Z9 list of working pools/Fork updates

[mattstyle]

Anyone OC'ed to around 700-800 and know how much watts its pulling? Got mine on a 240~ v PDU without a meter i dont think theres a wattage meter on antminer is there?

running 2 on a 750 watt HP server PSU -- one at 650 and one at 750mhz.. hasn't blown up yet.

[Joykiller]

thx So safe to say 360w~ with an OC?

[cost82el]

thx So safe to say 360w~ with an OC?

406 watss with 750 mh OC  fan 100%  temp 50-53
396 watts with 750 mh OC   auto fan   temp 60-65

[htautosjay]

Anyone OC'ed to around 700-800 and know how much watts its pulling? Got mine on a 240~ v PDU without a meter i dont think theres a wattage meter on antminer is there?

running 2 on a 750 watt HP server PSU -- one at 650 and one at 750mhz.. hasn't blown up yet.

Do you think you can run 2 x Z9's overclocked to 675 from one APW3++?
Thanks

[cost82el]

Anyone OC'ed to around 700-800 and know how much watts its pulling? Got mine on a 240~ v PDU without a meter i dont think theres a wattage meter on antminer is there?

running 2 on a 750 watt HP server PSU -- one at 650 and one at 750mhz.. hasn't blown up yet.

Do you think you can run 2 x Z9's overclocked to 675 from one APW3++?
Thanks

yes, you can

[MinerLamp]

Has anyone been sucessfull w/ bitcoin interest? if so please tell config

I'm mining it with 100% accepted shares on official BCI mining pool. Tried SuperNova too, but getting 100% rejected shares on their BCI pool.

[flatounet]

Has anyone been sucessfull w/ bitcoin interest? if so please tell config

I'm mining it with 100% accepted shares on official BCI mining pool. Tried SuperNova too, but getting 100% rejected shares on their BCI pool.

antpool ?

[10kinds]

Is anyone else seeing issues in MPH with ZEN? Was running fine for a few days, but woke up this AM to rapidly declining payouts.

[jimsta]

Is anyone else seeing issues in MPH with ZEN? Was running fine for a few days, but woke up this AM to rapidly declining payouts.

Looking at their site, maybe something is wrong with the ZEN pool or MPH because the last block they found was 8 hours ago.

[sidog]

Is anyone else seeing issues in MPH with ZEN? Was running fine for a few days, but woke up this AM to rapidly declining payouts.

looks like zen hasn't found a block in over 8 hours.

[sidog]

Suprnova has never really worked for me, even w/ the ccminer port..getting way too many rejects.   Anyone else experiencing the same?   Tested on ZEC and ZEN.

[cod3gen]

Suprnova has never really worked for me, even w/ the ccminer port..getting way too many rejects.   Anyone else experiencing the same?   Tested on ZEC and ZEN.

Is this Z9 or A9?

[sidog]

Suprnova has never really worked for me, even w/ the ccminer port..getting way too many rejects.   Anyone else experiencing the same?   Tested on ZEC and ZEN.

Is this Z9 or A9?

Z9.  i'm running 4 of em.

[cod3gen]

Suprnova has never really worked for me, even w/ the ccminer port..getting way too many rejects.   Anyone else experiencing the same?   Tested on ZEC and ZEN.

Is this Z9 or A9?

Z9.  i'm running 4 of em.

Try powermining for Zen, Z9 is running really smoothly here, but we`re a small pool so it will take longer time in between payouts.

[htautosjay]

Anyone OC'ed to around 700-800 and know how much watts its pulling? Got mine on a 240~ v PDU without a meter i dont think theres a wattage meter on antminer is there?

running 2 on a 750 watt HP server PSU -- one at 650 and one at 750mhz.. hasn't blown up yet.

Do you think you can run 2 x Z9's overclocked to 675 from one APW3++?
Thanks

yes, you can

I have had temps of 80...what temps are you guys getting?

