Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner

[yrk1957]

Will anyone actually ROI on those before you earn 4$/day?

Sure, if its priced at $1000.

[1714539343]

1714539343

[1714539343]

1714539343

[1714539343]

1714539343

[1714539343]

1714539343

[1714539343]

1714539343

[1714539343]

1714539343

[esol]

Hi, where to download  firmware 20181015?

https://download.zigminer.com - > https://drive.google.com/drive/folders/140pQoDsOyFXmLVz44op_xkKKBigp8g8o

[divseb]

What's append whith zig z1 profitability, anyone can explain me how the price drop down of 50 to 20 $ in 1 day, i see chart's and don't find price shut down in verge or monacoin. WTF.

And we are the 1 nov and nothing has changing, i don't see how the price become to 50$/day now. bad bad bad.

[esol]

Will anyone actually ROI on those before you earn 4$/day?

Sure, if its priced at $1000.

it is already 1900 USD
I guess 1000 it's just a matter of days... or hours!

http://www.dayunmining.com

[yrk1957]

Will anyone actually ROI on those before you earn 4$/day?

Sure, if its priced at $1000.

it is already 1900 USD
I guess 1000 it's just a matter of days... or hours!

http://www.dayunmining.com

OMG!

[lennujuht]

Hi, where to download  firmware 20181015?

https://download.zigminer.com - > https://drive.google.com/drive/folders/140pQoDsOyFXmLVz44op_xkKKBigp8g8o

Thanks a lot. What is the best way to install firmware correctly?

[yrk1957]

Will anyone actually ROI on those before you earn 4$/day?

Sure, if its priced at $1000.

it is already 1900 USD
I guess 1000 it's just a matter of days... or hours!

http://www.dayunmining.com

OMG!

Pretty sure that's a scam site, either way, I'm glad I sold mine for what I paid for it after mining with it for 11 days back in September, thing turned out to be a piece of junk.

They started selling around $10,000 I believe.

[divseb]

Ok i understand now, thx for reply, i haven't read another thread's, i have running mine 2 days ago, no chance.if the price continue to drop down, it's a very bad deal to buying this asic. pfff

[streenip]

It’s 1:30 am in China, any improvement on the income?

Remember a simple thing: nowadays mainly only miming hardware manufacturers and hardware resellers earn money in crypto mining  sphere.

This is so true...however my naivity gave me hope. Paid for Z1+ over $4200 on Saturday only to see the price plunge on Monday. Those with the Z1’s have paid much more and are probably sitting in the same boat as most of us. This is a cruel game, not for the faint-hearted

[esol]

Hi, where to download  firmware 20181015?

https://download.zigminer.com - > https://drive.google.com/drive/folders/140pQoDsOyFXmLVz44op_xkKKBigp8g8o

Thanks a lot. What is the best way to install firmware correctly?

simply unpack the archive and burn z1_static_100_10_15_850M.img file to a USB key with imageUSB.exe

[esol]

Will anyone actually ROI on those before you earn 4$/day?

Sure, if its priced at $1000.

it is already 1900 USD
I guess 1000 it's just a matter of days... or hours!

http://www.dayunmining.com

OMG!

Pretty sure that's a scam site, either way, I'm glad I sold mine for what I paid for it after mining with it for 11 days back in September, thing turned out to be a piece of junk.

agree, this domain has been registered 15 days ago...

 

Code:

  Domain Name: DAYUNMINING.COM
   Registry Domain ID: 2321227236_DOMAIN_COM-VRSN
   Registrar WHOIS Server: whois.godaddy.com
   Registrar URL: http://www.godaddy.com
   Updated Date: 2018-10-14T00:22:48Z
   Creation Date: 2018-10-14T00:22:48Z

and below what they answered me today after asking about the repair policy for my defective Z1...

Repair can be $600.

We offer previous customers $500 for any miner. Buy as many as you need to become profitable again. If this suits, Ill make coupon for you so you can buy any miner on site for 500

-H**n
dayunmining.com

[Tarlatata]

Will anyone actually ROI on those before you earn 4$/day?

Sure, if its priced at $1000.

it is already 1900 USD
I guess 1000 it's just a matter of days... or hours!

http://www.dayunmining.com

OMG!

Pretty sure that's a scam site, either way, I'm glad I sold mine for what I paid for it after mining with it for 11 days back in September, thing turned out to be a piece of junk.

agree, this domain has been registered 15 days ago...

 

Code:

  Domain Name: DAYUNMINING.COM
   Registry Domain ID: 2321227236_DOMAIN_COM-VRSN
   Registrar WHOIS Server: whois.godaddy.com
   Registrar URL: http://www.godaddy.com
   Updated Date: 2018-10-14T00:22:48Z
   Creation Date: 2018-10-14T00:22:48Z

and below what they answered me today after asking about the repair policy for my defective Z1...

Repair can be $600.

