NBMiner v42.2, 100% LHR unlock for ETH mining !

[willi9974]

have the mining software keyboard inputs / hotkeys during the mining to change some settings like one GPU on or off / or intensity change +/- ?

any tips for optimizing a 3070er card?

[1714906118]

1714906118

[1714906118]

1714906118

[1714906118]

1714906118

[1714906118]

1714906118

[willi9974]

is it possible to implement in the status from the miner of level from the command line window and the webpage, the info of found shares per min? always over all and in the last 4 hrs?

[haliy-2017]

How to run a miner on a pool crazypool ?

[miner29]

How to run a miner on a pool crazypool ?

Same as you do for any pool....there is nothing special to crazypool....other than its relatively small. (looks like total of 166 miners on 2 of their pools and the third pool Ubiq has zero).

In fact if you had bothered to look in the middle just above the settings for pool there is an auto command line generator for nbminer. 

[dedizonesv2]

How to run a miner on a pool crazypool ?

Same as you do for any pool....there is nothing special to crazypool....other than its relatively small. (looks like total of 166 miners on 2 of their pools and the third pool Ubiq has zero).

In fact if you had bothered to look in the middle just above the settings for pool there is an auto command line generator for nbminer. 

166 miners ? => i see 2176 miners ! https://eth.crazypool.org/#/miners

I was at Hiveon but since I learned that it was not transparent 3% the pool + 10% mev, I went to 2miners, I really like their pool but too many miners on it but I have found this pool 1 month ago and my profitability is much better. it is a fashionable, clear and transparent pool.

I am in the top 10 for them

for Mbminer:

Code:

nbminer -a ethash -o nicehash+tcp://eu.crazypool.org:3333 -u 0x****************.Myrig

Compart here:
https://www.miningpoolsprofits.com/

[miner29]

How to run a miner on a pool crazypool ?

Same as you do for any pool....there is nothing special to crazypool....other than its relatively small. (looks like total of 166 miners on 2 of their pools and the third pool Ubiq has zero).

In fact if you had bothered to look in the middle just above the settings for pool there is an auto command line generator for nbminer. 

166 miners ? => i see 2176 miners ! https://eth.crazypool.org/#/miners

I was at Hiveon but since I learned that it was not transparent 3% the pool + 10% mev, I went to 2miners, I really like their pool but too many miners on it but I have found this pool 1 month ago and my profitability is much better. it is a fashionable, clear and transparent pool.

I am in the top 10 for them

for Mbminer:

Code:

nbminer -a ethash -o nicehash+tcp://eu.crazypool.org:3333 -u 0x****************.Myrig

Compart here:
https://www.miningpoolsprofits.com/

Seems crazypool.org reports different numbers on different pages…. https://crazypool.org/
versus your link.  Same site just strange how numbers are reported differently. 

[HS8JCV]

Hi Everyone

How to fix this problem.?

WARN - QProcess: Destroyed while process ("c:\\windows\\system32\\nvidia-smi.exe") is still running.

Thanks

[nebutech]

New version v39.0 comes with half-unlock LHR hashrate

[styleshifter]

New version v39.0 comes with half-unlock LHR hashrate

Great news!
Does it work on all LHR cards?
Can you tell us some examples hashrates?

[Juniormkl]

New version v39.0 comes with half-unlock LHR hashrate

Great news!
Does it work on all LHR cards?
Can you tell us some examples hashrates?

The unlock works but need a lot of power to run at 80+ on 3080Ti, amazing job btw.

[demkd]

driver 466.77, 3080ti (pci-e 2.0), mem: +900, -lhr 70
78mhs

[webhead]

so why does it come up as a virus now in the zip file first time nbminer is come up as a virus tut tut , chinese getting us all back.

[Semtex72]

Nicehash vs Ergo / Autolykos

Anyone else have this problem?

[00:52:53] INFO - ergo - #2 Share rejected: {"error":[5,"Invalid extranonce2 size."]}, 60 ms. [DEVICE 4, #1]

[eptimul]

New version v39.0 comes with half-unlock LHR hashrate

Great news!
Does it work on all LHR cards?
Can you tell us some examples hashrates?

Graphic Card : Palit RTX3060 DUAL OC 12GB 192Bit GDDR6 (LHR2)
Device ID : 2504
PCI-E RiserCard
OS : HiveOS
Nvidia Driver : 460.84

OC Conf : Fan/80 Core/0 MClock/2100 PL/110 Stabil 53C 32 mh/s

Amazing Job

[webhead]

so why does it come up as a virus now in the zip file first time nbminer is come up as a virus tut tut , chinese getting us all back.

so why does it come up as a virus now in the zip file first time nbminer is come up as a virus tut tut , chinese getting us all back.


so why does it come up as a virus now in the zip file first time nbminer is come up as a virus tut tut , chinese getting us all back.

so why does it come up as a virus now in the zip file first time nbminer is come up as a virus tut tut , chinese getting us all back.

no answer then?

