WildRig Multi 0.40.5 multi-algo miner with low dev-fee (AMD/NVIDIA/INTEL)

[Quake4]

WildRig 0.12.3 with x22i and exosis support

Please, fix nicehash stratums and other small bugs in stratums. i write before...

[1715022688]

1715022688

[andrucrypt]

WildRig 0.12.3 with x22i and exosis support

Please, fix nicehash stratums and other small bugs in stratums. i write before...

I remember that and will take a look on it soon.

[justoiurii]

6 ps RX480 1100/2000, bc drivers, x22i
preview2 - 17900 Mh/s, 750W )
0.12.3 - 17300, 800W (

"rejected" - the same

[andrucrypt]

6 ps RX480 1100/2000, bc drivers, x22i
preview2 - 17900 Mh/s, 750W )
0.12.3 - 17300, 800W (

"rejected" - the same

Strange, ok, will revert some changes to x22i kernel. Also, fixed nicehash problem, so will re-upload new build now.

[sorgu]

exosis  algo enabled?

[andrucrypt]

exosis  algo enabled?

See previous page, last message(and link in OP post to that one). I have posted some links with this algo supported.

[andrucrypt]

WildRig 0.12.3 with x22i and exosis support

Please, fix nicehash stratums and other small bugs in stratums. i write before...

Check links to that preview version. There is a fix for NiceHash. What about aergo - will take a look later, there is some strange problem with that rejects.

6 ps RX480 1100/2000, bc drivers, x22i
preview2 - 17900 Mh/s, 750W )
0.12.3 - 17300, 800W (

"rejected" - the same

Re-uploaded kernels with some reverts, should be around the same now.

[justoiurii]

WildRig 0.12.3 with x22i and exosis support

Please, fix nicehash stratums and other small bugs in stratums. i write before...

Check links to that preview version. There is a fix for NiceHash. What about aergo - will take a look later, there is some strange problem with that rejects.

6 ps RX480 1100/2000, bc drivers, x22i
preview2 - 17900 Mh/s, 750W )
0.12.3 - 17300, 800W (

"rejected" - the same

Re-uploaded kernels with some reverts, should be around the same now.

OK. Now - the same, but slightly powered

[vrottenberg]

Hello!
How to add backup (failover) pools?

[andrucrypt]

Hello!
How to add backup (failover) pools?

Hello, just put one after another --url, --user and --pass parameters, like:

Code:

wildrig.exe ... --url pool1 --user WALLET --pass PASS1 --url pool2 --user WALLET --pass PASS2

and after the start miner should show list of pools you have added(in that header info you can see every time at start).

[yeahman809]

WildRig 0.12.4 with x22i, exosis and skunkhash support

Not an official release just because need to make some benchmarks first.

Download for Windows
Download kernel for Hawaii

Fiji owners: please update your drivers if you get "CL_BUILD_PROGRAM_FAILURE" error.

well dang dev, great work!   im gonna check out that exosis mining now!

[bartol89]

WildRig 0.12.4 with x22i, exosis and skunkhash support

Not an official release just because need to make some benchmarks first.

Download for Windows
Download kernel for Hawaii

Fiji owners: please update your drivers if you get "CL_BUILD_PROGRAM_FAILURE" error.

Can you upload source for Linux ?

[WhyMe]

Getting 205MHs on Exosis for 12 RX570 8Gb @1200/2100, it's ~17MHs per gpu, is that correct hashrate ?

[bartol89]

Getting 205MHs on Exosis for 12 RX570 8Gb @1200/2100, it's ~17MHs per gpu, is that correct hashrate ?

Yes, its good. I'm i have the same rig, but waiting for linux miner version ;/

[andrucrypt]

Uploaded Linux-builds, happy mining But check for accepted shares first and report back.

[bartol89]

Uploaded Linux-builds, happy mining But check for accepted shares first and report back.

HiveOS version 0.5-81:

custom wildrig-multi exited, waiting to cooldown a bit

./wildrig-multi: error while loading shared libraries: libuv.so.1: cannot open shared object file: No such file or directory

[andrucrypt]

Uploaded Linux-builds, happy mining But check for accepted shares first and report back.

HiveOS version 0.5-81:

custom wildrig-multi exited, waiting to cooldown a bit

./wildrig-multi: error while loading shared libraries: libuv.so.1: cannot open shared object file: No such file or directory

Read description in OP post first You need to install dependencies, using this command:

Code:

apt install libuv1 libmicrohttpd10

[Quake4]

Check links to that preview version. There is a fix for NiceHash. What about aergo - will take a look later, there is some strange problem with that rejects.

Yes. Thanks. The NH is work fine:

Code:

