WildRig Multi 0.40.9 multi-algo miner with low dev-fee (AMD/NVIDIA/INTEL)

[Cosmopolitan]

Hi,

I am looking for the commands to use in WildRig miner in HiveOS.
I realized from the previous post that to enable certain GPUs mining, we can use -d 0,1,2,5.

Could someone please share the rest of the commands such as memory clock, core clock offset, power limit, fan etc?

without knowing what cards you have, that question can't be accurately answered.

but here's a start for you.

https://www.hashrate.no/

Thanks for this.

[andrucrypt]

WildRig Multi 0.36.1 beta
- added --execute-wait parameter
- new statistics table(also extended API)
- improved nexapow up to 10% depends on gpu
- implemented precompute for nexapow on gpu, so RAM requirements should decrease
- improved pufferfish2 for RDNA/RDNA2
- improved nist-family hashfuncs for RDNA/RDNA2(so there should be performance increase on x16-like algorithms, skydoge and so on)
- removed coin-specific algorithms that are dead already(0x10, exosis, geek, honeycomb, megamec, mtp, mtp-tcr, polytimos, renesis, sonoa, x17r, wildkeccak)

IMPORTANT: This version is still beta, so some algorithms may not work.

[andrucrypt]

WildRig Multi 0.36.2 beta
- improved nexapow up to 10-20% depends on GPU
- added parameter --execute-at-start(now --execute will work on nexapow after precompute stage)
- extended statistics table with total power consumption and efficiency per gpu

IMPORTANT: This version is still beta, so some algorithms may not work.

[llcoolj]

Hello.  I mining nexapow. I can't run the new miner WildRig Multi 0.36.2 on one of my machines. On the other machine I have no problem with WildRig Multi 0.36.2. Both machines have Windows 10 Pro and the same drivers with Nvidia RTX 30 series. With the old version WildRig Multi 0.36.1 both machines work correctly and have no problems.

[andrucrypt]

Hello.  I mining nexapow. I can't run the new miner WildRig Multi 0.36.2 on one of my machines. On the other machine I have no problem with WildRig Multi 0.36.2. Both machines have Windows 10 Pro and the same drivers with Nvidia RTX 30 series. With the old version WildRig Multi 0.36.1 both machines work correctly and have no problems.

Hi, you need Windows 10 build 2004+, any older version won't work because of how it allocates memory on gpu. Also you need around 9Gb of virtual memory per each gpu. New optimizations in 0.36.2 use almost whole memory on 8Gb gpu's.

[llcoolj]

Hello.  I mining nexapow. I can't run the new miner WildRig Multi 0.36.2 on one of my machines. On the other machine I have no problem with WildRig Multi 0.36.2. Both machines have Windows 10 Pro and the same drivers with Nvidia RTX 30 series. With the old version WildRig Multi 0.36.1 both machines work correctly and have no problems.

Hi, you need Windows 10 build 2004+, any older version won't work because of how it allocates memory on gpu. Also you need around 9Gb of virtual memory per each gpu. New optimizations in 0.36.2 use almost whole memory on 8Gb gpu's.

Hello. It is good to write this important information in the description of the new miner WildRig Multi 0.36.2 

[KpoJIuk]

Hi everyone,
I facing a problem.
I turn on WildRig via NEXA , after apx 1 hour the cmd show me  hashrate Nan/N and videocards stay on 0% working.
How can i solved this problem ?
Thanks for all

[andrucrypt]

Hi everyone,
I facing a problem.
I turn on WildRig via NEXA , after apx 1 hour the cmd show me  hashrate Nan/N and videocards stay on 0% working.
How can i solved this problem ?
Thanks for all

This is OC related problem, reduce your core OC. On AMD probably need to use higher core voltage.

[KpoJIuk]

Hi everyone,
I facing a problem.
I turn on WildRig via NEXA , after apx 1 hour the cmd show me  hashrate Nan/N and videocards stay on 0% working.
How can i solved this problem ?
Thanks for all

This is OC related problem, reduce your core OC. On AMD probably need to use higher core voltage.

Hi for fastly answer.
Nvidia 511.79 driver's ( before was newest  but also not working ).
I didnt use overclocking

[andrucrypt]

Hi everyone,
I facing a problem.
I turn on WildRig via NEXA , after apx 1 hour the cmd show me  hashrate Nan/N and videocards stay on 0% working.
How can i solved this problem ?
Thanks for all

This is OC related problem, reduce your core OC. On AMD probably need to use higher core voltage.

Hi for fastly answer.
Nvidia 511.79 driver's ( before was newest  but also not working ).
I didnt use overclocking

What exact cards then? Try to reduce intensity maybe, use -i 21 or even -i 20. Anyway, this is something to do with gpu's stability, no other reasons. Thousands of miners are mining just fine )

[KpoJIuk]

Hi everyone,
I facing a problem.
I turn on WildRig via NEXA , after apx 1 hour the cmd show me  hashrate Nan/N and videocards stay on 0% working.
How can i solved this problem ?
Thanks for all

This is OC related problem, reduce your core OC. On AMD probably need to use higher core voltage.

