juanlondon
Newbie
 Offline
Activity: 3
Merit: 0
|
 |
March 25, 2015, 12:38:05 PM |
|
Thanks BitmainWarranty working at full flow...
110935 Open 4 minutes 15.08 Ph/s 1.05 Th/s 46717549644 54272 0.007% 0 (0%) 821549333
110934 2015-03-25 12:32:48 11 minutes 15.91 Ph/s 925.23 Gh/s 46717549644 145408 0.006% 0 (0%) 2500000863
110933 2015-03-25 12:21:34 11 minutes 16.42 Ph/s 928.04 Gh/s 46717549644 141312 0.006% 2048 (1.43%) 2500000825
110932 2015-03-25 12:10:40 11 minutes 16.62 Ph/s 946.34 Gh/s 46717549644 142336 0.006% 1024 (0.71%) 2500000231
110931 2015-03-25 11:59:54 11 minutes 16.54 Ph/s 975.85 Gh/s 46717549644 147456 0.006% 1024 (0.69%) 2500000332
110930 2015-03-25 11:49:05 11 minutes 16.49 Ph/s 1.01 Th/s 46717549644 152576 0.006% 1024 (0.67%) 2500002512
110929 2015-03-25 11:38:14 11 minutes 16.44 Ph/s 922.72 Gh/s 46717549644 140288 0.006% 2048 (1.44%) 2500001785
110928 2015-03-25 11:27:21 11 minutes 16.34 Ph/s 997.43 Gh/s 46717549644 152576 0.006% 1024 (0.67%) 2500000151
110927 2015-03-25 11:16:24 11 minutes 16.37 Ph/s 1.03 Th/s 46717549644 156672 0.006% 0 (0%) 2500000119
anyone with a good suggestion in pool?
regards
Juan
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you want to be a moderator, report many posts with accuracy. You will be noticed.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
quakefiend420
Legendary
Offline
Activity: 784
Merit: 1000
|
|
March 25, 2015, 03:38:30 PM |
|
NO new news..... Nothing... Niente...Nihil...Nein... NADA,無, 没有...  Hey BitmainWarranty, any news coming soon on the upgrade kit?  Aww.  All my S2s are shut down now, they suck more than they make... |
|
|
|
|
|
Meech
|
|
March 25, 2015, 06:13:10 PM |
|
NO new news..... Nothing... Niente...Nihil...Nein... NADA,無, 没有... Hey BitmainWarranty, any news coming soon on the upgrade kit? Aww. All my S2s are shut down now, they suck more than they make... Ya, that's why we keep bugging them. A little to late for this info I'm afraid. Come on step it up please. |
|
|
|
|
|
Meech
|
|
March 27, 2015, 03:50:02 AM |
|
What size screws are used on the S2 case? Have a few needing replacement.  |
|
|
|
|
Prelude
Legendary
Offline
Activity: 1596
Merit: 1000
|
|
March 27, 2015, 04:09:00 AM |
|
What size screws are used on the S2 case? Have a few needing replacement. Just take one to your local hardware store and match the thread and length. |
|
|
|
|
adaseb
Legendary
Offline
Activity: 3752
Merit: 1710
|
|
March 27, 2015, 04:37:49 AM |
|
If any of you would like your S2 to be more quiet then turn the exhaust fans the other way so they become intake fans and remove the case.
The miner is pretty much silent now compared to before where it sounded like a jet.
|
|
|
|
juanlondon
Newbie
Offline
Activity: 3
Merit: 0
|
|
March 30, 2015, 10:48:51 AM |
|
If any of you would like your S2 to be more quiet then turn the exhaust fans the other way so they become intake fans and remove the case.
The miner is pretty much silent now compared to before where it sounded like a jet.
cool which range of temperatures are you running? regards |
|
|
|
|
adaseb
Legendary
Offline
Activity: 3752
Merit: 1710
|
|
March 30, 2015, 02:20:48 PM |
|
If any of you would like your S2 to be more quiet then turn the exhaust fans the other way so they become intake fans and remove the case.
The miner is pretty much silent now compared to before where it sounded like a jet.
cool which range of temperatures are you running? regards They are about 5C lower but I noticed that the temp sensor is located to the end of the original exhaust side so the readings might not be accurate. |
|
|
|
fullzero
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
April 01, 2015, 06:43:02 PM |
|
I'm looking for an S2 controller blade. If anyone has a working one they are willing to part with please pm me. Thanks
|
|
|
|
|
|
|
|
Meech
|
|
April 05, 2015, 04:39:25 AM |
|
What size screws are used on the S2 case? Have a few needing replacement. Just take one to your local hardware store and match the thread and length. Most hardware giants don't deal with tiny screws still searching. I guess I will put a ticket in with the big B. |
|
|
|
|
swilla
Member
Offline
Activity: 77
Merit: 10
|
|
May 12, 2015, 04:52:17 PM |
|
Can anyone tell me if a 750w psu would be able to run an s2 with just 5 or 6 hashing boards? The reason I ask is because I recently bought one off ebay. It ran fine for ~ a week. Yesterday the psu caught fire, so I took it out and am now waiting on a new one. I have a 750 running an s3 and I'm just trying to maximize my potential. Any input is appreciated.
|
|
|
|
|
MikeMike
Legendary
Offline
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
|
|
May 12, 2015, 05:11:22 PM |
|
Can anyone tell me if a 750w psu would be able to run an s2 with just 5 or 6 hashing boards? The reason I ask is because I recently bought one off ebay. It ran fine for ~ a week. Yesterday the psu caught fire, so I took it out and am now waiting on a new one. I have a 750 running an s3 and I'm just trying to maximize my potential. Any input is appreciated.
