mrschyguy
Newbie
Offline
Activity: 4
Merit: 0
|
|
October 11, 2020, 08:57:01 PM |
|
@andrucrypt Hello, just wanted to thank you for your amazing work. Have been using it for x11k. Was wondering if there are plans to optimize nvida or 5700xt cards for x11k? Thank you again for your hard work. Our community greatly appreciates it.
|
|
|
|
andrucrypt (OP)
Member
Offline
Activity: 720
Merit: 49
|
|
October 12, 2020, 04:10:31 PM |
|
@andrucrypt Hello, just wanted to thank you for your amazing work. Have been using it for x11k. Was wondering if there are plans to optimize nvida or 5700xt cards for x11k? Thank you again for your hard work. Our community greatly appreciates it.
Hi, I have no plans for optimizations for this kind of algorithms(all that x-family). A lot of hashfunctions are involved here, and they are not popular, so... Better to work on some new algorithms/etc. But if I have some time or an easy idea of optimization - I will do that
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
October 14, 2020, 09:20:27 AM |
|
errors: [11:19:22] GPU #0: GeForce RTX 3080 [busID: 2] [arch: sm86] [11:19:22] threads: 1, intensity: 19, worksize: 64/1024, cu: 68, mem: 10018Mb [11:19:24] use pool x25x.eu.mine.zergpool.com:3225 51.210.180.98 [11:19:24] Stratum set raw difficulty to 0.0800 [11:19:24] new job from x25x.eu.mine.zergpool.com:3225 diff 343.60M [11:19:24] block: 1,090,847 job target: 0x0000000c7ff37fff [11:19:24] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64' [11:19:26] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64' [11:19:28] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64' [11:19:30] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64' [11:19:32] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64'
Error: [11:16:44] initializing GPUs... [11:16:45] NVIDIA(sm86) not fully optimized yet for chosen algorithm [11:16:45] GPU #0: GeForce RTX 3080 [busID: 2] [arch: sm86] [11:16:45] threads: 1, intensity: 19, worksize: 64/1024, cu: 68, mem: 10018Mb [11:16:46] use pool xevan.eu.mine.zergpool.com:3739 51.210.180.98 [11:16:46] Stratum set raw difficulty to 12.0000 [11:16:46] new job from xevan.eu.mine.zergpool.com:3739 diff 201.33M [11:16:46] block: 860,381 job target: 0x0000001555400000 [11:16:46] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'bmw_512_128_volatile', argument 3 [11:16:47] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'groestl_512_128', argument 3 [11:16:48] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'skein_512_128', argument 3 [11:16:49] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'jh_512_128', argument 3 [11:16:50] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'keccak_512_128', argument 3 [11:16:51] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'luffa_512_128', argument 3 [11:16:52] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'cubehash_512_128', argument 3 [11:16:53] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'shavite_512_128', argument 3
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
October 14, 2020, 09:22:59 AM |
|
Error: [11:21:15] NVIDIA(sm86) not fully optimized yet for chosen algorithm [11:21:15] GPU #0: GeForce RTX 3080 [busID: 2] [arch: sm86] [11:21:15] threads: 1, intensity: 19, worksize: 64/1024, cu: 68, mem: 10018Mb [11:21:16] use pool megabtx.eu.mine.zergpool.com:3557 51.210.180.98 [11:21:16] Stratum set raw difficulty to 16.0000 [11:21:16] new job from megabtx.eu.mine.zergpool.com:3557 diff 268.44M [11:21:16] block: 686,196 job target: 0x0000000ffff00000 [11:21:24] rejected(0/1) diff 2.11G GPU#0 (258 ms) [11:21:24] reason: Invalid share [11:21:29] new job from megabtx.eu.mine.zergpool.com:3557 diff 268.44M [11:21:29] block: 686,196 job target: 0x0000000ffff00000 [11:22:03] rejected(0/2) diff 509.95M GPU#0 (423 ms) [11:22:03] reason: Invalid share [11:22:11] rejected(0/3) diff 465.45M GPU#0 (514 ms) [11:22:11] reason: Invalid share [11:22:14] Uptime: 0 days 00:00:59 [11:22:14] hashrate: 10s: 8870 60s: n/a 15m: n/a kH/s max: 8925 kH/s
All Megabtc Rejects...
