WildRig Multi 0.40.9 multi-algo miner with low dev-fee (AMD/NVIDIA/INTEL)

[kokodesu]

Lyra2vc0ban addition was good for me.
Thank you very much.

[ivvi30]

algo x21s hasright asus strix rx570 o4g ~11900kh
https://d.radikal.ru/d07/1812/4c/dbf2add73de2.jpg

[ivvi30]

Can I make donation: 0?

[arierep60]

guys need help, on my AMD 470/570/580 I should use
--opencl-threads 2 --opencl-launch 21x0
or
--opencl-threads 2 --opencl-launch 21x256
and why?
thank you

[justoiurii]

Can I make donation: 0?

wird, dude) who will support the miner for zero?

[andrucrypt]

guys need help, on my AMD 470/570/580 I should use
--opencl-threads 2 --opencl-launch 21x0
or
--opencl-threads 2 --opencl-launch 21x256
and why?
thank you

What algo? This one recommended only for tribus. Also in most cases no need to use 256 for worksize(second value for --opencl-launch), except it works better for you.

[cluburlauber]

Hello
i try to start this miner but i get the following errors.
There are 5*r9 290 Graphic Cards in and i use the new hawai.bin from your side

 * VERSIONS:     WildRig/0.13.4 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
 * CPU:          Intel(R) Celeron(R) CPU        E3200  @ 2.40GHz x64 -AES-NI
 * ALGO:         x16r
 * POOL #1:      eu.pool.gravium.io:3636
 * COMMANDS:     hashrate, pause, resume
[16:50:51] donation: 2%
[16:50:51] strategy: 0
[16:50:51] send-stale: no
[16:50:51] watchdog: disabled
[16:50:51] good-risers: default
[16:50:51] compiling code and initializing GPUs. This will take a while...
[16:50:51] GPU #0 [BusID: #1] [Hawaii] AMD Radeon R9 200 Series
[16:50:51] threads: 1, intensity: 18, worksize: 0/256, cu: 40
[16:50:51] Error CL_BUILD_PROGRAM_FAILURE when calling clBuildProgram
[16:50:51] Failed to start OpenCL threads

I try to install the visual basic programm from your link, but if want to install he says it a newer verson installed.
Graphic Card Driver is from 04.12.2015
Any Idea ?

[andrucrypt]

Hello
i try to start this miner but i get the following errors.
There are 5*r9 290 Graphic Cards in and i use the new hawai.bin from your side

 * VERSIONS:     WildRig/0.13.4 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
 * CPU:          Intel(R) Celeron(R) CPU        E3200  @ 2.40GHz x64 -AES-NI
 * ALGO:         x16r
 * POOL #1:      eu.pool.gravium.io:3636
 * COMMANDS:     hashrate, pause, resume
[16:50:51] donation: 2%
[16:50:51] strategy: 0
[16:50:51] send-stale: no
[16:50:51] watchdog: disabled
[16:50:51] good-risers: default
[16:50:51] compiling code and initializing GPUs. This will take a while...
[16:50:51] GPU #0 [BusID: #1] [Hawaii] AMD Radeon R9 200 Series
[16:50:51] threads: 1, intensity: 18, worksize: 0/256, cu: 40
[16:50:51] Error CL_BUILD_PROGRAM_FAILURE when calling clBuildProgram
[16:50:51] Failed to start OpenCL threads

I try to install the visual basic programm from your link, but if want to install he says it a newer verson installed.
Graphic Card Driver is from 04.12.2015
Any Idea ?

Hi, try newer drivers, 18.3.4 should work

[cluburlauber]

Hello
i try to start this miner but i get the following errors.
There are 5*r9 290 Graphic Cards in and i use the new hawai.bin from your side

 * VERSIONS:     WildRig/0.13.4 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
 * CPU:          Intel(R) Celeron(R) CPU        E3200  @ 2.40GHz x64 -AES-NI
 * ALGO:         x16r
 * POOL #1:      eu.pool.gravium.io:3636
 * COMMANDS:     hashrate, pause, resume
[16:50:51] donation: 2%
[16:50:51] strategy: 0
[16:50:51] send-stale: no
[16:50:51] watchdog: disabled
[16:50:51] good-risers: default
[16:50:51] compiling code and initializing GPUs. This will take a while...
[16:50:51] GPU #0 [BusID: #1] [Hawaii] AMD Radeon R9 200 Series
[16:50:51] threads: 1, intensity: 18, worksize: 0/256, cu: 40
[16:50:51] Error CL_BUILD_PROGRAM_FAILURE when calling clBuildProgram
[16:50:51] Failed to start OpenCL threads

I try to install the visual basic programm from your link, but if want to install he says it a newer verson installed.
Graphic Card Driver is from 04.12.2015
Any Idea ?

Hi, try newer drivers, 18.3.4 should work

Thanks for yor answer. It works but miner show 25MHS with 600W on the wall.Pool show only 12MHS.Thats to small for me.x16r is a awful code for AMD.I go back to equihash.
cluburlauber

[QuintLeo]

I go back to equihash.
cluburlauber

I hope you mean ETHhash, where the R9-290 is still profitable (barely) if you have SUPER CHEAP electric.
They have never been a good choice for Equihash, and with ASIC units widespread on equihash NOTHING GPU is profitable any more unless your electric is FREE.

[redzep]

hi

will this miner work with  phi2 - Argoneum (AGM), not tried it must admit

thanks

[cluburlauber]

I go back to equihash.
cluburlauber

I hope you mean ETHhash, where the R9-290 is still profitable (barely) if you have SUPER CHEAP electric.
They have never been a good choice for Equihash, and with ASIC units widespread on equihash NOTHING GPU is profitable any more unless your electric is FREE.

nothing with this r9 290 is now pofitable. But i mine and hold for the future. A view equihash coins habe the advantage that the difficulty and hashrate is very low.So you can mine more coins as in the past.
I only mine coins who are Asic resistant (Ltz,Zel,Zer.....)

[jasta more]

It seems a lot of people use the 570 cards, didn't the VEGA had any success with the miners?
What coins do you guys find most profitable to mine with your setups?

Vega was not an efficient option on ETH mining (where most 4xx/5xx cards are used), fairly low hashrate vs quite high power consumption.
It DID shine on the original Cryptonight algorithm, once the drivers got fixed for large page support - but that was about the ONLY bright spot for it.

It was also very profitable for few months on lyra algo

[Mr.merson]

Hello, is there an active project for this architecture?

https://imgur.com/a/dIeuukx

[andrucrypt]

Hello, is there an active project for this architecture?

https://imgur.com/a/dIeuukx

Unfortunately no, too old cards and no plans for them in near future.

[andrucrypt]

0.14.0 beta
- added support for lyra2v3, lyra2vc0ban, glt-astralhash, glt-jeonghash, glt-padihash and glt-pawelhash
- correct shutdown of miner

[ridwan-bejo]

Could you add ZCash MTP Algoritm

[..XyZ..]

Could you add ZCash MTP Algoritm

Thats would be awesome!

[andrucrypt]

Could you add ZCash MTP Algoritm

Working on that, but no ETA, except some hope to finish it this week And this is ZCoin, not ZCash )

[IngerDev]

0.14.0 beta
- added support for lyra2v3, lyra2vc0ban, glt-astralhash, glt-jeonghash, glt-padihash and glt-pawelhash
- correct shutdown of miner

Thanks man for adding GLT!