[ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com

[leomedina01]

Hi,


I used to withdraw with no problems and fast, however since several hours ago, I requested an LTC withdrawal from ltcrabbit.com, and didn't get anything so far....it's still not even in the transaction list. I tried even to change my LTC address, and no success.

I have sent a support ticket since 8 hours ago, and no replies so far. Pls reply and tell me what's going on.

My username is leomedina01.

Thanks.

Issue was solved by support team.

Thanks.

[hacky]

Hello.

No payout today ? Crontab is stuck ?

Have a great week end miners !

[ppanther]

Hello.

No payout today ? Crontab is stuck ?

Have a great week end miners !

Yes, that was a nasty issue. It has been fixed. Payouts today will contain yesterday and today.

[hacky]

Hello.

No payout today ? Crontab is stuck ?

Have a great week end miners !

Yes, that was a nasty issue. It has been fixed. Payouts today will contain yesterday and today.

Thanks, I received !

Congratulations for creating and maintaining this pool, it works flawlessly with my Titan

[hacky]

There are much rejects since april 26th 18:00 on the titan pool. I have 10% rejects since this morning...
Do you see the same problem for other miners ?

My account is : 1CkEVKahW7CwR6mGtk3XkiHWBqAZjpwjAs

Thanks !

[morecoin14]

There are much rejects since april 26th 18:00 on the titan pool. I have 10% rejects since this morning...
Do you see the same problem for other miners ?

My account is : 1CkEVKahW7CwR6mGtk3XkiHWBqAZjpwjAs

Thanks !

Me too, pool stratum+tcp://eu.clevermining.com:3444/#xnsub#skipcbcheck, 10%-20% rejects.

[morecoin14]

should I change to other pool?
pool used stratum+tcp://eu.clevermining.com:3444/#xnsub#skipcbcheck
knc titan
reject rate > 20%    

[TnxBT]

Two things:

1. I mined for like 1 hour and cant see my stats (1PTjdMLTddX3xLm8GpPRgyWfRJWX6AWxnU) any help?

2. How much would i make in a week if i left a miner on 24/7 at 10Ghashes as im looking at buying one.

THANKS!

[ppanther]

@morecoin14
@hacky

The titan reject issue has been solved 3 days ago.

@TnxBT

You seem to use a bitcoin miner (sha256). You have to your a litecoin asic (scrypt) to mine at clevermining.com

[jacobmayes94]

I own a titan, hashes around 340 MH/S with current die settings.

I am bothered by the high fluctuation, sometimes it shows 320 MH/S. other times 200 other times 100, othertimes it drops to 0 then restarts, this is shown both miner and poolside, with average miner hash hovering around 270. this does not occur on other non multipools. Rejected hashrate is low, I use the titan settings recommended in the FAQ.

https://www.clevermining.com/users/1JacobtFpSMx15iKNR2xmPuDLqRVYM9NWc

Is my stats. Is this causing the miner to crash due to aggressive coin switching?

I am using gens firmware.

I am running another test on LTCPool to see what happens and compare what I earn over 3 days as I have with clevermining, although I was thinking of switching to solo mining with nicehash. Although the payouts in BTC is convenient.

Currently my best payment was 0.28 BTC/day, so I am going to test this out on litecoinpool and see what happens, although once I have ROIed I am switching this machine to solo (on my own low latency node I am setting up) to contribute to network decentralization.

due to the power costs of running this, (as  the miner stopping and starting with hashrate isn't reducing the power consumption during the blips by much, indicating to me the chips are still doing some kind of work), if it drops to 0 and restarts then this reduces power consumption during the switch as all the cubes are then idling for a while.

EDIT:

The current mining on litecoin pool is showing stable hash of 320 - 340 MH/s with little variance, I am beginning to wonder if switching pools is the best  but will report back and will see if this is also a clevermining issue or if my titan simply doesn't like aggressive coin switching. A shame because watt for watt and overall price, the titan is the most efficient scrypt miner.

