ttlargura1
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 21, 2018, 12:58:33 AM |
|
So i unplugged my Zig Z1 to install a shroud and when i plugged it back in the red light was on and I now cant log into my miner from the ip address. Tried hard reset and scanning for a different IP address but I can log into it all all. Has anyone experiance this or have any ideas on how to fix this issue? Any help would be greatly appreciated.
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 21, 2018, 09:15:02 AM |
|
I have been mining the Zig Z1 for a couple of weeks now -- have tried a number of sites -- individual coins and multi-coin sites -- best I have come across so far a Prohash and Zpool. I found suprnova had issues with the hashrate falling off precipitously, experienced a less severe gradual decline at blockmaster as well. Zpool seems to be consistent however have to reboot machine every two to three days or so to keep hashrate up. Running at 850mhs -- average hashrate 6-6.2.
Try what was noted earlier in the forum... Change the foillowing in an exported JSON: From: "auto_frequent":"0","frequency":"850" to "auto_frequent":"1","frequency":"1000" It worked wonders for me. Will this settings work for Z1+ too ?
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
ttlargura1
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 21, 2018, 02:46:30 PM |
|
Not sure how to load this onto the USB, do you need to extract the files first. Z1 not booting at all. There is included usb imaging software in the first folder I believe. You also need to unzip the .7z file, because it contains the image. Run the imaging software and choose the image that was unzipped. I used a different usb drive thanwhat came with it and after a couple user error problems, I got it to work. Can you elaborate on how you got it to work? I bought a 16 GB flash drive and loaded the image via the included exe, but I can't connect to the machine's web interface to make changes or set the static ip. Are you on a 192.168.1.x network, the default IP is 192.168.1.100 No, I'm on 192.168.0.x That's your problem. Either give yourself a 192.168.1.x address and connect to the ASIC directly to change the Z1 IP to 192.168.0.x, or change your network to 192.168.1.x. You could cheat by changing the subnet on the network from 255.255.255.0 to 255.255.0.0 So I switched my network to 192.168.1.x, but I still can't get it at 192.168.1.100 and I can't see it on the ip scanner or my router. My service goes from cable modem to Tenda wireless router to a switch (via ethernet) and then to the asic. Any other suggestions? I've also been trying to reset it, is there a special sequence for that? Thanks for your help BTW, this one is stumping me! It might not work now since you messed with the USB. Did the USB creation involve running an EXE program that writes an ISO image file to the USB? I used the imageUSB exe that was included in the zip file and I wrote the z1_static_100_09_14 image file to it. Why would you do that? You can just enter the interface and upload the new firmware from the settings. Did it work after all? I did firmware upgrade thru the interface settings and it's working for 5 days without any problems. Less Hw errors and rejects... The ASIC was on a different network, he assumed that it was not working I got it! My stupid free windows unzip "App" didn't create a proper image file... re-extracted (while watching ads, not minimized) and it works! Thanks for the help! Hello, I think i am experiencing the same issue that you had. My miner has a red light on it and I can no longer find my IP address. It worked fine for weeks but then i unplugged it and plugged it back in and the red light was there. What exactly did you put on the USB to make it work. I tried using a new USB that i bought and putting the new firmware on it and putting it in the miner but I still wasn't able to log into my miner. Any help with this issue would be greatly appreciated.
|
|
|
|
amirkhan1361
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 21, 2018, 07:08:56 PM |
|
what is Dayun website?
