WildRig Multi 0.40.8 multi-algo miner with low dev-fee (AMD/NVIDIA/INTEL)

[andrucrypt]

0.15.0.7, changelog included.

[andrucrypt]

any tips on how to use getwork and mine direct to wallet with wildrig ?

tried that using coinbase as user



wildrig_avx.exe --algo mtp --opencl-threads 1 --opencl-launch 16x0 --url http://192.168.0.15:8382 --user a8rGMA67WQ2DkTU6XYtsgjjFzSxKBFP7B6

this works for ccminer

ccminer.exe -a mtp -o http://192.168.0.15:8382 -u zcoin -p x --no-getwork --coinbase-addr a8rGMA67WQ2DkTU6XYtsgjjFzSxKBFP7B6

SOLO mining not supported.

[kokodesu]

Currently, I am mining mtp and lyra2c0ban with 1PC (mtp: RX580x8Gx1, lyra2c0ban: RX570x4Gx5), 0.15.0.7 opencl error will occur when mining lyra2c0ban.
Does this version move only mtp? Since I get an error for the time being, lyra2c0ban is moving at 0.14.0.

[justoiurii]

Hi, Master. Unfortunately, I can't start new ver. with  --max-difficulty parameter(

[andrucrypt]

Hi, Master. Unfortunately, I can't start new ver. with  --max-difficulty parameter(

What error do you get?

@kokodesu this version for mtp algo only, everything else not tested.

[justoiurii]

Hi, Master. Unfortunately, I can't start new ver. with  --max-difficulty parameter(

What error do you get?

no error: just can't start. Now I'm mining without it. Thanks for reducing.....)

[kokodesu]

Hi, Master. Unfortunately, I can't start new ver. with  --max-difficulty parameter(

What error do you get?
@kokodesu this version for mtp algo only, everything else not tested.

It remains hardened or hangs. The message when you hang is as follows.

* VERSIONS:     WildRig/0.15.0.7 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
 * CPU:                  Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz x64 AES-NI
 * ALGO:         lyra2vc0ban
 * POOL #1:      asia.bsod.pw:2514
 * COMMANDS:     hashrate, pause, resume
[18:47:25] donation: 2%
[18:47:25] strategy: 0
[18:47:25] send-stale: no
[18:47:25] watchdog: enabled
[18:47:25] good-risers: default
[18:47:25] compiling code and initializing GPUs. This will take a while...
[18:47:25] GPU #0 [BusID: #3] [Ellesmere] Radeon RX 580 Series
[18:47:25] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:25] GPU #1 [BusID: #4] [Ellesmere] Radeon RX 580 Series
[18:47:25] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #2 [BusID: #5] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #3 [BusID: #6] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #5 [BusID: #11] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:32] use pool asia.bsod.pw:2514 139.99.116.172
[18:47:32] Stratum set difficulty to 128.0000
[18:47:32] new job from asia.bsod.pw:2514 diff 2.15G
[18:47:44] Stratum set difficulty to 64.0000
[18:47:44] new job from asia.bsod.pw:2514 diff 1.07G
[18:48:02] GPU #0: hangs in OpenCL kernel for more than 30 seconds, exit

[andrucrypt]

Hi, Master. Unfortunately, I can't start new ver. with  --max-difficulty parameter(

What error do you get?
@kokodesu this version for mtp algo only, everything else not tested.

It remains hardened or hangs. The message when you hang is as follows.

* VERSIONS:     WildRig/0.15.0.7 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
 * CPU:                  Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz x64 AES-NI
 * ALGO:         lyra2vc0ban
 * POOL #1:      asia.bsod.pw:2514
 * COMMANDS:     hashrate, pause, resume
[18:47:25] donation: 2%
[18:47:25] strategy: 0
[18:47:25] send-stale: no
[18:47:25] watchdog: enabled
[18:47:25] good-risers: default
[18:47:25] compiling code and initializing GPUs. This will take a while...
[18:47:25] GPU #0 [BusID: #3] [Ellesmere] Radeon RX 580 Series
[18:47:25] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:25] GPU #1 [BusID: #4] [Ellesmere] Radeon RX 580 Series
[18:47:25] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #2 [BusID: #5] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #3 [BusID: #6] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #5 [BusID: #11] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:32] use pool asia.bsod.pw:2514 139.99.116.172
[18:47:32] Stratum set difficulty to 128.0000
[18:47:32] new job from asia.bsod.pw:2514 diff 2.15G
[18:47:44] Stratum set difficulty to 64.0000
[18:47:44] new job from asia.bsod.pw:2514 diff 1.07G
[18:48:02] GPU #0: hangs in OpenCL kernel for more than 30 seconds, exit

Again, why do you use version 0.15 for algo that's not MTP? I wrote that this version ONLY FOR MTP ALGO

[kokodesu]

Hi, Master. Unfortunately, I can't start new ver. with  --max-difficulty parameter(

What error do you get?
@kokodesu this version for mtp algo only, everything else not tested.

It remains hardened or hangs. The message when you hang is as follows.

