windpath
Legendary
Offline
Activity: 1258
Merit: 1027
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 04, 2018, 02:44:39 PM Last edit: December 04, 2018, 11:28:08 PM by frodocooper |
|
I have an S9J with a bricked control board. Is there a way for me to run braiins os off of sd? I tried and no go, any help?
My S9 was not bricked, but I was able to boot from SD. Assuming you have Braiins loaded on a bootable SD, you need to change the jumper pins on the S9 control board. Unfortunately the case design of the S9 required me to completely disconnect the controller (all cables), unscrew the face plate and pull the whole controller card out. Below are the pin settings for the S9: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FoO2WbGI.jpg&t=665&c=h8orVZUJG3XtIg) From: https://docs.braiins-os.org/s9
|
|
|
|
Apprentice
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2018, 05:55:50 AM Last edit: December 05, 2018, 10:03:39 AM by frodocooper |
|
My S9 was not bricked, but I was able to boot from SD. Assuming you have Braiins loaded on a bootable SD, you need to change the jumper pins on the S9 control board. Unfortunately the case design of the S9 required me to completely disconnect the controller (all cables), unscrew the face plate and pull the whole controller card out. Below are the pin settings for the S9: https://i.imgur.com/oO2WbGI.jpgFrom: https://docs.braiins-os.org/s91- you can just remove the fan, pull the hashing board little bit out of the case without removing them all out until you can pull the control board. 2- or, as I did, setup 3 wires on jumper 4, that you can use to switch between NAN and SD.
|
|
|
|
Sierra8561
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2018, 06:04:24 PM |
|
Love the OS, great work. I do think implementing a fix for the temps should be a high priority.
|
|
|
|
braiins (OP)
Copper Member
Newbie
Offline
Activity: 15
Merit: 21
BTC mining: Slush Pool, Stratum V2 & Braiins OS+
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 05, 2018, 09:07:04 PM |
|
NEW RELEASE: Braiins OS Cobalt is here!Current upgrades: - new status page
- per chip frequency calibration for Antminer S9
- improved bulk upgrades
- full compatibility with AwesomeMinerApp
- ...and much more!
Visit braiins-os.org for more information and downloads.Any feedback is really appreciated! ===== Say goodbye to backdoors, closed systems and “hidden features”. Braiins OS is completely open-source and transparent. The code is available to anyone to understand, audit and verify. And of course, you are invited to build on top of it.
|
|
|
|
brndnmtthws
Newbie
Offline
Activity: 13
Merit: 11
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 12:12:44 AM Last edit: December 06, 2018, 12:38:35 AM by frodocooper |
|
It would be sweet if you also added a decent REST API. I'd like to add support to my management tool: https://github.com/brndnmtthws/mother-of-dragonsI can't find any documentation about your API, so from what I can tell the only thing available is what cgminer ships with. One thing that's great about the T1 (and Innosilicon miners) is that it has a reasonable REST API.
|
|
|
|
Artemis3
Legendary
Offline
Activity: 2030
Merit: 1568
CLEAN non GPL infringing code made in Rust lang
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 12:26:15 AM |
|
So, what free open source monitoring software can be used with this version?
|
█████████████████████████ ██████████████████████████ ██████████████████████████ ███████████████████████████ | BRAIINS OS+| | AUTOTUNING MINING FIRMWARE| | Increase hashrate on your Bitcoin ASICs, improve efficiency as much as 25%, and get 0% pool fees on Braiins Pool | |
|
|
|
rahuldel
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 04:45:20 AM |
|
What are the steps for updating the firmware, I have tried updating via ssh and via software menu but to no success.
Or do we have to re-image the card again?
Thanks.
|
|
|
|
userghost
Jr. Member
Offline
Activity: 284
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 05:41:04 AM |
|
Ok on a scale of 1-10 how easy is this to load on to S9's and T1's. How technical savvy do I have to be?
|
|
|
|
Brickman67
Newbie
Offline
Activity: 53
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 08:19:20 AM Last edit: December 07, 2018, 04:06:45 AM by frodocooper |
|
Trying out the software for the first time. My other machines everything is good. I have one that the fans are at full RPM's and not temp readings... It is hashing just fine according to slush pool and awesomeminer....
Any ideas on how to correct this?