|
|
|
|
andrucrypt (OP)
Member
Offline
Activity: 720
Merit: 49
|
|
October 14, 2020, 01:22:19 PM |
|
errors: [11:19:22] GPU #0: GeForce RTX 3080 [busID: 2] [arch: sm86] [11:19:22] threads: 1, intensity: 19, worksize: 64/1024, cu: 68, mem: 10018Mb [11:19:24] use pool x25x.eu.mine.zergpool.com:3225 51.210.180.98 [11:19:24] Stratum set raw difficulty to 0.0800 [11:19:24] new job from x25x.eu.mine.zergpool.com:3225 diff 343.60M [11:19:24] block: 1,090,847 job target: 0x0000000c7ff37fff [11:19:24] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64' [11:19:26] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64' [11:19:28] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64' [11:19:30] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64' [11:19:32] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64'
Error: [11:16:44] initializing GPUs... [11:16:45] NVIDIA(sm86) not fully optimized yet for chosen algorithm [11:16:45] GPU #0: GeForce RTX 3080 [busID: 2] [arch: sm86] [11:16:45] threads: 1, intensity: 19, worksize: 64/1024, cu: 68, mem: 10018Mb [11:16:46] use pool xevan.eu.mine.zergpool.com:3739 51.210.180.98 [11:16:46] Stratum set raw difficulty to 12.0000 [11:16:46] new job from xevan.eu.mine.zergpool.com:3739 diff 201.33M [11:16:46] block: 860,381 job target: 0x0000001555400000 [11:16:46] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'bmw_512_128_volatile', argument 3 [11:16:47] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'groestl_512_128', argument 3 [11:16:48] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'skein_512_128', argument 3 [11:16:49] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'jh_512_128', argument 3 [11:16:50] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'keccak_512_128', argument 3 [11:16:51] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'luffa_512_128', argument 3 [11:16:52] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'cubehash_512_128', argument 3 [11:16:53] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'shavite_512_128', argument 3
Error: [11:21:15] NVIDIA(sm86) not fully optimized yet for chosen algorithm [11:21:15] GPU #0: GeForce RTX 3080 [busID: 2] [arch: sm86] [11:21:15] threads: 1, intensity: 19, worksize: 64/1024, cu: 68, mem: 10018Mb [11:21:16] use pool megabtx.eu.mine.zergpool.com:3557 51.210.180.98 [11:21:16] Stratum set raw difficulty to 16.0000 [11:21:16] new job from megabtx.eu.mine.zergpool.com:3557 diff 268.44M [11:21:16] block: 686,196 job target: 0x0000000ffff00000 [11:21:24] rejected(0/1) diff 2.11G GPU#0 (258 ms) [11:21:24] reason: Invalid share [11:21:29] new job from megabtx.eu.mine.zergpool.com:3557 diff 268.44M [11:21:29] block: 686,196 job target: 0x0000000ffff00000 [11:22:03] rejected(0/2) diff 509.95M GPU#0 (423 ms) [11:22:03] reason: Invalid share [11:22:11] rejected(0/3) diff 465.45M GPU#0 (514 ms) [11:22:11] reason: Invalid share [11:22:14] Uptime: 0 days 00:00:59 [11:22:14] hashrate: 10s: 8870 60s: n/a 15m: n/a kH/s max: 8925 kH/s
All Megabtc Rejects...
