WildRig Multi 0.40.9 multi-algo miner with low dev-fee (AMD/NVIDIA/INTEL)

[andrucrypt]

Hey guys, trying to get 6 Vega64s to run stable. At this point after 10 minutes one or two gpu's dies, and the rig freezes.
Looking for a stable bat file for startup. Speed isn't an issue at the moment, just want to keep it running.
Any help appreciated! Thanks!

Check your voltage for core, if you use modification for cryptonight mining - it won't work on almost all other algorithms here. So try to test on one GPU first, starting from stock voltage and decrease it step by step finding the lowest stable value.

[unsivilaudio]

Just fyi, easier ethos installation is here. Full integration.

https://github.com/cynixx3/third-party-miner-installer-for-ethos

[andrucrypt]

Just fyi, easier ethos installation is here. Full integration.

https://github.com/cynixx3/third-party-miner-installer-for-ethos

Thanks! Will add this link into OP

[melt7777]

Hey andrucrypt Thanks again for the latest round of updates. The wildrig-multi is running fast and very stable on PiMP OS. We have it fully integrated, so all the miner must do is set their pool and wallet and go. Keep up the great work! and thanks again for the solid API so we can get the stats for miner.farm. See you in the wildrig discord!

~ melt
getpimp.org | miner.farm

[hashit2passit]

Add lyra2zz algo please.

[andrucrypt]

WARNING:
If you were using some Grin miner, you will get system freeze using WildRig. That miner changes driver behavior, because of recommendation to use command setx GPU_MAX_WORKGROUP_SIZE 1024. So if you get freezes, now you need to specify worksize precisely. Like --opencl-launch 20x256 instead of --opencl-launch 20x0.

[powerstr]

http://prntscr.com/m8rb0r

[nanona]

WARNING:
If you were using some Grin miner, you will get system freeze using WildRig. That miner changes driver behavior, because of recommendation to use command setx GPU_MAX_WORKGROUP_SIZE 1024. So if you get freezes, now you need to specify worksize precisely. Like --opencl-launch 20x256 instead of --opencl-launch 20x0.

I never understood why most mining software comes with "setx" in the sample batch file. This is wrong and dangerous. The command "set" is what should be used.

set modifies the current shell's (the window's) environment values, and the change is available immediately, but it is temporary. The change will not affect other shells that are running, and as soon as you close the shell, the new value is lost until such time as you run set again.

setx modifies the value permanently, which affects all future shells, but does not modify the environment of the shells already running. You have to exit the shell and reopen it before the change will be available, but the value will remain modified until you change it again.

[dragonmike]

WARNING:
If you were using some Grin miner, you will get system freeze using WildRig. That miner changes driver behavior, because of recommendation to use command setx GPU_MAX_WORKGROUP_SIZE 1024. So if you get freezes, now you need to specify worksize precisely. Like --opencl-launch 20x256 instead of --opencl-launch 20x0.

Well there you go then, it's exactly what I experienced the other day when I wrote it to you in the Discord. Glad you found out what actually happened.
I originally thought it had something to do with the .net runtime.

What is the "regular" max workgroup size in Windows then, assuming the variable would never be forced/set by the Grin miner?

[VasilyS]

Finally, I achieved to launch your miner on hmq1725 algo. It is possible with your latest version 0.15.1. Thank you for your work!

[4ward]

Something is wrong with Astralhash (0.15.1.3)

Zergpool:

Code:

[15:15:29] new job from astralhash.mine.zergpool.com:8640 diff 16.78M
[15:15:29] rejected(0/1) diff 16.78M "Invalid share" GPU#0 (99 ms)
[15:15:29] rejected(0/2) diff 16.78M "Invalid share" GPU#0 (100 ms)
[15:15:30] rejected(0/3) diff 16.78M "Invalid share" GPU#0 (100 ms)
[15:15:33] rejected(0/4) diff 16.78M "Invalid share" GPU#0 (399 ms)

GltMiner:

Code:

[15:16:33] use pool fra.gltminer.com:50001 80.240.29.156
[15:16:36] rejected(0/1) diff 268.44M "low difficulty share of 7.615351028059327e-8" GPU#0 (32 ms)
[15:17:16] rejected(0/2) diff 268.44M "low difficulty share of 2.6222327381709165e-7" GPU#0 (31 ms)

p.s.
0.14 was fine

[john1010]

I am using the v 0.15 but i got the waiting connection notification even i changed the pool that i am using, my config is the same with my other rig which i got no problem, i only got this waiting connection problem in my another rig, I checked everything, I don't missed something, but still I got the error of connection.

[andrucrypt]

Something is wrong with Astralhash (0.15.1.3)

Zergpool:

Code:

[15:15:29] new job from astralhash.mine.zergpool.com:8640 diff 16.78M
[15:15:29] rejected(0/1) diff 16.78M "Invalid share" GPU#0 (99 ms)
[15:15:29] rejected(0/2) diff 16.78M "Invalid share" GPU#0 (100 ms)
[15:15:30] rejected(0/3) diff 16.78M "Invalid share" GPU#0 (100 ms)
[15:15:33] rejected(0/4) diff 16.78M "Invalid share" GPU#0 (399 ms)

GltMiner:

Code:

[15:16:33] use pool fra.gltminer.com:50001 80.240.29.156
[15:16:36] rejected(0/1) diff 268.44M "low difficulty share of 7.615351028059327e-8" GPU#0 (32 ms)
[15:17:16] rejected(0/2) diff 268.44M "low difficulty share of 2.6222327381709165e-7" GPU#0 (31 ms)

p.s.
0.14 was fine

Yeah, something is broken there. But fixed in current development version, so next release will fix that, thanks for info.