* VERSIONS:     WildRig/0.15.0.7 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015
 * CPU:                  Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz x64 AES-NI
 * ALGO:         lyra2vc0ban
 * POOL #1:      asia.bsod.pw:2514
 * COMMANDS:     hashrate, pause, resume
[18:47:25] donation: 2%
[18:47:25] strategy: 0
[18:47:25] send-stale: no
[18:47:25] watchdog: enabled
[18:47:25] good-risers: default
[18:47:25] compiling code and initializing GPUs. This will take a while...
[18:47:25] GPU #0 [BusID: #3] [Ellesmere] Radeon RX 580 Series
[18:47:25] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:25] GPU #1 [BusID: #4] [Ellesmere] Radeon RX 580 Series
[18:47:25] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #2 [BusID: #5] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #3 [BusID: #6] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:26] GPU #5 [BusID: #11] [Ellesmere] Radeon RX 580 Series
[18:47:26] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 4096Mb
[18:47:32] use pool asia.bsod.pw:2514 139.99.116.172
[18:47:32] Stratum set difficulty to 128.0000
[18:47:32] new job from asia.bsod.pw:2514 diff 2.15G
[18:47:44] Stratum set difficulty to 64.0000
[18:47:44] new job from asia.bsod.pw:2514 diff 1.07G
[18:48:02] GPU #0: hangs in OpenCL kernel for more than 30 seconds, exit

Again, why do you use version 0.15 for algo that's not MTP? I wrote that this version ONLY FOR MTP ALGO

I understand that only mtp works.
As I was with What error do you get? I was just writing the details.
Sorry for inconvenience caused by lack of understanding.

[siagirl]

How to work in Hawaii

[andrucrypt]

I understand that only mtp works.
As I was with What error do you get? I was just writing the details.
Sorry for inconvenience caused by lack of understanding.

Oh, now I see ) That question about error was for another user

How to work in Hawaii

Donwload kernel-hawaii-mtp.7z file and put *.bin file from it into same folder where wildrig.exe.

[siagirl]

I understand that only mtp works.
As I was with What error do you get? I was just writing the details.
Sorry for inconvenience caused by lack of understanding.

Oh, now I see ) That question about error was for another user

How to work in Hawaii

Donwload kernel-hawaii-mtp.7z file and put *.bin file from it into same folder where wildrig.exe.

Thank you

[ivvi30]

"Version with MTP algo support for ZCoin is here" > WildRig Multi 0.15.0.7 mtp 3% donation!!!

[dragonmike]

Well, Mr Andrucrypt, you've got work to do again since the release of CryptoDredge... There's approx 100% performance to be gained to be about on par with Pascal cards (at least for Vegas that is)... Come on, enough xmas turkey for you, get back to work!

[andrucrypt]

Well, Mr Andrucrypt, you've got work to do again since the release of CryptoDredge... There's approx 100% performance to be gained to be about on par with Pascal cards (at least for Vegas that is)... Come on, enough xmas turkey for you, get back to work!

No more plans for MTP this year Probably only fee lowering to default scheme and release with x16rt support.

[4ward]

Can you add SHA256t?
Still can be pretty profitable (especially if you can pull over 500Mh/s on a rx580, which is the best miner I found does)

[VasilyS]

Well, Mr Andrucrypt, you've got work to do again since the release of CryptoDredge... There's approx 100% performance to be gained to be about on par with Pascal cards (at least for Vegas that is)... Come on, enough xmas turkey for you, get back to work!

No more plans for MTP this year Probably only fee lowering to default scheme and release with x16rt support.

I'm waiting for new releases of your miner. MTP is very profitable at the moment, but there is no good miner for AMD cards that can be compared with CryptoDredge for Nvidia.

[fluxy12]

What is the hashrate for MTP on a RX580 ?

[dragonmike]

Well, Mr Andrucrypt, you've got work to do again since the release of CryptoDredge... There's approx 100% performance to be gained to be about on par with Pascal cards (at least for Vegas that is)... Come on, enough xmas turkey for you, get back to work!

No more plans for MTP this year Probably only fee lowering to default scheme and release with x16rt support.

That's perfectly fair.
Out of interest, do you believe there is more potential for AMD on MTP to come anywhere close to Dredge/krnlx's nvidia variants? Something tells me that with that power draw on MTP, we're unlikely to see anything earth-shattering from AMD for this algo at all.

[andrucrypt]

Well, Mr Andrucrypt, you've got work to do again since the release of CryptoDredge... There's approx 100% performance to be gained to be about on par with Pascal cards (at least for Vegas that is)... Come on, enough xmas turkey for you, get back to work!

No more plans for MTP this year Probably only fee lowering to default scheme and release with x16rt support.

That's perfectly fair.
Out of interest, do you believe there is more potential for AMD on MTP to come anywhere close to Dredge/krnlx's nvidia variants? Something tells me that with that power draw on MTP, we're unlikely to see anything earth-shattering from AMD for this algo at all.

I guess no. Using only OpenCL won't improve the speed, so next year probably I will start learning GCN ASM