Hi for fastly answer.
Nvidia 511.79 driver's ( before was newest  but also not working ).
I didnt use overclocking

What exact cards then? Try to reduce intensity maybe, use -i 21 or even -i 20. Anyway, this is something to do with gpu's stability, no other reasons. Thousands of miners are mining just fine )

Its right ). 3060ti LHR palit's and 2060S

[andrucrypt]

Hi everyone,
I facing a problem.
I turn on WildRig via NEXA , after apx 1 hour the cmd show me  hashrate Nan/N and videocards stay on 0% working.
How can i solved this problem ?
Thanks for all

This is OC related problem, reduce your core OC. On AMD probably need to use higher core voltage.

Hi for fastly answer.
Nvidia 511.79 driver's ( before was newest  but also not working ).
I didnt use overclocking

What exact cards then? Try to reduce intensity maybe, use -i 21 or even -i 20. Anyway, this is something to do with gpu's stability, no other reasons. Thousands of miners are mining just fine )

Its right ). 3060ti LHR palit's and 2060S

Hm, have you tried the latest drivers that do LHR unlock? And does your cards in a mixed rig? Try to find failing cards with -d parameter if so

[KpoJIuk]

Hi everyone,
I facing a problem.
I turn on WildRig via NEXA , after apx 1 hour the cmd show me  hashrate Nan/N and videocards stay on 0% working.
How can i solved this problem ?
Thanks for all

This is OC related problem, reduce your core OC. On AMD probably need to use higher core voltage.

Hi for fastly answer.
Nvidia 511.79 driver's ( before was newest  but also not working ).
I didnt use overclocking

What exact cards then? Try to reduce intensity maybe, use -i 21 or even -i 20. Anyway, this is something to do with gpu's stability, no other reasons. Thousands of miners are mining just fine )

Its right ). 3060ti LHR palit's and 2060S

Thanks alot, i fixed it via trying good config by afterburner
Hm, have you tried the latest drivers that do LHR unlock? And does your cards in a mixed rig? Try to find failing cards with -d parameter if so

[Dowper_]

RTX 4090 - Nexa Hashrate & Profit - https://www.youtube.com/watch?v=ONZhNIffr9A
My test on RTX 4090 with WildRig Miner.

RX 5700 - Nexa Hashrate & Profit - https://www.youtube.com/watch?v=2aTzYwf61aM
My test on RX 5700 with WildRig Miner.

RX 570 8GB - Nexa Hashrate & Profit - https://www.youtube.com/watch?v=uESEKbPPqOw
My test on RX 570 8GB with WildRig Miner.

[FP91G]

WildRig Multi 0.36.5 beta

IMPORTANT HOTFIX: fixed devfee when mining on rplant pool, it was still 5% instead of 2%

Changelog since version 0.36.3:

improved nexapow up to 8% for NVIDIA gpu's
slightly improved nexapow for AMD gpu's
now 2% devfee for nexapow
RDNA3 should be supported now(at least on Windows)

https://github.com/andru-kun/wildrig-multi/releases/tag/0.36.5b

https://bitcointalk.org/index.php?topic=5023676.msg45328824#msg45328824
Check all links with this post from the developer.

[Digital_Seytan]

why wildrig mining nexa very very problems and high devfee


DEV-FEE:
- by default is 1% devfee are enof for all coins !!!!!!!!
- heavyhash is 2% for nvidia rigs
- lyra2TDC, megabtx, phi5, sha256csm and nexapow algorithms are 2%
- minotaur is 5%


This minings software Rigel https://github.com/rigelminer/rigel  works well with same nexa devfee 2%

[Gluk3000]

WildRig Multi 0.36.2 beta
- improved nexapow up to 10-20% depends on GPU
- added parameter --execute-at-start(now --execute will work on nexapow after precompute stage)
- extended statistics table with total power consumption and efficiency per gpu

IMPORTANT: This version is still beta, so some algorithms may not work.

Hi! Could you help me please on HiveOS/ Nexa coin/ RX580 8gb/ too much rejected shares. whats wrong?

reason: low difficulty share (3.9615014882423056E-10)

[andrucrypt]

WildRig Multi 0.36.2 beta
- improved nexapow up to 10-20% depends on GPU
- added parameter --execute-at-start(now --execute will work on nexapow after precompute stage)
- extended statistics table with total power consumption and efficiency per gpu

IMPORTANT: This version is still beta, so some algorithms may not work.

Hi! Could you help me please on HiveOS/ Nexa coin/ RX580 8gb/ too much rejected shares. whats wrong?

reason: low difficulty share (3.9615014882423056E-10)

First of all the only working version for Polaris gpu's is 0.36.3, newer versions are broken so far. Also you need driver version 21.40, use hive-repalce -s in Hive Shell to install latest stable HiveOS with this driver version.

[andrucrypt]

WildRig Multi 0.36.6 beta
Just a stability fix release

- fixed random hashrate drop for nexapow

IMPORTANT: This version is still beta, so some algorithms may not work.

[etoque]

Hey, can't find the information, but can we dual mine Radiant + ZIL using AMD cards ?

Appreciate