Summary

Elapsed   KSol/S(RT)   KSol/S(avg)   FoundBlocks   LocalWork   Utility   WU   BestShare
24m11s   15.57   16   0   922   7.15   121.47   0

Pools
Pool   URL   User   Status   Diff   GetWorks   Priority   Accepted   Nonce#   DiffA#   DiffR#   DiffS#   Rejected   Discarded   Stale   LSDiff   LSTime
0   stratum+tcp://stratum-zec.antpool.com:8899   HTAutos.z1   Alive   17   32   0   153   0   2,581   53   0   3   761   0   17   0:00:02
1   stratum+tcp://stratum-zec.antpool.com:443   HTAutos.z1   Alive   17   4   1   20   0   304   0   0   0   24   0           17   0:23:29
2   stratum+tcp://stratum-zec.antpool.com:25           HTAutos.z1   Alive      1   2   0   0   0   0   0   0   0   0   0   0
Total               37      173   0   2,885   53   0   3   785   0      
HW   0                     NaN%   0.0000%                     
 AntMiner
 Chain#   ASIC#   Frequency   KSol/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1             4                725   5.30                    0   61                         76              oooo
2             4                725   5.52                    0   60                         73              oooo
3             4                725   4.75                    0   62                         75              oooo

[ltcsprite]

Suprnova has never really worked for me, even w/ the ccminer port..getting way too many rejects.   Anyone else experiencing the same?   Tested on ZEC and ZEN.

Is this Z9 or A9?

Z9.  i'm running 4 of em.

Try powermining for Zen, Z9 is running really smoothly here, but we`re a small pool so it will take longer time in between payouts.

Tested yesterday, would not connect.

[XiriusZ10]

Anyone OC'ed to around 700-800 and know how much watts its pulling? Got mine on a 240~ v PDU without a meter i dont think theres a wattage meter on antminer is there?

running 2 on a 750 watt HP server PSU -- one at 650 and one at 750mhz.. hasn't blown up yet.

Do you think you can run 2 x Z9's overclocked to 675 from one APW3++?
Thanks

yes, you can

I have had temps of 80...what temps are you guys getting?

Summary

Elapsed   KSol/S(RT)   KSol/S(avg)   FoundBlocks   LocalWork   Utility   WU   BestShare
24m11s   15.57   16   0   922   7.15   121.47   0

Pools
Pool   URL   User   Status   Diff   GetWorks   Priority   Accepted   Nonce#   DiffA#   DiffR#   DiffS#   Rejected   Discarded   Stale   LSDiff   LSTime
0   stratum+tcp://stratum-zec.antpool.com:8899   HTAutos.z1   Alive   17   32   0   153   0   2,581   53   0   3   761   0   17   0:00:02
1   stratum+tcp://stratum-zec.antpool.com:443   HTAutos.z1   Alive   17   4   1   20   0   304   0   0   0   24   0           17   0:23:29
2   stratum+tcp://stratum-zec.antpool.com:25           HTAutos.z1   Alive      1   2   0   0   0   0   0   0   0   0   0   0
Total               37      173   0   2,885   53   0   3   785   0      
HW   0                     NaN%   0.0000%                     
 AntMiner
 Chain#   ASIC#   Frequency   KSol/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1             4                725   5.30                    0   61                         76              oooo
2             4                725   5.52                    0   60                         73              oooo
3             4                725   4.75                    0   62                         75              oooo

Hi! I'm getting 45° PCB and 59° chip on average. Fan at 50%. Here we are in winter though.

[cod3gen]

Suprnova has never really worked for me, even w/ the ccminer port..getting way too many rejects.   Anyone else experiencing the same?   Tested on ZEC and ZEN.

Is this Z9 or A9?

Z9.  i'm running 4 of em.

Try powermining for Zen, Z9 is running really smoothly here, but we`re a small pool so it will take longer time in between payouts.

Tested yesterday, would not connect.

Usually Dead only when adding pool for first time, comes alive within a couple minutes when cgminer updates pools again.

[crazydane]

Looks like the boys over at MPH are asleep at the wheel:

https://blog.zencash.com/mandatory-upgrade-zen-2-0-14-super-nodes/

From the above link:

--- cut ---
We are pleased to announce ZenCash 2.0.14 upgrade is now available! All node operators, exchanges, and pool operators must update from the previous version before June 28th when the current version is deprecated and will stop working (at block 332576). Please follow the instructions below.
--- cut ---

[XiriusZ10]

What is the best ZEN mining pool for you guys? I don't like suprnova much.