Thanks in advance.
|
|
|
|
braiins (OP)
Copper Member
Newbie
Offline
Activity: 15
Merit: 21
BTC mining: Slush Pool, Stratum V2 & Braiins OS+
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 09:51:49 AM |
|
Hi everyone, we recommend to read through the documentation on this website. There is a step-by-step manual how to flash bOS to the mining device. Hopefully it will be helpful.
|
|
|
|
QAEng
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 11:51:11 AM Last edit: December 07, 2018, 04:07:03 AM by frodocooper |
|
Guys.....A new release, but the temperature issue is STILL not resolved?! Wtf....That was the #1 issue....
|
|
|
|
sergw
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 159
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 12:12:00 PM |
|
hello, if i upgrade from original fw to braiinsOS via web-interface, how may i roll back to original fw later?
|
|
|
|
brndnmtthws
Newbie
Offline
Activity: 13
Merit: 11
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 12:56:22 PM Last edit: December 07, 2018, 04:07:41 AM by frodocooper |
|
So, what free open source monitoring software can be used with this version?
None AFAIK, but I'd be happy to add support to my project if they're willing to work with me ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
windpath
Legendary
Offline
Activity: 1258
Merit: 1027
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 02:24:35 PM |
|
NEW RELEASE: Braiins OS Cobalt is here!
Thanks guys! Appreciate your continued work, great update. As a side note, I tried to update through the web interface, I could update the package lists but could not find any option to upgrade. Upgrading via SSH was no problem.
|
|
|
|
rahuldel
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 02:32:48 PM Last edit: December 07, 2018, 04:08:17 AM by frodocooper |
|
I am getting the following errors while upgrading via ssh: opkg update Downloading http://downloads.lede-project.org/releases/17.01.4/packages/arm_cortex-a9_neon/base/Packages.gz Updated list of available packages in /var/opkg-lists/reboot_base Downloading http://downloads.lede-project.org/releases/17.01.4/packages/arm_cortex-a9_neon/base/Packages.sig Signature check passed. Downloading http://downloads.lede-project.org/releases/17.01.4/packages/arm_cortex-a9_neon/luci/Packages.gz Updated list of available packages in /var/opkg-lists/reboot_luci Downloading http://downloads.lede-project.org/releases/17.01.4/packages/arm_cortex-a9_neon/luci/Packages.sig Signature check passed. Downloading http://downloads.lede-project.org/releases/17.01.4/packages/arm_cortex-a9_neon/packages/Packages.gz Updated list of available packages in /var/opkg-lists/reboot_packages Downloading http://downloads.lede-project.org/releases/17.01.4/packages/arm_cortex-a9_neon/packages/Packages.sig Signature check passed. Downloading http://downloads.lede-project.org/releases/17.01.4/packages/arm_cortex-a9_neon/routing/Packages.gz Updated list of available packages in /var/opkg-lists/reboot_routing Downloading http://downloads.lede-project.org/releases/17.01.4/packages/arm_cortex-a9_neon/routing/Packages.sig Signature check passed. Downloading http://downloads.lede-project.org/releases/17.01.4/packages/arm_cortex-a9_neon/telephony/Packages.gz Updated list of available packages in /var/opkg-lists/reboot_telephony Downloading http://downloads.lede-project.org/releases/17.01.4/packages/arm_cortex-a9_neon/telephony/Packages.sig Signature check passed.
opkg install firmware Unknown package 'firmware'. Collected errors: * opkg_install_cmd: Cannot install package firmware.
Not sure what is wrong?
|
|
|
|
Apprentice
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 05:00:45 PM |
|
with the latest firmware, chains frequency is not working. can only see chains 6,7 and 8 on the miner page. changing the frequency under the cgminer page is not affecting anything.
anyone? thanks!
|
|
|
|
papampi_2
Jr. Member
Offline
Activity: 112
Merit: 3
Linux Forever... Resistance is futile!!!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 06:53:07 PM Last edit: December 07, 2018, 04:08:53 AM by frodocooper |
|
hello, if i upgrade from original fw to braiinsOS via web-interface, how may i roll back to original fw later?
I have the same question.
|
https://github.com/papampi/nvOC_by_fullzero_Community_Release
|
|
|
rz66
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 67
Merit: 31
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 06, 2018, 07:55:35 PM |
|
'opkg update; opkg install firmware' did not work well
miner stuck 'cannot connect to cgminer' .. went back to previous firmware, now chain config is gone.
|
|
|
|
braiins (OP)
Copper Member
Newbie
Offline
Activity: 15
Merit: 21
BTC mining: Slush Pool, Stratum V2 & Braiins OS+
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 07, 2018, 09:38:40 AM Last edit: December 07, 2018, 09:58:35 AM by frodocooper |
|
hello, if i upgrade from original fw to braiinsOS via web-interface, how may i roll back to original fw later?
Hi, I recommend you to follow this manual. If there are any problems, please create a ticket here.
|
|
|
|
yuragim75
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 07, 2018, 01:28:18 PM Last edit: December 07, 2018, 11:50:10 PM by frodocooper |
|
Dear braiins, just a few times Bac were asked to record a video of a set installation for a visual deconstruction. Did he try to do this ?? Forgive you to explain everything one by one to write down the video?
|
|
|
|
|