We offer previous customers $500 for any miner. Buy as many as you need to become profitable again. If this suits, Ill make coupon for you so you can buy any miner on site for 500

-H**n
dayunmining.com

dayunmining is a scam site.

https://www.zigminer.com/

[metnet]

here is the image

https://www.photobox.co.uk/my/photo/full?photo_id=501217957927

hi, my Z1 stopped mining suddenly as I've discovered the dashboard reports outtake fan speed to "0"

of course the fan is connected and running, but most likely the logic board don't recognise anymore the RPM sensor. Some component possibly has gone...

any idea how to set by software to avoid FAN speed check?

any other idea?
thanks!
/E

hi

you can set ignore fan speed via setting section. on the interface of dayun z1, enter the setting  and then auto stop miner  you can make it off.  but be careful  you can burned the machine if fan does not properly work.

thanks so much mate, but I cannot find any "ignore fan speed" setting anywhere;
which firmare release? I'm running 20180926.

Kindly let me know if Is there a specific entry (and his correct syntax) shown in your JSON Conf,
/E

update: just installed firmware 20181015, still no clue where to find that "magic" setting...

[m3y5am]

today is November 2 ,  but profit
less of 20$

dayun company is biggest Lier

Got this mail from Dayun:

[Dayun Company] Information about Profitability

 

We noticed that the profitability of our equipment dropped to $20/day.

This problem will be solved by November 1, the complexity of the network will be increased, and earnings will be restored.

In this regard, we offer you a coupon for a discount of 14% (free shipping is included), which is valid until October 31.

Discount code is: —

Thank you for staying with us!

So, what’s up on Nov 1?

[streenip]

today is November 2 ,  but profit
less of 20$

dayun company is biggest Lier

Got this mail from Dayun:

[Dayun Company] Information about Profitability

 

We noticed that the profitability of our equipment dropped to $20/day.

This problem will be solved by November 1, the complexity of the network will be increased, and earnings will be restored.

In this regard, we offer you a coupon for a discount of 14% (free shipping is included), which is valid until October 31.

Discount code is: —

Thank you for staying with us!

So, what’s up on Nov 1?

Fake site, fake news...reasons for the drop discussed on previous chats

[m3y5am]

Hi guys
There is a WhatsApp group for miners.
All miners are there. All let's be there so we can have an online conversation and guide each other
https://chat.whatsapp.com/DaHV50fCmrF837Gr7QPWUA
https://chat.whatsapp.com/DaHV50fCmrF837Gr7QPWUA
https://chat.whatsapp.com/DaHV50fCmrF837Gr7QPWUA

[esol]

this URL redirects to PhotoBox home page...
could PM the pict itself or give me clear instructions?
thanks!

here is the image

hi, my Z1 stopped mining suddenly as I've discovered the dashboard reports outtake fan speed to "0"

of course the fan is connected and running, but most likely the logic board don't recognise anymore the RPM sensor. Some component possibly has gone...

any idea how to set by software to avoid FAN speed check?

any other idea?
thanks!
/E

hi

you can set ignore fan speed via setting section. on the interface of dayun z1, enter the setting  and then auto stop miner  you can make it off.  but be careful  you can burned the machine if fan does not properly work.

thanks so much mate, but I cannot find any "ignore fan speed" setting anywhere;
which firmare release? I'm running 20180926.

Kindly let me know if Is there a specific entry (and his correct syntax) shown in your JSON Conf,
/E

update: just installed firmware 20181015, still no clue where to find that "magic" setting...

[metnet]

this URL redirects to PhotoBox home page...
could PM the pict itself or give me clear instructions?
thanks!

User 'esol' has not chosen to allow messages from newbies. You should post in their relevant thread to remind them to enable this setting.
therefore i could not.

it opens but i uploaded another site. http://i64.tinypic.com/a299c3.png
 https://ibb.co/k0ofXf

here is the image

https://www.photobox.co.uk/my/photo/full?photo_id=501217957927

hi, my Z1 stopped mining suddenly as I've discovered the dashboard reports outtake fan speed to "0"

of course the fan is connected and running, but most likely the logic board don't recognise anymore the RPM sensor. Some component possibly has gone...

any idea how to set by software to avoid FAN speed check?

any other idea?
thanks!
/E

hi

you can set ignore fan speed via setting section. on the interface of dayun z1, enter the setting  and then auto stop miner  you can make it off.  but be careful  you can burned the machine if fan does not properly work.

thanks so much mate, but I cannot find any "ignore fan speed" setting anywhere;
which firmare release? I'm running 20180926.

Kindly let me know if Is there a specific entry (and his correct syntax) shown in your JSON Conf,
/E

update: just installed firmware 20181015, still no clue where to find that "magic" setting...

[metnet]

"lyra2rev2-asic-x": "4",
"lyra2rev2-asic-y": "24",
"lyra2rev2-asic-num": "50",

I suppose "asic-x" = 4 means there are 4 hash-boards, "asic-y" = 24 means there are 24 chips in each has-board.
So does anyone know the meaning of "asic-num" =50?
I tried a value of 80 and ran for 12 hours. The hashrate still not stable, but no offline. Need more time to test.

Hi @sysubeing

i tried this but system may not reboot. how come you did it.

thanks.

[metnet]

new update is online 29.Oct.2018
download.zigminer.comdownload.zigminer.com