This is known issue(and mentioned in first message), not all algorithms are working properly on NVIDIA gpu's. But thanks, I will check those errors in next release. What about megabtx, this one is strange, did you choose megabtx algorithm? Probably they broke backward compatibility, since on previous generations same kernels are working fine. If so, I will try to recompile them specifically for sm86 arch.
|
|
|
|
andrucrypt (OP)
Member
Offline
Activity: 720
Merit: 49
|
|
October 16, 2020, 03:26:46 PM |
|
0.28.1 beta - updated progpow-veil for started testnet - lowered devfee on megabtx and megamec to default 1%
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
October 16, 2020, 04:32:17 PM |
|
errors: [11:19:22] GPU #0: GeForce RTX 3080 [busID: 2] [arch: sm86] [11:19:22] threads: 1, intensity: 19, worksize: 64/1024, cu: 68, mem: 10018Mb [11:19:24] use pool x25x.eu.mine.zergpool.com:3225 51.210.180.98 [11:19:24] Stratum set raw difficulty to 0.0800 [11:19:24] new job from x25x.eu.mine.zergpool.com:3225 diff 343.60M [11:19:24] block: 1,090,847 job target: 0x0000000c7ff37fff [11:19:24] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64' [11:19:26] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64' [11:19:28] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64' [11:19:30] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64' [11:19:32] Error CL_INVALID_KERNEL_ARGS when calling clEnqueueNDRangeKernel for kernel 'swift_64'
Error: [11:16:44] initializing GPUs... [11:16:45] NVIDIA(sm86) not fully optimized yet for chosen algorithm [11:16:45] GPU #0: GeForce RTX 3080 [busID: 2] [arch: sm86] [11:16:45] threads: 1, intensity: 19, worksize: 64/1024, cu: 68, mem: 10018Mb [11:16:46] use pool xevan.eu.mine.zergpool.com:3739 51.210.180.98 [11:16:46] Stratum set raw difficulty to 12.0000 [11:16:46] new job from xevan.eu.mine.zergpool.com:3739 diff 201.33M [11:16:46] block: 860,381 job target: 0x0000001555400000 [11:16:46] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'bmw_512_128_volatile', argument 3 [11:16:47] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'groestl_512_128', argument 3 [11:16:48] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'skein_512_128', argument 3 [11:16:49] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'jh_512_128', argument 3 [11:16:50] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'keccak_512_128', argument 3 [11:16:51] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'luffa_512_128', argument 3 [11:16:52] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'cubehash_512_128', argument 3 [11:16:53] Error CL_INVALID_ARG_INDEX when calling clSetKernelArg for kernel 'shavite_512_128', argument 3
Error: [11:21:15] NVIDIA(sm86) not fully optimized yet for chosen algorithm [11:21:15] GPU #0: GeForce RTX 3080 [busID: 2] [arch: sm86] [11:21:15] threads: 1, intensity: 19, worksize: 64/1024, cu: 68, mem: 10018Mb [11:21:16] use pool megabtx.eu.mine.zergpool.com:3557 51.210.180.98 [11:21:16] Stratum set raw difficulty to 16.0000 [11:21:16] new job from megabtx.eu.mine.zergpool.com:3557 diff 268.44M [11:21:16] block: 686,196 job target: 0x0000000ffff00000 [11:21:24] rejected(0/1) diff 2.11G GPU#0 (258 ms) [11:21:24] reason: Invalid share [11:21:29] new job from megabtx.eu.mine.zergpool.com:3557 diff 268.44M [11:21:29] block: 686,196 job target: 0x0000000ffff00000 [11:22:03] rejected(0/2) diff 509.95M GPU#0 (423 ms) [11:22:03] reason: Invalid share [11:22:11] rejected(0/3) diff 465.45M GPU#0 (514 ms) [11:22:11] reason: Invalid share [11:22:14] Uptime: 0 days 00:00:59 [11:22:14] hashrate: 10s: 8870 60s: n/a 15m: n/a kH/s max: 8925 kH/s
All Megabtc Rejects...