[toptek]

it seems for me running on the titan pool with my a Alchemist 256 miner board makes it run better atm im running one Alchemist miner board off a PI and self powered hub and it's running more stable on the titan port : 3444 over the normal port : 3333.

at this speed setting --set ALC:clock=304 that's one board off a hub plugged into a PI.


it very stable

 

Code:

bfgminer 5.2.0-139-g644c3ad - [2016-05-14 19:30:28] - [  0 days 00:21:11]
 [M]anage devices [P]ool management [S]ettings [D]isplay options  [H]elp [Q]uit
 Pool 0: us.clevermining.co  Diff:48m  +Strtm  LU:[19:51:35]  User:13Xb4RvqoeRum
 Block: ...20462156626049ba  Diff:303 ( 2.18G)  Started: [19:50:45]  I:62.49mBTC
 ST:3  F:0  NB:37  AS:0  BW:[ 75/ 15 B/s]  E:0.15  BS:6
 1            | 44.44/54.93/29.06Mh/s | A:122 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
 ALC 0:       | 60.82/54.50/29.00Mh/s | A:123 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
 [2016-05-14 19:50:27] Network difficulty changed to 259 ( 1.86G)
 [2016-05-14 19:50:27] Stratum from pool 0 detected new block
 [2016-05-14 19:50:29] Accepted 00047a03 ALC 0  Diff 223m/48m
 [2016-05-14 19:50:32] Accepted 00026340 ALC 0  Diff 418m/48m
 [2016-05-14 19:50:36] Network difficulty changed to 277 ( 1.99G)
 [2016-05-14 19:50:36] Stratum from pool 0 detected new block
 [2016-05-14 19:50:45] Network difficulty changed to 303 ( 2.18G)
 [2016-05-14 19:50:45] Stratum from pool 0 detected new block
 [2016-05-14 19:50:52] Accepted 00049e01 ALC 0  Diff 216m/48m
 [2016-05-14 19:51:04] Accepted 00014b5f ALC 0  Diff 772m/48m
 [2016-05-14 19:51:04] Accepted 0011f8ee ALC 0  Diff 55m/48m
 [2016-05-14 19:51:06] Accepted 0008402c ALC 0  Diff 121m/48m
 [2016-05-14 19:51:14] Accepted 0006093c ALC 0  Diff 165m/48m
 [2016-05-14 19:51:19] Accepted 00005cd3 ALC 0  Diff 2/48m
 [2016-05-14 19:51:38] Accepted 001318a0 ALC 0  Diff 52m/48m

[ppanther]

NEW: Clevermining API

You'll find our public pool data including profitability data here:
https://www.clevermining.com/api/v1/public

Private mining data can be found here:
https://www.clevermining.com/api/v1/users/YOUR_BTC_ADDRESS

[ppanther]

Chinese Scrypt miners:

Check out http://cn.clevermining.com:3333 , our new full blown stratum server with priority bandwidth to mainland China.

[jacobmayes94]

the litecoinpool resutled in 0.04 BTC a day, rather than 0.028 BTC a day. I am best not mining here with my titan it seems.

[ppanther]

the litecoinpool resutled in 0.04 BTC a day, rather than 0.028 BTC a day. I am best not mining here with my titan it seems.

You mining graph really looks pathologic. Which batch is your titan miner? Did you use our special titan port? Which version of gentarkin mod did you run?

[cheyne23]

Can I use the china server cause I'm in the philipines?

[ppanther]

@cheyne

You can use any stratum you like. Just run "ping us.clevermining.com" and determine the server location with the lowest ping and best connection quality.

[ppanther]

Clevermining has been successfully migrated to a new ultra powerful server. This further decreases latency of coin switching and improves profitability.

[chrys]

I have a little problem....
I started mining whit NiceHash....
seems i made a mistake whit my username aka btc adress. i put in stead of 33Vv8HKCU4uAE4b3w6FrzUYaKXU12w9R17 i put in this 33Vv8HKCU4uAE4b3w6FrzUYaKXU12w9R1

And something else it doesnt show my mining stats

Ty for the support

[ppanther]

I have a little problem....
I started mining whit NiceHash....
seems i made a mistake whit my username aka btc adress. i put in stead of 33Vv8HKCU4uAE4b3w6FrzUYaKXU12w9R17 i put in this 33Vv8HKCU4uAE4b3w6FrzUYaKXU12w9R1

And something else it doesnt show my mining stats

Ty for the support

Dear Chrys,

no data is recorded, if the BTC address is invalid. Please send me screenshots of all details of your nicehash campaign. I'll check if there is a way. Email: support at miningcentral.freshdesk.com

Best,
PPanther