cod3gen
Member
Offline
Activity: 311
Merit: 69
PowerMining.pw
|
|
June 24, 2018, 12:46:49 PM Last edit: June 24, 2018, 01:32:04 PM by cod3gen |
|
Added ZCL, ZEL, BTCP and VOT stratums to Powermining.pw Equihash Pool Status: https://www.powermining.pw/site/gomining?algo=equihashZencash(ZEN): URL: stratum+tcp://pool.powermining.pw:2142 Worker: YOUR ZENCASH WALLET ADDRESS Password: Any password to identify your worker
Zelcash(ZEL): URL: stratum+tcp://pool.powermining.pw:2143 Worker: YOUR ZELCASH WALLET ADDRESS Password: Any password to identify your worker
Zclassic(ZCL): URL: stratum+tcp://pool.powermining.pw:2144 Worker: YOUR ZCLASSIC WALLET ADDRESS Password: Any password to identify your worker
VoteCoin(VOT): URL: stratum+tcp://pool.powermining.pw:2145 Worker: YOUR VOTECOIN WALLET ADDRESS Password: Any password to identify your worker
Bitcoin Private(BTCP): URL: stratum+tcp://pool.powermining.pw:2146 Worker: YOUR BTCP WALLET ADDRESS Password: Any password to identify your worker
Example Config: Frontend: I`m also one of those that have been running the miner at 750 Mhz now for 24hr. No issues yet, all accepted shares and not a single HW error.
|
|
|
|
KaydenC
|
|
June 24, 2018, 12:57:51 PM |
|
Thank you for posting, let us know if you keep it at 750 and how it responds. Also, I see you are on MPH. For some reason my Z9 is earning on MPH, but it is not registering on the dashboard, graphs, worker page etc. Did you have any similar problems? I have successfully mined using the Equihash switching, BTG, ZEN, ZCL and ZEC. I am generating coins but no record of my miner at all on the pool.
For equihash auto switch, gotta add the workername to the individual equihash coins for it to show. I have the same issue with my GPU rigs.
|
|
|
|
htautosjay
Newbie
Offline
Activity: 168
Merit: 0
|
|
June 24, 2018, 02:06:13 PM |
|
Added ZCL, ZEL, BTCP and VOT stratums to Powermining.pw Equihash Pool Status: https://www.powermining.pw/site/gomining?algo=equihashZencash(ZEN): URL: stratum+tcp://pool.powermining.pw:2142 Worker: YOUR ZENCASH WALLET ADDRESS Password: Any password to identify your worker
Zelcash(ZEL): URL: stratum+tcp://pool.powermining.pw:2143 Worker: YOUR ZELCASH WALLET ADDRESS Password: Any password to identify your worker
Zclassic(ZCL): URL: stratum+tcp://pool.powermining.pw:2144 Worker: YOUR ZCLASSIC WALLET ADDRESS Password: Any password to identify your worker
VoteCoin(VOT): URL: stratum+tcp://pool.powermining.pw:2145 Worker: YOUR VOTECOIN WALLET ADDRESS Password: Any password to identify your worker
Bitcoin Private(BTCP): URL: stratum+tcp://pool.powermining.pw:2146 Worker: YOUR BTCP WALLET ADDRESS Password: Any password to identify your worker
Example Config: https://preview.ibb.co/jg9Vzo/z91_miner_config.pngFrontend: https://preview.ibb.co/hdTOKo/zclassic.pngI`m also one of those that have been running the miner at 750 Mhz now for 24hr. No issues yet, all accepted shares and not a single HW error. That is a bit of brilliant information, i was wondering how to set up my Z9 its coming this week..would you use Antpool for mining Zcash?...Thanks
|
|
|
|
cod3gen
Member
Offline
Activity: 311
Merit: 69
PowerMining.pw
|
|
June 24, 2018, 03:02:35 PM |
|
Added ZCL, ZEL, BTCP and VOT stratums to Powermining.pw Equihash Pool Status: https://www.powermining.pw/site/gomining?algo=equihashZencash(ZEN): URL: stratum+tcp://pool.powermining.pw:2142 Worker: YOUR ZENCASH WALLET ADDRESS Password: Any password to identify your worker
Zelcash(ZEL): URL: stratum+tcp://pool.powermining.pw:2143 Worker: YOUR ZELCASH WALLET ADDRESS Password: Any password to identify your worker
Zclassic(ZCL): URL: stratum+tcp://pool.powermining.pw:2144 Worker: YOUR ZCLASSIC WALLET ADDRESS Password: Any password to identify your worker
VoteCoin(VOT): URL: stratum+tcp://pool.powermining.pw:2145 Worker: YOUR VOTECOIN WALLET ADDRESS Password: Any password to identify your worker
Bitcoin Private(BTCP): URL: stratum+tcp://pool.powermining.pw:2146 Worker: YOUR BTCP WALLET ADDRESS Password: Any password to identify your worker
Example Config: Frontend: I`m also one of those that have been running the miner at 750 Mhz now for 24hr. No issues yet, all accepted shares and not a single HW error. That is a bit of brilliant information, i was wondering how to set up my Z9 its coming this week..would you use Antpool for mining Zcash?...Thanks Antpool should work fine for Zcash, but there are other pools in first post who have ZEC also thats confirmed to work.
