[POOL] YAAMP.COM multipool multialgo profit switch with exchange

[nikname_23]

Can anyone tell me. Why is the ccminer wrote me an error "Stratum authentication error"?

Code:

ccminer-x64 -a x17 -o stratum+tcp://yiimp.eu:3777 -u my_wallet_here  c=XVG

cause you're missing ccminer-x64 -a x17 -o stratum+tcp://yiimp.eu:3777 -u my_wallet_here -p c=XVG

No. Same error with the -p . Is there any registration or password on the yiimp?
The others pools is working, but not this one.

[Epsylon3]

for XVG, the server is full (see the site, its in red)

else yep, the api port is a nice idea to implement.. later. Its a recent thing i added in the db, was not possible easily before

[lyolyalya]

seems like bitcore port 3566 is broken now on yiimp.

[nikname_23]

for XVG, the server is full (see the site, its in red)

else yep, the api port is a nice idea to implement.. later. Its a recent thing i added in the db, was not possible easily before

Thanks. I'll try luck later, i hope.

[mystere_miner]

WTH happened with bitcore in the middle of the night?  my miner was busy mining for 3 hours at 180MH/s and not a single block found, and my shares lost.  looking at the pool page, only 24 blocks found in 3 hours globally, 0 on yiimp.

[Epsylon3]

was global to BTX chain... enabled the debug logs if that reproduce again (already 2 times in 2 days)

[mystere_miner]

was global to BTX chain... enabled the debug logs if that reproduce again (already 2 times in 2 days)

So where does Yiimp get the work then if there were no new blocks?  Did it just keep on submitting hashes for the same block?  Sounds like a bug...

[Epsylon3]

The pools create the blocks, but the wallet was rejecting them (and yiimp.eu is "only" 15/20% of BTX blocks)

[bubasik]

How to make your pool on yiimp for Yenten Coin (and install yescryptR16 in stratum)  - http://www.bubasik.com/ustanavlivaem-pul-yiimp-pool-na-server-ubuntu-16-04-i-nastraivaem-yenten-coin-stratum-yescryptr16/

Translate the manual into English?

[wacko]

Hi.., can i mine x17 algo but get paid in Lux coin?
Thanks

I don't think so. Most yiimp pools either pay in the coin you mine or they convert to btc and pay you in bitcoins. I don't recall any pools that allow users to choose another altcoin to get paid with.

[Sityl]

How does it work if you mine an algo that has multiple coins?  It says they pay you in the coin you mine, but if you are mining Neoscrypt, there's three types of coins, and your wallet is obviously only going to work for one of them.

[moodonis]

How does it work if you mine an algo that has multiple coins?  It says they pay you in the coin you mine, but if you are mining Neoscrypt, there's three types of coins, and your wallet is obviously only going to work for one of them.

Usually there is something like a password for the currency.           -p MYCURRENCYNAME

[AndreyNag]

Hi.
I've tryed to install yaamp on my site. But stoped at "/site/adminRights"
in the readme.md is explained lighttpd config file:

Code:

# Admin access
$HTTP["url"] =~ "^/site/adminRights" {
        auth.backend = "htpasswd"
        auth.backend.htpasswd.userfile = "/etc/yiimp/admin.htpasswd"
        auth.require = (
                "/" => (
                        "method" => "basic",
                        "realm" => "Yiimp Administration",
                        "require" => "valid-user"
                )
        )
}

But how it's config for nginx?
Thnx.

[GreeneTech]

Hello all, I am new to Yiimp and I have managed to get a test pool up and running for my learning purposes.  I have added a coin and connected to the daemon, but I have a couple of things I just cant figure out. First and most importantly, when I enable the coin I added it remains enabled and visible for a few minutes and then poof! It is no longer visible on the home page.  Any idea what is causing this?  And secondly,, how in the name of the universe do you remove a coin??  ;-)   I am assuming such a function is built into the admin pages but I cannot find it.  I supposed I could manually remove them from the DB.  

Thanks all!

[Epsylon3]

you can remove it with the command line interface, see "coin" command

[GreeneTech]

you can remove it with the command line interface, see "coin" command

Thank you very much.  Any direction on the coin not staying visible to the public?

[Epsylon3]

missing getinfo ?

[GreeneTech]

When you say "coin" command are you talking about the actual daemon cli? Or does YAAMP have a cli that I am missing.  I did find the CoinCommand.php file and I can see the remove code in there but I cant find how to call upon it.

The coins getinfo is working via the coin-cli.  And it is connecting to yaamp, and pulling all the information in.  Just whenever I set auto ready via the admin panel it works for a moment on the frontend then dissapears (it unchecks the box in the admin panel as well).

[bubasik]

I made a translation into English of instructions for installing Yiimp pools (on ubuntu 16.04 with Yenten coin and yescryptr16)

Read - http://www.bubasik.com/how-to-install-the-yiimp-pool-on-the-ubuntu-16-04-server-and-configure-yenten-coin-stratum-yescryptr16/

[phm87]

I made a translation into English of instructions for installing Yiimp pools (on ubuntu 16.04 with Yenten coin and yescryptr16)

Read - http://www.bubasik.com/how-to-install-the-yiimp-pool-on-the-ubuntu-16-04-server-and-configure-yenten-coin-stratum-yescryptr16/

Hi,


Thanks a lot for the translation. Yesterday, I had a look at the pictures and github source code of your article in Russian. I had a deeper look into the code and I think that yescryptR16 may replace yescrypt if we perform these instructions. I'd like to install yescrypt R16 and Yenten to a testpool and if everything is running fine, adapt the code to have both yescrypt and yescryptR16. Then a Pull Request can be performed into tpruvot/yiimp on github.

Can you help me to figure out ? I don't want that an algo replace another one.
https://github.com/bubasik/yiimp/commits/next

Thank you,


Have a nice day