[ANN] TeamRedMiner - Old Thread

[Xdragon]

Tdxminer under Linux is faster than TeamRedMiner win10 same clocks 
Rx 480 @ 1168  3.2Mhs Linux 
Rx 480 @ 1168  2.9Mhs Win10

On pool ofc tdx is also better
On left Linux, on right win10

[1715385558]

1715385558

[1715385558]

1715385558

[kerney666]

Tdxminer under Linux is faster than TeamRedMiner win10 same clocks 
Rx 480 @ 1168  3.2Mhs Linux 
Rx 480 @ 1168  2.9Mhs Win10

On pool ofc tdx is also better
On left Linux, on right win10

Hi! Yes, it’s a known fact, it’s a limitation in the win drivers that causes it. There’s no point comparing tdxminer to this miner though since it’s the same miner . The relevant parameter above is the os.

So, maybe we haven’t said it here often enough, only on various discord channels: Linux for lyra2z and Phi2 will give you a better hashrate!

[kokodesu]

I attempted to mining Argoneum (phi 2) with BSODPool, but I got an error, so I could not mining it so I will contact you.


[2018-11-17 01:27:45] Initializing GPU 0.
[2018-11-17 01:27:45] API initialized on 127.0.0.1:4028
[2018-11-17 01:27:45] Dev pool connected and ready.
[2018-11-17 01:27:46] Initializing GPU 1.
[2018-11-17 01:27:46] Initializing GPU 2.
[2018-11-17 01:27:47] Pool eu.bsod.pw successfully subscribed.
[2018-11-17 01:27:47] Initializing GPU 3.
[2018-11-17 01:27:48] Successfully initialized GPU 0: Polaris with 32 CU (PCIe 11:00.0)
[2018-11-17 01:27:48] Successfully initialized GPU 1: Polaris with 32 CU (PCIe 07:00.0)
[2018-11-17 01:27:48] Successfully initialized GPU 2: Polaris with 32 CU (PCIe 04:00.0)
[2018-11-17 01:27:48] Successfully initialized GPU 3: Polaris with 32 CU (PCIe 06:00.0)
[2018-11-17 01:27:48] Pool eu.bsod.pw authorization succeeded.
[2018-11-17 01:27:48] Pool eu.bsod.pw set difficulty to 1.000000
[2018-11-17 01:27:48] Pool eu.bsod.pw failed to parse server rpc: {"id":null,"method":"mining.notify","params":["316","3f6fccf1cf271a3d952c35798c7f859eb2cd75f8ea1d876b00a2e5f400000000","01000000010000000000000000000000000000000000000000000000000000000000000000fffff fff1d02945604fcefee5b08","62736f642e736f6c6f2e3100000000000374d3f008000000001976a914034c09264915f26859743 fc6328f1183ae21c72e88ac88426859000000001976a9149a0e8b69da6fb0a272b0439eb9282c1c 25c3c78388ac146f7750000000001976a914750ce193f5ff703c64c285d2fb26a0c9f10c835c88a c00000000",["3c83f6c83b7312e67907b7476f7917c5a15776bbdb1b557466bc97ecc1c03356"],"20000000","1c01bc2b","5beeeffc",true]}

[kerney666]

I attempted to mining Argoneum (phi 2) with BSODPool, but I got an error, so I could not mining it so I will contact you.


[2018-11-17 01:27:45] Initializing GPU 0.
[2018-11-17 01:27:45] API initialized on 127.0.0.1:4028
[2018-11-17 01:27:45] Dev pool connected and ready.
[2018-11-17 01:27:46] Initializing GPU 1.
[2018-11-17 01:27:46] Initializing GPU 2.
[2018-11-17 01:27:47] Pool eu.bsod.pw successfully subscribed.
[2018-11-17 01:27:47] Initializing GPU 3.
[2018-11-17 01:27:48] Successfully initialized GPU 0: Polaris with 32 CU (PCIe 11:00.0)
[2018-11-17 01:27:48] Successfully initialized GPU 1: Polaris with 32 CU (PCIe 07:00.0)
[2018-11-17 01:27:48] Successfully initialized GPU 2: Polaris with 32 CU (PCIe 04:00.0)
[2018-11-17 01:27:48] Successfully initialized GPU 3: Polaris with 32 CU (PCIe 06:00.0)
[2018-11-17 01:27:48] Pool eu.bsod.pw authorization succeeded.
[2018-11-17 01:27:48] Pool eu.bsod.pw set difficulty to 1.000000
[2018-11-17 01:27:48] Pool eu.bsod.pw failed to parse server rpc: {"id":null,"method":"mining.notify","params":["316","3f6fccf1cf271a3d952c35798c7f859eb2cd75f8ea1d876b00a2e5f400000000","01000000010000000000000000000000000000000000000000000000000000000000000000fffff fff1d02945604fcefee5b08","62736f642e736f6c6f2e3100000000000374d3f008000000001976a914034c09264915f26859743 fc6328f1183ae21c72e88ac88426859000000001976a9149a0e8b69da6fb0a272b0439eb9282c1c 25c3c78388ac146f7750000000001976a914750ce193f5ff703c64c285d2fb26a0c9f10c835c88a c00000000",["3c83f6c83b7312e67907b7476f7917c5a15776bbdb1b557466bc97ecc1c03356"],"20000000","1c01bc2b","5beeeffc",true]}

