Dayun Zig Z1 - Lyra2Rev2 6.8GH/s Asic miner

[zigminer]

@zigminer

frequently one or two hashboard goes 0 (zero). if it goes to 0, it stays long time unless device restart.
would you please make it new image that detect low hashrate and zero and restart just one or two hashboard separately.

thanks in advance.

next version will slove this bug.

[karachoba]

yes it is true. my device z1 and my friend device is  z1, too. we bought them almost same date. both we are using 1409 image verison. we used same config but he made oc to 1000 mhz but i can not. think about how come it is possible. this is strange.

This is called "silicon lottery". Google it.

yes i read it thanks. but it is little bit different. i think manufacturer limited some machines by bios. and then they announced zig1 plus. they sold more.

You can believe what you like, but if they're the same revision and the same firmware, it's a silicon lottery issue.

to @zigminer founder

we are still awating this question's answer ("these machines able to run lyra2rev3 in near future or any other algo") which is very important for all Zig Z1 owner particularly purchased more than 1 unit like me  I have 10 unit cost are 60K$ so that money went into @zigminer pocket  , We dont want to cry but We are awaiting answer for that boxes what will happen in the future as their costs were so expensive
so please kindly answer this question is there any development road map for "these machines able to run lyra2rev3 in near future or any other algo"?.

These machines has advantage like external USB which means if you really want and have good intention to the Zig Z customer, I am pretty sure that these machines mine with any other algo or  lyra2rev3 algo , because device design and chip capability is compatible for that miner!
We are looking forward your positive answer many thanks in advance.

[areyouathief]

to @zigminer founder

we are still awating this question's answer ("these machines able to run lyra2rev3 in near future or any other algo") which is very important for all Zig Z1 owner particularly purchased more than 1 unit like me  I have 10 unit cost are 60K$ so that money went into @zigminer pocket  , We dont want to cry but We are awaiting answer for that boxes what will happen in the future as their costs were so expensive
so please kindly answer this question is there any development road map for "these machines able to run lyra2rev3 in near future or any other algo"?.

These machines has advantage like external USB which means if you really want and have good intention to the Zig Z customer, I am pretty sure that these machines mine with any other algo or  lyra2rev3 algo , because device design and chip capability is compatible for that miner!
We are looking forward your positive answer many thanks in advance.

I really doubt it will be able to mine lyra2v3, while internal Lyra2 function is changed.
It will change into "MonaMiner" soon... (and only if Mona won't fork too)

[PostJok]

to @zigminer founder

we are still awating this question's answer ("these machines able to run lyra2rev3 in near future or any other algo") which is very important for all Zig Z1 owner particularly purchased more than 1 unit like me  I have 10 unit cost are 60K$ so that money went into @zigminer pocket  , We dont want to cry but We are awaiting answer for that boxes what will happen in the future as their costs were so expensive
so please kindly answer this question is there any development road map for "these machines able to run lyra2rev3 in near future or any other algo"?.

These machines has advantage like external USB which means if you really want and have good intention to the Zig Z customer, I am pretty sure that these machines mine with any other algo or  lyra2rev3 algo , because device design and chip capability is compatible for that miner!
We are looking forward your positive answer many thanks in advance.

It is an ASIC, it can hash one algorithm and that pretty good. You can´t just update the software and it hashes another algo.

[metnet]

@zigminer

frequently one or two hashboard goes 0 (zero). if it goes to 0, it stays long time unless device restart.
would you please make it new image that detect low hashrate and zero and restart just one or two hashboard separately.

thanks in advance.

next version will solve this bug.

thanks @zigminer

[Phuripat]

to @zigminer founder

we are still awating this question's answer ("these machines able to run lyra2rev3 in near future or any other algo") which is very important for all Zig Z1 owner particularly purchased more than 1 unit like me  I have 10 unit cost are 60K$ so that money went into @zigminer pocket  , We dont want to cry but We are awaiting answer for that boxes what will happen in the future as their costs were so expensive
so please kindly answer this question is there any development road map for "these machines able to run lyra2rev3 in near future or any other algo"?.

These machines has advantage like external USB which means if you really want and have good intention to the Zig Z customer, I am pretty sure that these machines mine with any other algo or  lyra2rev3 algo , because device design and chip capability is compatible for that miner!
We are looking forward your positive answer many thanks in advance.