This is known issue(and mentioned in first message), not all algorithms are working properly on NVIDIA gpu's. But thanks, I will check those errors in next release. What about megabtx, this one is strange, did you choose megabtx algorithm? Probably they broke backward compatibility, since on previous generations same kernels are working fine. If so, I will try to recompile them specifically for sm86 arch. Many thanks I will try it as soon is in HiveOS...
|
|
|
|
Wolfie
|
|
November 08, 2020, 05:57:04 AM |
|
0.28.1 beta - updated progpow-veil for started testnet - lowered devfee on megabtx and megamec to default 1%
Hey there Boss thx a lot very nice job. Would you be so kind as to look into adding support for ProgPow-Epic , $EPIC = Epic Cash, 3 algo MW coin, 21mill supply, great little project With all the 4GB cards available, we need some decent work for them. Here is their GitLab link : https://gitlab.com/epiccashSRBminer already supports them RandomX\CPU, TTminer already support them on ProgPOW\nVidia thx in advance for anything you can do Wink
|
@XVG_HypeMan
|
|
|
dagere76
Newbie
Offline
Activity: 7
Merit: 0
|
|
November 16, 2020, 03:23:01 PM |
|
am on the latest version 28.1 beta with AMD 470, I have 4 of them. I start the miner and my hashrate is showing n/a on all 4 video cards and they are doing nothing. MY GPU's are in compute mode and they mine ETH fine with Pheonix. When I try to install Microsoft Visual 64 it will not install because it says that I have a newer version already installed. Could this possibly be the problem. Here is my script to start minus the wallet address and I have gave the EXE admin privileges;
wildrig.exe --print-full --algo progpow-veil --opencl-threads auto --opencl-launch auto --url veil.us.woolypooly.com:3098 --user WalletAddress.dagereGPU --pass x
Anythouts why they will not compute...I see no errors
|
|
|
|
andrucrypt (OP)
Member
Offline
Activity: 720
Merit: 49
|
|
November 16, 2020, 03:52:33 PM |
|
am on the latest version 28.1 beta with AMD 470, I have 4 of them. I start the miner and my hashrate is showing n/a on all 4 video cards and they are doing nothing. MY GPU's are in compute mode and they mine ETH fine with Pheonix. When I try to install Microsoft Visual 64 it will not install because it says that I have a newer version already installed. Could this possibly be the problem. Here is my script to start minus the wallet address and I have gave the EXE admin privileges;
wildrig.exe --print-full --algo progpow-veil --opencl-threads auto --opencl-launch auto --url veil.us.woolypooly.com:3098 --user WalletAddress.dagereGPU --pass x
Anythouts why they will not compute...I see no errors
Try --user WalletAddress without specifying a rig name, since I guess you don't even get any "new job" message in miner?
|
|
|
|
dagere76
Newbie
Offline
Activity: 7
Merit: 0
|
|
November 16, 2020, 06:16:01 PM |
|
am on the latest version 28.1 beta with AMD 470, I have 4 of them. I start the miner and my hashrate is showing n/a on all 4 video cards and they are doing nothing. MY GPU's are in compute mode and they mine ETH fine with Pheonix. When I try to install Microsoft Visual 64 it will not install because it says that I have a newer version already installed. Could this possibly be the problem. Here is my script to start minus the wallet address and I have gave the EXE admin privileges;
wildrig.exe --print-full --algo progpow-veil --opencl-threads auto --opencl-launch auto --url veil.us.woolypooly.com:3098 --user WalletAddress.dagereGPU --pass x
Anythouts why they will not compute...I see no errors
Try --user WalletAddress without specifying a rig name, since I guess you don't even get any "new job" message in miner? Did what you said and still the same * VERSIONS: WildRig/0.28.1 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015 * CPU: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz * ALGO: progpow-veil * POOL #1: veil.us.woolypooly.com:3098 * COMMANDS: hashrate, statistics, pause, resume [12:11:06] donation: 1% [12:11:06] send-stale: no [12:11:06] watchdog: disabled [12:11:06] temp limits: 60C..85C [12:11:06] initializing GPUs... [12:11:06] GPU #0: Radeon (TM) RX 470 Graphics [busID: 1] [arch: ellesmere] [12:11:06] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 8192Mb [12:11:07] GPU #1: Radeon (TM) RX 470 Graphics [busID: 3] [arch: ellesmere] [12:11:07] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 8192Mb [12:11:08] GPU #2: Radeon (TM) RX 470 Graphics [busID: 8] [arch: ellesmere] [12:11:08] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 8192Mb [12:11:08] GPU #3: Radeon (TM) RX 470 Graphics [busID: 9] [arch: ellesmere] [12:11:08] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 8192Mb [12:11:55] Uptime: 0 days 00:00:49 [12:11:55] GPU #0[T:40C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:11:55] GPU #1[T:39C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:11:55] GPU #2[T:38C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:11:55] GPU #3[T:33C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:11:55] hashrate: 10s: n/a 60s: n/a 15m: n/a kH/s max: n/a kH/s [12:12:05] Uptime: 0 days 00:00:59 [12:12:05] GPU #0[T:39C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:12:05] GPU #1[T:37C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:12:05] GPU #2[T:37C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:12:05] GPU #3[T:32C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:12:05] hashrate: 10s: n/a 60s: n/a 15m: n/a kH/s max: n/a kH/s [12:13:05] Uptime: 0 days 00:01:59 [12:13:05] GPU #0[T:35C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:13:05] GPU #1[T:33C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:13:05] GPU #2[T:32C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:13:05] GPU #3[T:28C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:13:05] hashrate: 10s: n/a 60s: n/a 15m: n/a kH/s max: n/a kH/s [12:14:05] Uptime: 0 days 00:02:59 [12:14:05] GPU #0[T:32C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:14:05] GPU #1[T:30C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:14:05] GPU #2[T:29C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:14:05] GPU #3[T:26C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:14:05] hashrate: 10s: n/a 60s: n/a 15m: n/a kH/s max: n/a kH/s
|
|
|
|
andrucrypt (OP)
Member
Offline
Activity: 720
Merit: 49
|
|
November 17, 2020, 10:10:04 AM |
|
am on the latest version 28.1 beta with AMD 470, I have 4 of them. I start the miner and my hashrate is showing n/a on all 4 video cards and they are doing nothing. MY GPU's are in compute mode and they mine ETH fine with Pheonix. When I try to install Microsoft Visual 64 it will not install because it says that I have a newer version already installed. Could this possibly be the problem. Here is my script to start minus the wallet address and I have gave the EXE admin privileges;
wildrig.exe --print-full --algo progpow-veil --opencl-threads auto --opencl-launch auto --url veil.us.woolypooly.com:3098 --user WalletAddress.dagereGPU --pass x
Anythouts why they will not compute...I see no errors
Try --user WalletAddress without specifying a rig name, since I guess you don't even get any "new job" message in miner? Did what you said and still the same * VERSIONS: WildRig/0.28.1 beta libuv/1.21.0 OpenCL/2.0 MSVC/2015 * CPU: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz * ALGO: progpow-veil * POOL #1: veil.us.woolypooly.com:3098 * COMMANDS: hashrate, statistics, pause, resume [12:11:06] donation: 1% [12:11:06] send-stale: no [12:11:06] watchdog: disabled [12:11:06] temp limits: 60C..85C [12:11:06] initializing GPUs... [12:11:06] GPU #0: Radeon (TM) RX 470 Graphics [busID: 1] [arch: ellesmere] [12:11:06] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 8192Mb [12:11:07] GPU #1: Radeon (TM) RX 470 Graphics [busID: 3] [arch: ellesmere] [12:11:07] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 8192Mb [12:11:08] GPU #2: Radeon (TM) RX 470 Graphics [busID: 8] [arch: ellesmere] [12:11:08] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 8192Mb [12:11:08] GPU #3: Radeon (TM) RX 470 Graphics [busID: 9] [arch: ellesmere] [12:11:08] threads: 1, intensity: 23, worksize: 0/256, cu: 32, mem: 8192Mb [12:11:55] Uptime: 0 days 00:00:49 [12:11:55] GPU #0[T:40C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:11:55] GPU #1[T:39C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:11:55] GPU #2[T:38C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:11:55] GPU #3[T:33C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:11:55] hashrate: 10s: n/a 60s: n/a 15m: n/a kH/s max: n/a kH/s [12:12:05] Uptime: 0 days 00:00:59 [12:12:05] GPU #0[T:39C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:12:05] GPU #1[T:37C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:12:05] GPU #2[T:37C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:12:05] GPU #3[T:32C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:12:05] hashrate: 10s: n/a 60s: n/a 15m: n/a kH/s max: n/a kH/s [12:13:05] Uptime: 0 days 00:01:59 [12:13:05] GPU #0[T:35C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:13:05] GPU #1[T:33C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:13:05] GPU #2[T:32C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:13:05] GPU #3[T:28C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:13:05] hashrate: 10s: n/a 60s: n/a 15m: n/a kH/s max: n/a kH/s [12:14:05] Uptime: 0 days 00:02:59 [12:14:05] GPU #0[T:32C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:14:05] GPU #1[T:30C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:14:05] GPU #2[T:29C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:14:05] GPU #3[T:26C F:33%]: 10s: n/a 60s: n/a 15m: n/a kH/s [12:14:05] hashrate: 10s: n/a 60s: n/a 15m: n/a kH/s max: n/a kH/s
Can you try with --print-debug? Looks like pool rejects connection for some reason.