|
|
|
|
SlushPool official
Copper Member
Member
Offline
Activity: 94
Merit: 12
BTC mining: Slush Pool, Stratum V2 & Braiins OS+
|
|
June 24, 2018, 05:16:25 PM |
|
Hello, just wanna let you know that we have gathered the necessary data for Z9 and we are working on a fix. Thank you for your assistance!
We would still appreciate your help with Innosilicon A9 ZMaster tho.
|
|
|
|
htautosjay
Newbie
Offline
Activity: 168
Merit: 0
|
|
June 24, 2018, 05:53:51 PM |
|
Added ZCL, ZEL, BTCP and VOT stratums to Powermining.pw Equihash Pool Status: https://www.powermining.pw/site/gomining?algo=equihashZencash(ZEN): URL: stratum+tcp://pool.powermining.pw:2142 Worker: YOUR ZENCASH WALLET ADDRESS Password: Any password to identify your worker
Zelcash(ZEL): URL: stratum+tcp://pool.powermining.pw:2143 Worker: YOUR ZELCASH WALLET ADDRESS Password: Any password to identify your worker
Zclassic(ZCL): URL: stratum+tcp://pool.powermining.pw:2144 Worker: YOUR ZCLASSIC WALLET ADDRESS Password: Any password to identify your worker
VoteCoin(VOT): URL: stratum+tcp://pool.powermining.pw:2145 Worker: YOUR VOTECOIN WALLET ADDRESS Password: Any password to identify your worker
Bitcoin Private(BTCP): URL: stratum+tcp://pool.powermining.pw:2146 Worker: YOUR BTCP WALLET ADDRESS Password: Any password to identify your worker
Example Config: https://preview.ibb.co/jg9Vzo/z91_miner_config.pngFrontend: https://preview.ibb.co/hdTOKo/zclassic.pngI`m also one of those that have been running the miner at 750 Mhz now for 24hr. No issues yet, all accepted shares and not a single HW error. That is a bit of brilliant information, i was wondering how to set up my Z9 its coming this week..would you use Antpool for mining Zcash?...Thanks Antpool should work fine for Zcash, but there are other pools in first post who have ZEC also thats confirmed to work. Brilliant thank you, awesome share btw.. thanks again
|
|
|
|
crazydane
|
|
June 25, 2018, 03:50:43 AM |
|
Thank you for posting, let us know if you keep it at 750 and how it responds. Also, I see you are on MPH. For some reason my Z9 is earning on MPH, but it is not registering on the dashboard, graphs, worker page etc. Did you have any similar problems? I have successfully mined using the Equihash switching, BTG, ZEN, ZCL and ZEC. I am generating coins but no record of my miner at all on the pool.
For equihash auto switch, gotta add the workername to the individual equihash coins for it to show. I have the same issue with my GPU rigs. Are you sure BTG is working on MPH? When I look at the MPH Auto Exchange supported exchanges, it doesn't look like any of them are working with BTG:
|
|
|
|
crazydane
|
|
June 25, 2018, 10:36:14 AM Last edit: June 25, 2018, 10:51:16 AM by crazydane |
|
Received the following response from NH this morning regarding Z9 support:
|
|
|
|
mfurman
Jr. Member
Offline
Activity: 173
Merit: 2
|
|
June 25, 2018, 10:40:35 AM Last edit: June 25, 2018, 11:51:37 AM by mfurman |
|
I got a different response from NiceHash:
Dear NiceHash user!
We are getting reports from multiple users that they are getting rejected shares on their Z9. Unfortunately, the algorithm protocol in the miner does not match with ours. Bitmain needs to release a firmware update specific for NiceHash.
Please note that there are currently over 100.000 workers connected to Equihash stratum server.
By knowing that, you can conclude that the problem is not with us. There must be something wrong with the Z9 miner, since it’s not compatible with us and unfortunately there is nothing that we can do about it.
We encourage you to contact Bitmain and ask them why the Z9 miner is not working with NiceHash.
Kind regards, NiceHash Team
Ps.
Here is their update to my ticket:
We hope to resolve the issue with this miner, but we can't do anything on our end at this time. We need to wait for Bitmain to release a firmware update.