Check the data on the PSU. Make sure the 12v rails have enough 12v capacity. Just because a PSU says 750W does not mean the 12v rails will provide a full 750W. The newer ones do list them as such but most older ones is a "total of all" the various voltages... Check out Server PSUs on ebay for replacements rather than desktop PSUs. If you have a bunch of 12V miners running on PSUs PM me and I will get you some info. MM |
|
|
|
swilla
Member
Offline
Activity: 77
Merit: 10
|
|
May 12, 2015, 05:22:23 PM |
|
Can anyone tell me if a 750w psu would be able to run an s2 with just 5 or 6 hashing boards? The reason I ask is because I recently bought one off ebay. It ran fine for ~ a week. Yesterday the psu caught fire, so I took it out and am now waiting on a new one. I have a 750 running an s3 and I'm just trying to maximize my potential. Any input is appreciated.
Check the data on the PSU. Make sure the 12v rails have enough 12v capacity. Just because a PSU says 750W does not mean the 12v rails will provide a full 750W. The newer ones do list them as such but most older ones is a "total of all" the various voltages... Check out Server PSUs on ebay for replacements rather than desktop PSUs. If you have a bunch of 12V miners running on PSUs PM me and I will get you some info. MM The psu I have is a Corsair CXM Series CX750. On the +12v rail it is 62 amp 744 watts. I'm just wondering if it will run 5 or 6 of the boards until my new supply comes in, which according to ebay won't be for about a week and a half. I guess maybe I should have asked what the wattage of each board is? |
|
|
|
|
MikeMike
Legendary
Offline
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
|
|
May 12, 2015, 05:41:13 PM |
|
Can anyone tell me if a 750w psu would be able to run an s2 with just 5 or 6 hashing boards? The reason I ask is because I recently bought one off ebay. It ran fine for ~ a week. Yesterday the psu caught fire, so I took it out and am now waiting on a new one. I have a 750 running an s3 and I'm just trying to maximize my potential. Any input is appreciated.
Check the data on the PSU. Make sure the 12v rails have enough 12v capacity. Just because a PSU says 750W does not mean the 12v rails will provide a full 750W. The newer ones do list them as such but most older ones is a "total of all" the various voltages... Check out Server PSUs on ebay for replacements rather than desktop PSUs. If you have a bunch of 12V miners running on PSUs PM me and I will get you some info. MM The psu I have is a Corsair CXM Series CX750. On the +12v rail it is 62 amp 744 watts. I'm just wondering if it will run 5 or 6 of the boards until my new supply comes in, which according to ebay won't be for about a week and a half. I guess maybe I should have asked what the wattage of each board is? An S2 PSU is 1100W correct? 10-blades = 110W x6 blades = 660W So yes and just run it on 5 blades if it does not. |
|
|
|
|
Meech
|
|
May 12, 2015, 06:14:02 PM |
|
Can anyone tell me if a 750w psu would be able to run an s2 with just 5 or 6 hashing boards? The reason I ask is because I recently bought one off ebay. It ran fine for ~ a week. Yesterday the psu caught fire, so I took it out and am now waiting on a new one. I have a 750 running an s3 and I'm just trying to maximize my potential. Any input is appreciated.
Check the data on the PSU. Make sure the 12v rails have enough 12v capacity. Just because a PSU says 750W does not mean the 12v rails will provide a full 750W. The newer ones do list them as such but most older ones is a "total of all" the various voltages... Check out Server PSUs on ebay for replacements rather than desktop PSUs. If you have a bunch of 12V miners running on PSUs PM me and I will get you some info. MM The psu I have is a Corsair CXM Series CX750. On the +12v rail it is 62 amp 744 watts. I'm just wondering if it will run 5 or 6 of the boards until my new supply comes in, which according to ebay won't be for about a week and a half. I guess maybe I should have asked what the wattage of each board is? An S2 PSU is 1100W correct? 10-blades = 110W x6 blades = 660W So yes and just run it on 5 blades if it does not. They all come with 1050w Gold psu's and typical draw is 1060w total at wall. These psu's are under rated so they do fine maintaing this draw. 10 blades + controller + fans + lcd. Figure 90w+ per each of the 10 cards. |
|
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
|
May 15, 2015, 05:16:51 AM |
|
How about some news on the S2 Upgrade kits ? Has that plan been abandoned ?
It has been quite some time since news has been posted about that development. Still have an S2 kicking around, collecting dust, because an upgrade path was (still is ?) in-the-works.
|
|
|
|
|
quakefiend420
Legendary
Offline
Activity: 784
Merit: 1000
|
|
May 15, 2015, 07:58:40 AM |
|
How about some news on the S2 Upgrade kits ? Has that plan been abandoned ?
It has been quite some time since news has been posted about that development. Still have an S2 kicking around, collecting dust, because an upgrade path was (still is ?) in-the-works.
I've been asking for months. Seems they'd rather sell more of their last gen chips in the S4+ and invent PSUs with cheap wiring. |
|
|
|
|
|
mewhoyou
|
|
May 16, 2015, 01:27:59 PM |
|
Guy,
am pulling PSU from my S2 to power my PC but i cant find 5 pin to HDD power line. Anyone know where I can find some?
|
Ethereum the Next Big Thing?
|
|
|
|
Bicknellski
|
|
May 16, 2015, 01:41:15 PM |
|
How about some news on the S2 Upgrade kits ? Has that plan been abandoned ?
It has been quite some time since news has been posted about that development. Still have an S2 kicking around, collecting dust, because an upgrade path was (still is ?) in-the-works.
Is there not a thread for that? S2 Upgrade InformationUgg. Everywhere we look ANTIMINER this and that. No wonder no one can find anything. |
|
|
|
|