|
|
|
|
Bathmat
Jr. Member
Offline
Activity: 78
Merit: 3
|
|
November 17, 2020, 01:38:54 PM |
|
am on the latest version 28.1 beta with AMD 470, I have 4 of them. I start the miner and my hashrate is showing n/a on all 4 video cards and they are doing nothing. MY GPU's are in compute mode and they mine ETH fine with Pheonix. When I try to install Microsoft Visual 64 it will not install because it says that I have a newer version already installed. Could this possibly be the problem. Here is my script to start minus the wallet address and I have gave the EXE admin privileges;
wildrig.exe --print-full --algo progpow-veil --opencl-threads auto --opencl-launch auto --url veil.us.woolypooly.com:3098 --user WalletAddress.dagereGPU --pass x
Anythouts why they will not compute...I see no errors
Try --user WalletAddress without specifying a rig name, since I guess you don't even get any "new job" message in miner? Did what you said and still the same Did you use a basecoin address (starts with "bv") and not a stealth address (starts with "sv")? https://woolypooly.medium.com/how-to-mine-veil-full-mining-guide-6d8a72914377P.S. How to get basecoin address starts with bv? Go to wallet console and type this command: getnewbasecoinaddress EDIT: I'm assuming the 470s are 4GB? I think the DAG for Veil is over 4GB, so you need 6 or 8GB GPUs for it.
|
|
|
|
dagere76
Newbie
Offline
Activity: 7
Merit: 0
|
|
November 18, 2020, 04:56:53 PM Last edit: November 18, 2020, 05:19:09 PM by dagere76 |
|
am on the latest version 28.1 beta with AMD 470, I have 4 of them. I start the miner and my hashrate is showing n/a on all 4 video cards and they are doing nothing. MY GPU's are in compute mode and they mine ETH fine with Pheonix. When I try to install Microsoft Visual 64 it will not install because it says that I have a newer version already installed. Could this possibly be the problem. Here is my script to start minus the wallet address and I have gave the EXE admin privileges;
wildrig.exe --print-full --algo progpow-veil --opencl-threads auto --opencl-launch auto --url veil.us.woolypooly.com:3098 --user WalletAddress.dagereGPU --pass x
Anythouts why they will not compute...I see no errors
Try --user WalletAddress without specifying a rig name, since I guess you don't even get any "new job" message in miner? Did what you said and still the same Did you use a basecoin address (starts with "bv") and not a stealth address (starts with "sv")? https://woolypooly.medium.com/how-to-mine-veil-full-mining-guide-6d8a72914377P.S. How to get basecoin address starts with bv? Go to wallet console and type this command: getnewbasecoinaddress EDIT: I'm assuming the 470s are 4GB? I think the DAG for Veil is over 4GB, so you need 6 or 8GB GPUs for it. Actually I do have the 8gb 470's but I did not use the BV address I used the SV, have never ran into that before. I will try that and get back to you. Thanks *UPDATE* That fixed it! I saw there was a new mining address also, used that one to try and works fine. I guess that I should have researched the coin more before mining. I am assuming the different addresses pertain to privacy. Anyways thanks again..