Yep, we're on it, it's using a standard 80 bytes block header rather than the LUX extended block header, we need to add support for it in the kernels. It should hopefully be included in the next released version!

[YuSoDum]

I hope so. There seems to be a lot of us AMD users wanting to mine AGM.

[kokodesu]

Thank you for answering kerney 666.

[Turcy086]

My 56 vegas hit 2000H on CV8
But the vega64s hashing 2000 too. I triey many combo 16+14, 16-14 etc
Anybody has a solution?

[Juniormkl]

TeamRedMiner v0.3.7 added to https://www.minermonitoring.com/ https://www.ethmonitoring.com/ Join our discord https://discord.gg/aGGaeqq
also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

[kerney666]

My 56 vegas hit 2000H on CV8
But the vega64s hashing 2000 too. I triey many combo 16+14, 16-14 etc
Anybody has a solution?

Hi Turcy086! I moved your question to the CN thread, see https://bitcointalk.org/index.php?topic=5059817.msg48014534#msg48014534.

[jazz1984]

Hi, here is temredminer 0.17.0 output: GPU 0 - cnv8: 680.9 h/s, avg 680.0 h/s, pool 779.6 h/s a:69 r:0 hw:2
card rx470 with some moddede bios, intensity 4-4
So hw:2 its good/bad and what it means? Its hradware errors? Need to downclock?
Thank you.

Hi! Those would be found shares rejected by cpu verification, so yes, hardware errors. Tweaking clocks would be the advice.

Also, 680 h/s on a 470 is quite low? Even if it's a 4GB driving monitors, have you tried configs such as 7+7, 6+6?

I thought before there was a problem in the monitor and connected the monitor to another card, but now the afterburner does not allow to change the frequensies, and configs more agressive than 4-4 still crashes my driver. Ill try to downklock card and report than.

P.S. Why afterburner disable the frequency control, when i add gt220 card?

Now i flash lower clocks on the memory (from 1900 to 1875) and still config more than 4-4 crashes driver. May be its a windows 7 problem?

[kerney666]

Hi, here is temredminer 0.17.0 output: GPU 0 - cnv8: 680.9 h/s, avg 680.0 h/s, pool 779.6 h/s a:69 r:0 hw:2
card rx470 with some moddede bios, intensity 4-4
So hw:2 its good/bad and what it means? Its hradware errors? Need to downclock?
Thank you.

Hi! Those would be found shares rejected by cpu verification, so yes, hardware errors. Tweaking clocks would be the advice.

Also, 680 h/s on a 470 is quite low? Even if it's a 4GB driving monitors, have you tried configs such as 7+7, 6+6?

I thought before there was a problem in the monitor and connected the monitor to another card, but now the afterburner does not allow to change the frequensies, and configs more agressive than 4-4 still crashes my driver. Ill try to downklock card and report than.

P.S. Why afterburner disable the frequency control, when i add gt220 card?

Now i flash lower clocks on the memory (from 1900 to 1875) and still config more than 4-4 crashes driver. May be its a windows 7 problem?

It could def be a Win 7 problem, we don’t test/support Win 7, it seems to be working for some though.

[JoenNL]

Hey guys,

My RX580 rig works perfect, however i also got a few Hawaii cards (R290 tri-x) and this cards are not supported.
Are u guys on it or will u guys ignore this versions from AMD?

[jazz1984]

Hi, here is temredminer 0.17.0 output: GPU 0 - cnv8: 680.9 h/s, avg 680.0 h/s, pool 779.6 h/s a:69 r:0 hw:2
card rx470 with some moddede bios, intensity 4-4
So hw:2 its good/bad and what it means? Its hradware errors? Need to downclock?
Thank you.