Kind regards, NiceHash Team
|
|
|
|
crazydane
|
|
June 25, 2018, 10:52:26 AM |
|
Got the same follow up response. Updated original post.
|
|
|
|
Longsnowsm
|
|
June 25, 2018, 11:29:59 AM |
|
This is disappointing that Nicehash didn't have a response that helps us. I figure it was just a parameter or setting that we could use to help. I tried to point my miner at Nicehash and 50% rejects. I tried Antpool and I could never get the stats to show up on antpool. So I ended up on flypool and that seems to be working.
|
|
|
|
mfurman
Jr. Member
Offline
Activity: 173
Merit: 2
|
|
June 25, 2018, 11:38:40 AM Last edit: June 25, 2018, 11:49:29 AM by mfurman |
|
I might be not looking right at Flypool help files but what is exactly their setup for ZEC, please? I mean, is it just:
Server asia1-zcash.flypool.org eu1-zcash.flypool.org us1-zcash.flypool.org Stratum Port 3333 Alt. Stratum Port 13333 Encrypted Stratum Portt 3443 (Encrypted stratum is currently only supported by the Claymore and Optiminer miner) Username Your Zcash Address e.g.: t1YZMnyXStuGKykkFxM6Lh8DTVJdTMx6R51 Password Leave empty or enter your custom share difficulty (default difficulty is 2000)
or more elaborate
They did not respond to my question, yet. Thank you.
|
|
|
|
htautosjay
Newbie
Offline
Activity: 168
Merit: 0
|
|
June 25, 2018, 04:27:47 PM |
|
This is disappointing that Nicehash didn't have a response that helps us. I figure it was just a parameter or setting that we could use to help. I tried to point my miner at Nicehash and 50% rejects. I tried Antpool and I could never get the stats to show up on antpool. So I ended up on flypool and that seems to be working.
I set mine up today on Antpool and it works perfect at 15 sols 675Mhz
|
|
|
|
greyday (OP)
Member
Offline
Activity: 434
Merit: 52
|
|
June 25, 2018, 07:16:31 PM |
|
Received the following response from NH this morning regarding Z9 support: Hmm. Is it just me, or are these word for word the exact same responses they sent out about the A3 and X3 as well?
|
|
|
|
engineerking
Newbie
Offline
Activity: 19
Merit: 0
|
|
June 25, 2018, 07:32:17 PM |
|
What are the potential risks of running at full overclock -- 750. Dropped shares? Brick it? Does the z9 mini shut off it the temp gets too high? At 750, the three chains are averaging about 62 degrees. It is a cooler day today, and wonder if I should turn it down on one of the 100 degree summer days coming up.
|
|
|
|
htautosjay
Newbie
Offline
Activity: 168
Merit: 0
|
|
June 25, 2018, 08:28:55 PM |
|
What are the potential risks of running at full overclock -- 750. Dropped shares? Brick it? Does the z9 mini shut off it the temp gets too high? At 750, the three chains are averaging about 62 degrees. It is a cooler day today, and wonder if I should turn it down on one of the 100 degree summer days coming up.
My thoughts , I run S9's, and the Z9 I installed today overclocked to 675Mhz 14.8 Sols, I could not believe how cool the air is flowing from the front grid!.. the only thing that will kill an overclocked miner is the heat (burning the boards out) i see that the Z9 has a PCB temp reading as well as a Chip temp reading, this is good for monitoring board temps. looks fine to me at 15 Sols, plus its not got the power flowing through it like an S9 (they get hot) Thats just my opinion.
|
|
|
|
cod3gen
Member
Offline
Activity: 311
Merit: 69
PowerMining.pw
|
|
June 25, 2018, 08:39:26 PM |
|
Been running for almost 30hrs straight @ 750 Mhz now, seems to handle it fine. Stable at 62c. Pool reports average of 17.5 kSol/s!
|
|
|
|
mfurman
Jr. Member
Offline
Activity: 173
Merit: 2
|
|
June 25, 2018, 09:25:24 PM |
|
I am finally getting my Z9 tomorrow. Nanopool, that I normally use, still did not respond to me with clarification on the setup. Please tell me if there is anything wrong with Antpool or I should go with Flypool
|
|
|
|
cod3gen
Member
Offline
Activity: 311
Merit: 69
PowerMining.pw
|
|
June 25, 2018, 09:27:36 PM |
|
I am finally getting my Z9 tomorrow. Nanopool, that I normally use, still did not respond to me with clarification on the setup. Please tell me if there is anything wrong with Antpool or I should go with Flypool
Naah, you should go for Powermining.. Well.. unless you only want to mine ZEC ;-) Equihash Pool Status: https://www.powermining.pw/site/gomining?algo=equihash
|
|
|
|
mfurman
Jr. Member
Offline
Activity: 173
Merit: 2
|
|
June 25, 2018, 11:06:00 PM |
|
Thank you. The thing is that I am actually leaning toward just mining Zcash. As the alternative I was considering using NH but this idea got quashed.
|
|
|
|
|