 * VERSIONS:     WildRig/0.12.4 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
 * CPU:                  Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz x64 AES-NI
 * ALGO:         x16r
 * POOL #1:      x16r.eu.nicehash.com:3366
 * API PORT:     4028
 * COMMANDS:     hashrate, pause, resume
[14:00:47] donation: 2%
[14:00:47] strategy: 0
[14:00:47] send-stale: no
[14:00:47] watchdog: disabled
[14:00:47] good-risers: default
[14:00:47] compiling code and initializing GPUs. This will take a while...
[14:00:47] GPU #0 [BusID: #1] [Ellesmere] Radeon RX 580 Series
[14:00:47] threads: 3, intensity: 20, worksize: 128/256, cu: 36
[14:00:55] use pool x16r.eu.nicehash.com:3366 172.65.195.195
[14:00:55] Stratum set difficulty to 8.0000
[14:00:55] new job from x16r.eu.nicehash.com:3366 diff 134.22M
[14:00:55] hash order: WrlHamGroJh5SknGroCubHamHamCubBmwJh5ShaBmwKckEch
[14:00:56] new job from x16r.eu.nicehash.com:3366 diff 134.22M
[14:00:56] hash order: WrlHamGroJh5SknGroCubHamHamCubBmwJh5ShaBmwKckEch
[14:01:21] accepted(1/0) diff 134.22M avg. effort 135.94% (80 ms)
[14:01:47] accepted(2/0) diff 134.22M avg. effort 139.06% (87 ms)
[14:01:50] speed 10s/60s/15m 7224 6713 n/a kH/s max: 7302 kH/s
[14:01:51] accepted(3/0) diff 134.22M avg. effort 99.48% (68 ms)
[14:01:51] new job from x16r.eu.nicehash.com:3366 diff 134.22M
[14:01:51] hash order: WrlHamGroJh5SknGroCubHamHamCubBmwJh5ShaBmwKckEch
[14:02:40] new job from x16r.eu.nicehash.com:3366 diff 134.22M
[14:02:40] hash order: SmdWrlKckEchJh5Jh5HamCubSknHamLufBmwShvEchEchGro
[14:02:50] speed 10s/60s/15m 6399 7093 n/a kH/s max: 7302 kH/s
[14:03:35] new job from x16r.eu.nicehash.com:3366 diff 134.22M
[14:03:35] hash order: SmdWrlKckEchJh5Jh5HamCubSknHamLufBmwShvEchEchGro
[14:03:41] accepted(4/0) diff 134.22M avg. effort 213.08% (62 ms)
[14:03:50] speed 10s/60s/15m 6298 6337 n/a kH/s max: 7302 kH/s
[14:03:52] accepted(5/0) diff 134.22M avg. effort 180.31% (79 ms)
[14:03:54] accepted(6/0) diff 134.22M avg. effort 151.95% (88 ms)
[14:03:55] Stratum set difficulty to 4.0000
[14:04:07] new job from x16r.eu.nicehash.com:3366 diff 67.11M
[14:04:07] hash order: FugGroLufEchSmdWrlShvShaLufBlkEchSknKckShaGroFug
[14:04:12] accepted(7/0) diff 67.11M avg. effort 146.76% (72 ms)
[14:04:12] accepted(8/0) diff 67.11M avg. effort 128.61% (70 ms)
[14:04:16] new job from x16r.eu.nicehash.com:3366 diff 67.11M
[14:04:16] hash order: KckHamFugHamKckSmdSmdHamShvKckWrlSknGroShaJh5Blk
[14:04:27] accepted(9/0) diff 67.11M avg. effort 133.24% (66 ms)
[14:04:29] accepted(10/0) diff 67.11M avg. effort 121.64% (78 ms)
[14:04:39] accepted(11/0) diff 67.11M avg. effort 120.67% (76 ms)

error in -h, change: skukhash => skunkhash
but better just to "skunk"

[Quake4]

WildRig 0.12.4 with x22i, exosis and skunkhash support

rx580 skunk on NH: --opencl-threads 3 --opencl-launch 19x128

Code:

[14:18:36] accepted(12/0) diff 171.80M avg. effort 74.79% (75 ms)
[14:18:36] accepted(13/0) diff 171.80M avg. effort 69.18% (64 ms)
[14:18:39] GPU #0: 10s/60s/15m 22263 22406 n/a kH/s
[14:18:39] speed 10s/60s/15m 22263 22406 n/a kH/s max: 22541 kH/s
[14:18:51] accepted(14/0) diff 171.80M avg. effort 77.54% (68 ms)
[14:19:05] accepted(15/0) diff 171.80M avg. effort 84.23% (84 ms)
[14:19:06] new job from skunk.eu.nicehash.com:3362 diff 171.80M
[14:19:23] speed 10s/60s/15m 22240 22252 n/a kH/s max: 22541 kH/s
[14:19:33] accepted(16/0) diff 171.80M avg. effort 101.72% (76 ms)
[14:19:34] accepted(17/0) diff 171.80M avg. effort 96.97% (81 ms)
[14:19:42] accepted(18/0) diff 171.80M avg. effort 97.21% (66 ms)
[14:19:48] accepted(19/0) diff 171.80M avg. effort 96.02% (91 ms)

but sometimes i see a warning:

Code:

[14:48:48] new job from skunk.eu.nicehash.com:3362 diff 171.80M
[14:48:49] [skunk.eu.nicehash.com:3362] seems no support for extranonce, reconnecting without it
[14:49:02] use pool skunk.eu.nicehash.com:3362 172.65.195.187
[14:49:05] Stratum set difficulty to 0.0400

[andrucrypt]

rx580 skunk on NH: --opencl-threads 3 --opencl-launch 19x128

Skunkhash don't benefit from 3 threads as I saw on my cards, so better to stitch with 2 threads and higher intensity(20 instead of 19).

but sometimes i see a warning:

Code:

[14:48:48] new job from skunk.eu.nicehash.com:3362 diff 171.80M
[14:48:49] [skunk.eu.nicehash.com:3362] seems no support for extranonce, reconnecting without it
[14:49:02] use pool skunk.eu.nicehash.com:3362 172.65.195.187
[14:49:05] Stratum set difficulty to 0.0400

Yeah, NiceHash doesn't support that, but works fine anyway. Will improve this and disable trying to get extra nonce subscription. Also I need some more time for testing with NiceHash, because their stratum protocol a bit different from that we have for yiimp-based pools.