameco.com and others, could sell a fair number.
Any resellers planned for this summer ?
it is planned

canary, if thats not too indiscreet, from whom did you already ordered AMgen3 based products? Rockminer? will you also be reselling AM chips Huh
CanaryInTheMine
Donator
Legendary
*
Offline Offline

Activity: 2352
Merit: 1060


between a rock and a block!


View Profile
June 07, 2014, 04:28:09 PM
 #339

Will these chips ever be available to the public; in reasonable quantities ?  
I'm sure www.digikey.com/ or www.jameco.com and others, could sell a fair number.
Any resellers planned for this summer ?
it is planned

canary, if thats not too indiscreet, from whom did you already ordered AMgen3 based products? Rockminer? will you also be reselling AM chips Huh
rockminer.  chip sales channels are being developed. ofcourse, a large order can be placed with ASICMiner directly at any time.
marto74
Hero Member
*****
Offline Offline

Activity: 728
Merit: 500



View Profile WWW
June 07, 2014, 07:16:45 PM
 #340

I got tracking  so sample chips are on the way to me Cheesy
Some info about chip sales chanel  in the range of 100 , 500, 1k,  and so would be useful

http://technobit.eu
tips : 12DNdacCtUZ99qcP74FwchaCPzeDL9Voff
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [17] 18 »  All
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!