It is an ASIC, it can hash one algorithm and that pretty good. You can´t just update the software and it hashes another algo.

You must to read and learn more.

[karachoba]

to @zigminer founder

we are still awating this question's answer ("these machines able to run lyra2rev3 in near future or any other algo") which is very important for all Zig Z1 owner particularly purchased more than 1 unit like me  I have 10 unit cost are 60K$ so that money went into @zigminer pocket  , We dont want to cry but We are awaiting answer for that boxes what will happen in the future as their costs were so expensive
so please kindly answer this question is there any development road map for "these machines able to run lyra2rev3 in near future or any other algo"?.

These machines has advantage like external USB which means if you really want and have good intention to the Zig Z customer, I am pretty sure that these machines mine with any other algo or  lyra2rev3 algo , because device design and chip capability is compatible for that miner!
We are looking forward your positive answer many thanks in advance.

It is an ASIC, it can hash one algorithm and that pretty good. You can´t just update the software and it hashes another algo.

I know its an ASICs  but as @Phuripat said that YOU MUST READ and Learn more for example Baikal X10 is an ASIC and have capable more than 9 different algo and will be added later more as you can see the production's desription below!!! look at this
https://www.baikalminer.com/product09.php

[etrain]

I am not sure how to start a new post here but is anyone else having trouble changing the time zone in Version 20181130? I figured it out, had to change the jason file

[Andartis]

It is an ASIC, it can hash one algorithm and that pretty good. You can´t just update the software and it hashes another algo.

I know its an ASICs  but as @Phuripat said that YOU MUST READ and Learn more for example Baikal X10 is an ASIC and have capable more than 9 different algo and will be added later more as you can see the production's desription below!!! look at this
https://www.baikalminer.com/product09.php

Guys, Baikal just combined several (wired) algorithms in a miner. A bit like several different ASIC chips on one board. Possible algos are determined. Z1 has just one type of algo, unless dev tells us, he has implemented other algos on the chips. But why should they have done so?

[astraleureka]

I know its an ASICs  but as @Phuripat said that YOU MUST READ and Learn more for example Baikal X10 is an ASIC and have capable more than 9 different algo and will be added later more as you can see the production's desription below!!! look at this
https://www.baikalminer.com/product09.php

Baikal X10 mines X11 algorithm, which is a chain of 11 different algorithms. All of the other algos that the X10 supports are made out of the same pieces that X11 uses, which is why they are available. The chances that the ZigMiner supports anything but lyra2rev2 are slim to none.

[metnet]

I know its an ASICs  but as @Phuripat said that YOU MUST READ and Learn more for example Baikal X10 is an ASIC and have capable more than 9 different algo and will be added later more as you can see the production's desription below!!! look at this
https://www.baikalminer.com/product09.php

Baikal X10 mines X11 algorithm, which is a chain of 11 different algorithms. All of the other algos that the X10 supports are made out of the same pieces that X11 uses, which is why they are available. The chances that the ZigMiner supports anything but lyra2rev2 are slim to none.

thanks for informations. i know that lyra2rev2 is also chained 5 different algos. (Blake, Keccak, Cubehash, LYRA2, Skein and Blue Midnight Wish )
As your opinion, can one of them be used for this machine.

[etrain]

Hi Guys and Girls!

I have now activated automatic ASIC recognition on Powermining.pw pool. This ensures that your miners starts at a much better difficulty optimized for these new ASIC`s coming in these days This ensures that you will get a lot lower amount of rejected shares. We already hava a couple mining with they're Zig Z1`s online 

Lyra2v2 Coins available;
Monacoin
Vertcoin
VERGE
Shield

Will be adding a couple more tomorrow.

Join us @ https://www.powermining.pw
Discord: https://discord.gg/epFf8bF

What difficulty are people using for mining?  ie zpool?

[citronick]

Hi Guys and Girls!

I have now activated automatic ASIC recognition on Powermining.pw pool. This ensures that your miners starts at a much better difficulty optimized for these new ASIC`s coming in these days This ensures that you will get a lot lower amount of rejected shares. We already hava a couple mining with they're Zig Z1`s online 

Lyra2v2 Coins available;
Monacoin
Vertcoin
VERGE
Shield

Will be adding a couple more tomorrow.