|
|
|
|
Phuripat
Newbie
Offline
Activity: 26
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 01:22:06 AM Merited by vapourminer (1) |
|
How to upgrade thermal paste to more stability and cool the chips. Original thermal paste will dry and lower conduct the heat. And not full of contact surface. 1.this is picture front and back of board https://ibb.co/iZ8bwLhttps://ibb.co/nKjS302. Screw of at front 6 screw each heat sink then clean the old thermal paste , you will see a not full contact surface then unscrew 2 screw to release the back plate.(Direct contact to PCB board) and clean https://ibb.co/mvU5qfhttps://ibb.co/mwFObLhttps://ibb.co/fYxEi03. clean PCB board https://ibb.co/dGbUGL4. place a Arctic MX-4. I choose it because high conductivity of heat 8.5watt/MK , cheap and durability for 8 years. put the black plate to cover the back and screw 2 screw https://ibb.co/jpwUGLput thethermal paste to your chips and spread to make sure fully contact surface. https://ibb.co/etiLO0Finish, result decrease in 2-3 celcius in the same condition. better stability for hashing. I use approximate 10-12g of arctic MX-4. then you must prepare enough thermal paste. statistic from nicehash, this is Z1 not Z1+ https://ibb.co/bQTC30
|
|
|
|
yrk1957 (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 531
Merit: 29
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 01:30:27 AM |
|
How to upgrade thermal paste to more stability and cool the chips. Original thermal paste will dry and lower conduct the heat. And not full of contact surface. 1.this is picture front and back of board https://ibb.co/iZ8bwLhttps://ibb.co/nKjS302. Screw of at front 6 screw each heat sink then clean the old thermal paste , you will see a not full contact surface then unscrew 2 screw to release the back plate.(Direct contact to PCB board) and clean https://ibb.co/mvU5qfhttps://ibb.co/mwFObLhttps://ibb.co/fYxEi03. clean PCB board https://ibb.co/dGbUGL4. place a Arctic MX-4. I choose it because high conductivity of heat 8.5watt/MK , cheap and durability for 8 years. put the black plate to cover the back and screw 2 screw https://ibb.co/jpwUGLput thethermal paste to your chips and spread to make sure fully contact surface. https://ibb.co/etiLO0Finish, result decrease in 2-3 celcius in the same condition. better stability for hashing. I use approximate 10-12g of arctic MX-4. then you must prepare enough thermal paste. statistic from nicehash, this is Z1 not Z1+ https://ibb.co/bQTC30What were your before and after temps? Mine are currently at 34-35 C for all four boards without any changes, ambient 22C.
|
|
|
|
Mordred80
Jr. Member
Offline
Activity: 70
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 06:49:04 AM Last edit: October 22, 2018, 09:29:38 AM by Mordred80 |
|
You guys know what happend to the profitability of this miner? It went down over 60% in the last 6-8h!What-To-Mine still shows 45-50$ NiceHash calculator the same: 45-50$ But they don't use real-time data so this is wrong... Here you can see what you really earn: https://www.asicminervalue.com/miners/dayun/zig-z1We are down to 20$ -somthing a day And my app (NiceHash Monitor) tells me the same...20$ -somthing a day.
|
|
|
|
Silent_samurai
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 08:32:30 AM |
|
the same is happen to me does any one know what happen? I think it's coz of Vertcoin rate goes down
|
|
|
|
flexmeister
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 08:35:50 AM |
|
wow, not good.. vertcoin network hashrate went from 1.35Th/s to 3.4Th/s, monacoin went from 4Th/s to 8Th/s. Guess some big mining operation or a more powerful asic came online
|
|
|
|
Mordred80
Jr. Member
Offline
Activity: 70
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 08:42:04 AM Last edit: October 22, 2018, 09:30:05 AM by Mordred80 |
|
wow, not good.. vertcoin network hashrate went from 1.35Th/s to 3.4Th/s, monacoin went from 4Th/s to 8Th/s. Guess some big mining operation or a more powerful asic came online
I see, let me guess... Soon Bitmain will announce a new lyra2rev2 asic that will be shippend in 1-2month. Truth is, the miners are already build and they are using them before they sell them...just a theory but some ppl say this happend before.