|
|
|
|
melloyellow
|
|
December 08, 2020, 04:36:47 PM |
|
I'm not able to mine raven with the default settings at auto nor others
wildrig.exe --print-full --algo kawpow --url stratum+tcp://rvn.woolypooly.com:55555 --worker test --user RJjr1sMM2uVsiBpUN86vgbs3JnkPzwfWFD --pass x --opencl-threads auto --opencl-launch auto
I've tried 1 and 2 threads, lowered intensity from 23 to 18. I just get crashes. Any ideas?
|
|
|
|
andrucrypt (OP)
Member
Offline
Activity: 720
Merit: 49
|
|
December 08, 2020, 06:58:55 PM |
|
I'm not able to mine raven with the default settings at auto nor others
wildrig.exe --print-full --algo kawpow --url stratum+tcp://rvn.woolypooly.com:55555 --worker test --user RJjr1sMM2uVsiBpUN86vgbs3JnkPzwfWFD --pass x --opencl-threads auto --opencl-launch auto
I've tried 1 and 2 threads, lowered intensity from 23 to 18. I just get crashes. Any ideas?
what's your error? What gpu's are you using?
|
|
|
|
melloyellow
|
|
December 09, 2020, 06:38:35 PM |
|
I'm not able to mine raven with the default settings at auto nor others
wildrig.exe --print-full --algo kawpow --url stratum+tcp://rvn.woolypooly.com:55555 --worker test --user RJjr1sMM2uVsiBpUN86vgbs3JnkPzwfWFD --pass x --opencl-threads auto --opencl-launch auto
I've tried 1 and 2 threads, lowered intensity from 23 to 18. I just get crashes. Any ideas?
what's your error? What gpu's are you using? There's no error in the console. It just goes blank and eventually the machine crashes. This is on one r9 390
|
|
|
|
andrucrypt (OP)
Member
Offline
Activity: 720
Merit: 49
|
|
December 09, 2020, 06:49:48 PM |
|
I'm not able to mine raven with the default settings at auto nor others
wildrig.exe --print-full --algo kawpow --url stratum+tcp://rvn.woolypooly.com:55555 --worker test --user RJjr1sMM2uVsiBpUN86vgbs3JnkPzwfWFD --pass x --opencl-threads auto --opencl-launch auto
I've tried 1 and 2 threads, lowered intensity from 23 to 18. I just get crashes. Any ideas?
what's your error? What gpu's are you using? There's no error in the console. It just goes blank and eventually the machine crashes. This is on one r9 390 what driver version are you using and what OC settings?
|
|
|
|
melloyellow
|
|
December 09, 2020, 09:50:17 PM |
|
I'm not able to mine raven with the default settings at auto nor others
wildrig.exe --print-full --algo kawpow --url stratum+tcp://rvn.woolypooly.com:55555 --worker test --user RJjr1sMM2uVsiBpUN86vgbs3JnkPzwfWFD --pass x --opencl-threads auto --opencl-launch auto
I've tried 1 and 2 threads, lowered intensity from 23 to 18. I just get crashes. Any ideas?
what's your error? What gpu's are you using? There's no error in the console. It just goes blank and eventually the machine crashes. This is on one r9 390 what driver version are you using and what OC settings? No overclock. It's running at 1040 clock and 1500 memory. I'm using 20.4.2
|
|
|
|
entryboy
Newbie
Offline
Activity: 44
Merit: 0
|
|
December 10, 2020, 08:56:09 PM |
|
Wild Rrig (0.28.1) makes at the moment with Firo (zcoin, MTP) just too many problems (low difficulty result). I am therefore on another engine. The hashrate is also ~20% worse compared to the competition (0.55 vs. 0.72 firo per day).
I use it with (2 x Radeon Vega LC, -18% Power, 1000 Mhz Ram, ~1320 MHz clock)
wildrig.exe --print-full --algo mtp --url stratum+tcp://xzc.2miners.com:8080 --user my_wallet_adress_is_not_for_all.1 --pass x --donate-level=1
Can you check this?
Thank you.
|
|
|
|
|