[miner29]

so why does it come up as a virus now in the zip file first time nbminer is come up as a virus tut tut , chinese getting us all back.

so why does it come up as a virus now in the zip file first time nbminer is come up as a virus tut tut , chinese getting us all back.


so why does it come up as a virus now in the zip file first time nbminer is come up as a virus tut tut , chinese getting us all back.

so why does it come up as a virus now in the zip file first time nbminer is come up as a virus tut tut , chinese getting us all back.

no answer then?

Um...just ran both linux and windows version through virustotal comes out clean.

https://github.com/NebuTech/NBMiner/releases/download/v39.0/NBMiner_39.0_Linux.tgz

https://github.com/NebuTech/NBMiner/releases/download/v39.0/NBMiner_39.0_Win.zip

If you are uncomfortable with it...dont use it.

[erkange]

New version v39.0 comes with half-unlock LHR hashrate

Great news!
Does it work on all LHR cards?
Can you tell us some examples hashrates?

Graphic Card : Palit RTX3060 DUAL OC 12GB 192Bit GDDR6 (LHR2)
Device ID : 2504
PCI-E RiserCard
OS : HiveOS
Nvidia Driver : 460.84

OC Conf : Fan/80 Core/0 MClock/2100 PL/110 Stabil 53C 32 mh/s

Amazing Job

Thanks for post.
110 means power watt or?

[Squezzi55]

Guys do NBminer has some kind of memory tweaking for Rx Vega 56 and 64 GPUs? I prefer using NBminer but when I switched from Teamred miner to NBminer I lost significant amount of hashrate

[eptimul]

New version v39.0 comes with half-unlock LHR hashrate

Great news!
Does it work on all LHR cards?
Can you tell us some examples hashrates?

Graphic Card : Palit RTX3060 DUAL OC 12GB 192Bit GDDR6 (LHR2)
Device ID : 2504
PCI-E RiserCard
OS : HiveOS
Nvidia Driver : 460.84

OC Conf : Fan/80 Core/0 MClock/2100 PL/110 Stabil 53C 32 mh/s

Amazing Job

Thanks for post.
110 means power watt or?

Turkish Lang.
Dostum 110W altina indirdigim zaman hashratte dusus oluyor. Birde elimde guc kaynagi 1200W. 3 tane 3080 3 tane 3060  var. 998W tuketimim var. 3060lara 110W fazla versem muhtemelen 36mh/s lere rahatlikla ulasabilecegim. Ama Guc kaynagini zorlamak istemiyorum. Aklina birsey takilirsa sorabilirsin. Elimden geldigince yardimci olurum.

Eng Lang.
Hello my friend. when I reduce it below 110W, the hashrate drops. My Power supply is 1200W. There are 3/rtx3080s and 3/rtx3060s. I have 998W consumption. I will be able to easily reach 36mh/s maybe 38mh/s in a lot of regions with 120W/125W to 3060s. But I don't want to force the Power supply. If you have anything on your mind, you can ask. I'll help when I can

[gfcpinto]

Doing Ergo/Autolykos through Nicehash pool (NBMiner 39.0/Win10);

And I keep getting this:

[01:47:37] INFO - ergo - #105 Share rejected: {"error":[5,"Invalid extranonce2 size."]}, 180 ms. [DEVICE 0, #105]
[01:47:47] INFO - ergo - #106 Share rejected: {"error":[5,"Invalid extranonce2 size."]}, 179 ms. [DEVICE 0, #106]
[01:47:57] INFO - ergo - #107 Share rejected: {"error":[5,"Invalid extranonce2 size."]}, 180 ms. [DEVICE 0, #107]
[01:48:03] INFO - ergo - #108 Share rejected: {"error":[5,"Invalid extranonce2 size."]}, 179 ms. [DEVICE 0, #108]
[01:48:06] INFO - ergo - #109 Share rejected: {"error":[5,"Invalid extranonce2 size."]}, 180 ms. [DEVICE 0, #109]

At 45ish% rejects on my desktop;
At 75% rejects on my rig!
1. Is there a way to fix this?;
2. Or at least an explanation of why is this happening? Can't understand what I've found so far.

Thank you in advance