[andrucrypt]

I am using the v 0.15 but i got the waiting connection notification even i changed the pool that i am using, my config is the same with my other rig which i got no problem, i only got this waiting connection problem in my another rig, I checked everything, I don't missed something, but still I got the error of connection.

Wi-Fi?

[mrpenta]

hi guys
I cant run miner for mtp algo in hiveos.whats the problem?



[00:34:57] HTTP Daemon failed to start
[00:34:57] strategy: 0
[00:34:57] send-stale: no
[00:34:57] watchdog: disabled
[00:34:57] good-risers: default
[00:34:57] compiling code and initializing GPUs. This will take a while...
[00:34:57] GPU #0 [BusID: #3] [gfx900] Radeon RX Vega
[00:34:57] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #1 [BusID: #8] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #2 [BusID: #11] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #3 [BusID: #14] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #4 [BusID: #17] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:35:00] use pool xzc.f2pool.com:5780 47.92.184.84
[00:35:00] Stratum set target 0x00000020 0x00000000
[00:35:00] new job from xzc.f2pool.com:5780 diff 134.22M
[00:35:00] CPU: hashing inputs, allocating memory, filling first blocks

wildrig-multi exited, waiting to cooldown a bit

[alucard20724]

hi guys
I cant run miner for mtp algo in hiveos.whats the problem?



[00:34:57] HTTP Daemon failed to start
[00:34:57] strategy: 0
[00:34:57] send-stale: no
[00:34:57] watchdog: disabled
[00:34:57] good-risers: default
[00:34:57] compiling code and initializing GPUs. This will take a while...
[00:34:57] GPU #0 [BusID: #3] [gfx900] Radeon RX Vega
[00:34:57] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #1 [BusID: #8] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #2 [BusID: #11] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #3 [BusID: #14] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #4 [BusID: #17] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:35:00] use pool xzc.f2pool.com:5780 47.92.184.84
[00:35:00] Stratum set target 0x00000020 0x00000000
[00:35:00] new job from xzc.f2pool.com:5780 diff 134.22M
[00:35:00] CPU: hashing inputs, allocating memory, filling first blocks

wildrig-multi exited, waiting to cooldown a bit

waiting to cooldown a bit

looks like your cards are over thermal threshold.   have you gone to the hiveos forum?

[andrucrypt]

hi guys
I cant run miner for mtp algo in hiveos.whats the problem?



[00:34:57] HTTP Daemon failed to start
[00:34:57] strategy: 0
[00:34:57] send-stale: no
[00:34:57] watchdog: disabled
[00:34:57] good-risers: default
[00:34:57] compiling code and initializing GPUs. This will take a while...
[00:34:57] GPU #0 [BusID: #3] [gfx900] Radeon RX Vega
[00:34:57] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #1 [BusID: #8] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #2 [BusID: #11] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #3 [BusID: #14] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #4 [BusID: #17] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:35:00] use pool xzc.f2pool.com:5780 47.92.184.84
[00:35:00] Stratum set target 0x00000020 0x00000000
[00:35:00] new job from xzc.f2pool.com:5780 diff 134.22M
[00:35:00] CPU: hashing inputs, allocating memory, filling first blocks

wildrig-multi exited, waiting to cooldown a bit

Probably you have less than 8Gb of RAM, or CPU is weak

[prominertools]

Wildrig Multi has been added to the PMT mirror: https://prominertools.com/wildrig-multi/

[huntingthesnark]

SMoS Wildrig just crashes before it finishes setup for me. Says it might be too much overclock, but I've set everything to stock, removed all powersaving.

--opencl-threads 1 --opencl-launch 16x0 Is this the correct starting point for MTP? It's unfortunate that the detailed setup on the first page of this thread doesn't include MTP...

hi guys
I cant run miner for mtp algo in hiveos.whats the problem?



[00:34:57] HTTP Daemon failed to start
[00:34:57] strategy: 0
[00:34:57] send-stale: no
[00:34:57] watchdog: disabled
[00:34:57] good-risers: default
[00:34:57] compiling code and initializing GPUs. This will take a while...
[00:34:57] GPU #0 [BusID: #3] [gfx900] Radeon RX Vega
[00:34:57] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #1 [BusID: #8] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #2 [BusID: #11] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #3 [BusID: #14] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:34:58] GPU #4 [BusID: #17] [gfx900] Radeon RX Vega
[00:34:58] threads: 1, intensity: 18, worksize: 0/256, cu: 64, mem: 8176Mb
[00:35:00] use pool xzc.f2pool.com:5780 47.92.184.84
[00:35:00] Stratum set target 0x00000020 0x00000000
[00:35:00] new job from xzc.f2pool.com:5780 diff 134.22M
[00:35:00] CPU: hashing inputs, allocating memory, filling first blocks

wildrig-multi exited, waiting to cooldown a bit

Probably you have less than 8Gb of RAM, or CPU is weak

[andrucrypt]

SMoS Wildrig just crashes before it finishes setup for me. Says it might be too much overclock, but I've set everything to stock, removed all powersaving.

--opencl-threads 1 --opencl-launch 16x0 Is this the correct starting point for MTP? It's unfortunate that the detailed setup on the first page of this thread doesn't include MTP...

As I wrote - rig should have 8Gb of RAM and decent CPU for mining ZCoin. But even so, Vega cards currently shows same hashrate as RX580, so not worth a try. This algorithm need improvements, but no plans for working on it in next week or two.