Join us @ https://www.powermining.pw
Discord: https://discord.gg/epFf8bF

What difficulty are people using for mining?  ie zpool?

zpool

c=BTC,d=2000

[lennujuht]

Hi Guys and Girls!

I have now activated automatic ASIC recognition on Powermining.pw pool. This ensures that your miners starts at a much better difficulty optimized for these new ASIC`s coming in these days This ensures that you will get a lot lower amount of rejected shares. We already hava a couple mining with they're Zig Z1`s online 

Lyra2v2 Coins available;
Monacoin
Vertcoin
VERGE
Shield

Will be adding a couple more tomorrow.

Join us @ https://www.powermining.pw
Discord: https://discord.gg/epFf8bF

What difficulty are people using for mining?  ie zpool?

zpool

c=BTC,d=2000

NLpool c=BTC,d=512 only 2% rejects. Thanks to @yezzuurrr

[etrain]

what is nlpool?

[etrain]

Hi Guys and Girls!

I have now activated automatic ASIC recognition on Powermining.pw pool. This ensures that your miners starts at a much better difficulty optimized for these new ASIC`s coming in these days This ensures that you will get a lot lower amount of rejected shares. We already hava a couple mining with they're Zig Z1`s online 

Lyra2v2 Coins available;
Monacoin
Vertcoin
VERGE
Shield

Will be adding a couple more tomorrow.

Join us @ https://www.powermining.pw
Discord: https://discord.gg/epFf8bF

What difficulty are people using for mining?  ie zpool?

zpool

c=BTC,d=2000

NLpool c=BTC,d=512 only 2% rejects. Thanks to @yezzuurrr

What firmware and frequency are you running at

[lennujuht]

Hi Guys and Girls!

I have now activated automatic ASIC recognition on Powermining.pw pool. This ensures that your miners starts at a much better difficulty optimized for these new ASIC`s coming in these days This ensures that you will get a lot lower amount of rejected shares. We already hava a couple mining with they're Zig Z1`s online  

Lyra2v2 Coins available;
Monacoin
Vertcoin
VERGE
Shield

Will be adding a couple more tomorrow.

Join us @ https://www.powermining.pw
Discord: https://discord.gg/epFf8bF

What difficulty are people using for mining?  ie zpool?

zpool

c=BTC,d=2000

NLpool c=BTC,d=512 only 2% rejects. Thanks to @yezzuurrr

What firmware and frequency are you running at

firmware 1116 https://nlpool.nl/

stratum+tcp://mine.nlpool.nl:4533

Your wallet address as USER NAME> BTC wallet

c=BTC,d=512  as PASS

https://imgur.com/OL2zocY

[newgencryptomaker]

Hi Guys and Girls!

I have now activated automatic ASIC recognition on Powermining.pw pool. This ensures that your miners starts at a much better difficulty optimized for these new ASIC`s coming in these days This ensures that you will get a lot lower amount of rejected shares. We already hava a couple mining with they're Zig Z1`s online  

Lyra2v2 Coins available;
Monacoin
Vertcoin
VERGE
Shield

Will be adding a couple more tomorrow.

Join us @ https://www.powermining.pw
Discord: https://discord.gg/epFf8bF

What difficulty are people using for mining?  ie zpool?

zpool

c=BTC,d=2000

NLpool c=BTC,d=512 only 2% rejects. Thanks to @yezzuurrr

What firmware and frequency are you running at

firmware 1116 https://nlpool.nl/

stratum+tcp://mine.nlpool.nl:4533

Your wallet address as USER NAME> BTC wallet

c=BTC,d=512  as PASS

https://imgur.com/OL2zocY

Wow...looks good

Thanks I will try ....

[sierracossie86]

Anyone got a picture of the whole Status screen on the firmware version 26092018?
Just a overview of ip adress, logo, menu under logo, ++.

I am having some issues here.

If somebody uses that firmware anymore?


Also if someone could give me a picture of the same things mentioned over here, but for the firmware from 15102018
That would be much appreciated.

[metnet]

@zigminer

frequently one or two hashboard goes 0 (zero). if it goes to 0, it stays long time unless device restart.
would you please make it new image that detect low hashrate and zero and restart just one or two hashboard separately.

thanks in advance.

next version will solve this bug.

thanks @zigminer

Dear @zigminer

when will we have new image version.