Hi! Those would be found shares rejected by cpu verification, so yes, hardware errors. Tweaking clocks would be the advice.

Also, 680 h/s on a 470 is quite low? Even if it's a 4GB driving monitors, have you tried configs such as 7+7, 6+6?

I thought before there was a problem in the monitor and connected the monitor to another card, but now the afterburner does not allow to change the frequensies, and configs more agressive than 4-4 still crashes my driver. Ill try to downklock card and report than.

P.S. Why afterburner disable the frequency control, when i add gt220 card?

Now i flash lower clocks on the memory (from 1900 to 1875) and still config more than 4-4 crashes driver. May be its a windows 7 problem?

It could def be a Win 7 problem, we don’t test/support Win 7, it seems to be working for some though.

At least the issue with hw errors was resolved:GPU 0 - cnv8: 670.2 h/s, avg 669.9 h/s, pool 619.3 h/s a:570 r:0 hw:0. Want to try this miner with linux, than report.

[Mashy81]

Will you guys support zcoin MTP algo?

[todxx]

Team Red Miner v0.3.8 released

https://github.com/todxx/teamredminer/releases

Changes in v0.3.8

• Added support for fan speed and temperatures.
• Added watchdog function for gpu init stuck, dead gpu, over-temp gpu, and non-responding pool.
• Added new optional 'L' config prefix for low-end cards like lexa/baffin for a 10+% speed-up on some cards
• Added an option for writing out a log file.
• Added cycling through multi-entry dns records when connecting to pools.
• Added a pool-connect timeout.
• Added measurement and displaying of pool response times.
• Added support for 80-byte headers for Phi2 algo (for non-LUX coins).
• Slightly tuned the '+' mode for polaris, some GPUs will show slight performance increase.
• Fixed bug with API interface occasionally getting stuck.

You can now use this miner to mine phi2 coins other than LUX!

[dragonmike]

Good job again Todxx and Kerney666.
Your Phi2 miner is a whopping 50% faster than FancyIX's attempt at forking Sgminer.

What also needs to be said is that this miner is rock solid. At the same clocks, Sgminer will die a thousand deaths. This just runs. Beautiful.

 

[todxx]

Will you guys support zcoin MTP algo?

Hey Mashy81,

We will not be supporting MTP, at least initially.  Due to the way the Zcoin team decided to setup the MTP proofs, it has created a huge mess for the stratum protocol.
It will take a lot of effort for us to support the new stratum protocol, and we have other higher priority items on our todo list right now.

[todxx]

Good job again Todxx and Kerney666.
Your Phi2 miner is a whopping 50% faster than FancyIX's attempt at forking Sgminer.

What also needs to be said is that this miner is rock solid. At the same clocks, Sgminer will die a thousand deaths. This just runs. Beautiful.

 

Thanks dragonmike!  It's always nice to know one's work is appreciated

[dragonmike]

Good job again Todxx and Kerney666.
Your Phi2 miner is a whopping 50% faster than FancyIX's attempt at forking Sgminer.

What also needs to be said is that this miner is rock solid. At the same clocks, Sgminer will die a thousand deaths. This just runs. Beautiful.

 

Thanks dragonmike!  It's always nice to know one's work is appreciated

Credit's given when credit's due.

I personally hope you'll finally release a good x16r miner for AMD. What's out there really doesn't do AMD justice currently.

When a Vega56 only gets 2/3 of the hashrate of a GTX 1080 at 50% more power, you know there's... potential.

[kokodesu]

Team Red Miner v0.3.8 released

https://github.com/todxx/teamredminer/releases

Changes in v0.3.8

• Added support for fan speed and temperatures.
• Added watchdog function for gpu init stuck, dead gpu, over-temp gpu, and non-responding pool.
• Added new optional 'L' config prefix for low-end cards like lexa/baffin for a 10+% speed-up on some cards
• Added an option for writing out a log file.
• Added cycling through multi-entry dns records when connecting to pools.
• Added a pool-connect timeout.
• Added measurement and displaying of pool response times.
• Added support for 80-byte headers for Phi2 algo (for non-LUX coins).
• Slightly tuned the '+' mode for polaris, some GPUs will show slight performance increase.
• Fixed bug with API interface occasionally getting stuck.

You can now use this miner to mine phi2 coins other than LUX!

Thank you for fixing.