|
|
|
|
|
alex.asic
Newbie
Offline
Activity: 49
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 08:47:08 AM |
|
I saw this as soon as i got home from work and thought the market had gone through the floor. You guys know what happend to the profitability of this miner? It went down over 60% in the last 6-8h!What-To-Mine still shows 45-50$ NiceHash calculator the same: 45-50$ But they don't use real-time data so this is wrong... Here you can see what you really earn: https://www.asicminervalue.com/miners/dayun/zig-z1We are down to 20$ -somthing a day An my app (NiceHash Monitor) tells me the same...20$ -somthing a day.
|
|
|
|
Silent_samurai
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 09:19:10 AM |
|
Hey Joyson do you whats the reason of profitably of z1? what is the problem?
|
|
|
|
streenip
Jr. Member
Offline
Activity: 39
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 09:21:49 AM |
|
I saw this as soon as i got home from work and thought the market had gone through the floor. You guys know what happend to the profitability of this miner? It went down over 60% in the last 6-8h!What-To-Mine still shows 45-50$ NiceHash calculator the same: 45-50$ But they don't use real-time data so this is wrong... Here you can see what you really earn: https://www.asicminervalue.com/miners/dayun/zig-z1We are down to 20$ -somthing a day An my app (NiceHash Monitor) tells me the same...20$ -somthing a day. Any idea what happened cos I just saw this now on Asicminervalue and really worried as a Z1+ is getting shipped to me as we speak
|
|
|
|
hafez70
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 09:41:31 AM |
|
Hi!
I am newbe with this hardware and i recently ordered one from china.
Is there anyone who can give me real profitability experience about Zig Z1 + here ?! Is it good at all ?!
|
|
|
|
steliozz
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 09:42:12 AM |
|
wow, not good.. vertcoin network hashrate went from 1.35Th/s to 3.4Th/s, monacoin went from 4Th/s to 8Th/s. Guess some big mining operation or a more powerful asic came online
I see, let me guess... Soon Bitmain will announce a new lyra2rev2 asic that will be shippend in 1-2month. Truth is, the miners are already build and they are using them before they sell them...just a theory but some ppl say this happend before. Yeah, very possible. There were some big orders pending too (we have that info from the factory). Probably they got shipped out last week and have been connected last night. Dayun is not very open at communications since its said also that the actual factory is Pangolin (At least our hashboards that were dead were sent to the Whatsminer factory)...Playing little games the Chinese as usual. The A9 has shown good stability and is now again our main target when stocking up our farm...
|
|
|
|
Mordred80
Jr. Member
Offline
Activity: 70
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 09:59:18 AM |
|
|
|
|
|
steliozz
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 10:05:03 AM |
|
wow, not good.. vertcoin network hashrate went from 1.35Th/s to 3.4Th/s, monacoin went from 4Th/s to 8Th/s. Guess some big mining operation or a more powerful asic came online
I see, let me guess... Soon Bitmain will announce a new lyra2rev2 asic that will be shippend in 1-2month. Truth is, the miners are already build and they are using them before they sell them...just a theory but some ppl say this happend before. Yeah, very possible. There were some big orders pending too (we have that info from the factory). Probably they got shipped out last week and have been connected last night. Dayun is not very open at communications since its said also that the actual factory is Pangolin (At least our hashboards that were dead were sent to the Whatsminer factory)...Playing little games the Chinese as usual. The A9 has shown good stability and is now again our main target when stocking up our farm... still not get confirmed news from China market ,will let u know if any internal news we got , I am internal too my friend ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) But always good if you share some more insights. I am in China myself, just Friday I went to the factory checking on our miner order for this week.
|
|
|
|
yrk1957 (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 531
Merit: 29
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 10:44:43 AM |
|
Profit is slowly crawling back up. So looks like another manufacturer testing...
|
|
|
|
hafez70
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 22, 2018, 11:08:08 AM |
|
Which pool is the best for dayun zig z1 + in this situation ?! ![Embarrassed](https://bitcointalk.org/Smileys/default/embarrassed.gif)
|
|
|
|
|