The Habanero - 650GH/s - OOS

[Taugeran]

If it actually creates a config file. Open it and see if it's contents are valid JSON.  Use JSONLint or the like.

It may be that the config became corrupted and reading the corrupted config to write changes is whats segfaulting cgminer.

My $0.02

[1714516790]

1714516790

[Swimmer63]

Config file is blank.  I'm going to send you a pm.

[gateway]

If anyone here on the forum is still interested in buying some Habaneros hit me up please.

[GenTarkin]

how much?

[gateway]

how much?

send me a pm on how many you want and ill get back on a price.. we only have a few left so trying to get them out of my stock room and clear up some space

[MrTeal]

New PCBs stopped in for a brief visit before being sent off for assembly.


It'll be interesting to see how they perform. Early tests on modded Habs have shown that even in a 4 phase configuration these will still hit 900MHz+ even using the less efficient and smaller backplate on the boards.

Hopefully we can work with what's left of HF to get some chips mounted on these and get them out and mining.

[Taugeran]

@MrTeal. I remember someone saying HF was considering instead of a 4 die chip, making a single die chip. Any insight on that?

[MrTeal]

@MrTeal. I remember someone saying HF was considering instead of a 4 die chip, making a single die chip. Any insight on that?

If there has ben work towards that, I haven't heard about it yet.

[SVK]

Any approximate availability date ?? 

Did you have a time to have a look at your stock for me ?

Thank you

[Minor Miner]

@MrTeal. I remember someone saying HF was considering instead of a 4 die chip, making a single die chip. Any insight on that?

If there has ben work towards that, I haven't heard about it yet.

they have done work on it.   It is the current chip cut into four and they started designing a board too since apparently it can get the costs way down.    I am sure eduardo would tell you about it.   This might be a great thing for you to take up and design a board for.

[Taugeran]

Design dance floor has opened: http://hashfast.com/wp-content/uploads/2014/04/Golden-Nonce.rev1_.2.pdf

http://hashfast.com/wp-content/uploads/2014/04/GN-Interface-Protocol-Guide.pdf

[cedivad]

they have done work on it.   It is the current chip cut into four and they started designing a board too since apparently it can get the costs way down.    I am sure eduardo would tell you about it.   This might be a great thing for you to take up and design a board for.

This post needs it's own topic. Promoting it can't hurt.

[MrTeal]

Taking off my Peppermining hat here, I'm selling some of my personal boards to make room for the new test boards when they arrive.
https://bitcointalk.org/index.php?topic=763154.0
They're all pretty good performers, using a Swiftech H220 with upgraded fans. $450 each or all 6 for $2500.

[QuiveringGibbage]

better late than never..

https://bitcointalk.org/index.php?topic=739559.0 ([eBay] Dual Habanero 1.3THs in Sydney, Australia (Start $0.99))

Cheers,
QG

[gateway]

End of Summer Sale for Habaneros.. $380 + shipping.. get yours now, very limited supply... https://peppermining.com/shop/the-habanero/

[xjack]

Devs, need a little guidance on one of my habs.  This particular Hab took a bit of a fall a few weeks ago, but has been limping along perfectly.

Short version - this card has one broken die, and one usb ripped out, but was still hashing flawless for weeks at 925mhz~575gh/s. 

I had a 5 second blackout this morning, and now the device cycles hotplug:

 [2014-09-05 19:40:25] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:40:32] HFA: Found device with name Dabs
 [2014-09-05 19:40:32] Hotplug: Hashfast added HFA 1
 [2014-09-05 19:40:41] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:40:59] HFA: Found device with name Dabs
 [2014-09-05 19:40:59] Hotplug: Hashfast added HFA 2
 [2014-09-05 19:41:08] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:41:15] HFA: Found device with name Dabs
 [2014-09-05 19:41:15] Hotplug: Hashfast added HFA 3
 [2014-09-05 19:41:24] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:41:41] HFA: Found device with name Dabs
 [2014-09-05 19:41:41] Hotplug: Hashfast added HFA 4
 [2014-09-05 19:41:50] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:41:57] HFA: Found device with name Dabs
 [2014-09-05 19:41:57] Hotplug: Hashfast added HFA 5

All other equipment on that circuit is flawless, including another hab at 950Mhz~725gh/s.

Has Dabs passed away?  Is there any troubleshooting I can do? 

[MrTeal]

Devs, need a little guidance on one of my habs.  This particular Hab took a bit of a fall a few weeks ago, but has been limping along perfectly.

Short version - this card has one broken die, and one usb ripped out, but was still hashing flawless for weeks at 925mhz~575gh/s.  

I had a 5 second blackout this morning, and now the device cycles hotplug:

 [2014-09-05 19:40:25] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:40:32] HFA: Found device with name Dabs
 [2014-09-05 19:40:32] Hotplug: Hashfast added HFA 1
 [2014-09-05 19:40:41] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:40:59] HFA: Found device with name Dabs
 [2014-09-05 19:40:59] Hotplug: Hashfast added HFA 2
 [2014-09-05 19:41:08] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:41:15] HFA: Found device with name Dabs
 [2014-09-05 19:41:15] Hotplug: Hashfast added HFA 3
 [2014-09-05 19:41:24] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:41:41] HFA: Found device with name Dabs
 [2014-09-05 19:41:41] Hotplug: Hashfast added HFA 4
 [2014-09-05 19:41:50] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:41:57] HFA: Found device with name Dabs
 [2014-09-05 19:41:57] Hotplug: Hashfast added HFA 5

All other equipment on that circuit is flawless, including another hab at 950Mhz~725gh/s.

Has Dabs passed away?  Is there any troubleshooting I can do?  

I would try each die individually, just to see if there might have been some other damage to another die that just didn't appear until this latest thermal cycle.

[xjack]

Devs, need a little guidance on one of my habs.  This particular Hab took a bit of a fall a few weeks ago, but has been limping along perfectly.

Short version - this card has one broken die, and one usb ripped out, but was still hashing flawless for weeks at 925mhz~575gh/s.  

I had a 5 second blackout this morning, and now the device cycles hotplug:

 [2014-09-05 19:40:25] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:40:32] HFA: Found device with name Dabs
 [2014-09-05 19:40:32] Hotplug: Hashfast added HFA 1
 [2014-09-05 19:40:41] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:40:59] HFA: Found device with name Dabs
 [2014-09-05 19:40:59] Hotplug: Hashfast added HFA 2
 [2014-09-05 19:41:08] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:41:15] HFA: Found device with name Dabs
 [2014-09-05 19:41:15] Hotplug: Hashfast added HFA 3
 [2014-09-05 19:41:24] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:41:41] HFA: Found device with name Dabs
 [2014-09-05 19:41:41] Hotplug: Hashfast added HFA 4
 [2014-09-05 19:41:50] HFA : OP_USB_INIT failed! Operation status 6 (All cores failed diagnostics)
 [2014-09-05 19:41:57] HFA: Found device with name Dabs
 [2014-09-05 19:41:57] Hotplug: Hashfast added HFA 5

All other equipment on that circuit is flawless, including another hab at 950Mhz~725gh/s.

Has Dabs passed away?  Is there any troubleshooting I can do?  

I would try each die individually, just to see if there might have been some other damage to another die that just didn't appear until this latest thermal cycle.

Thanks for the suggestion, it worked.  Got a few weird busy errors when adjusting the per-die settings.  Looks like the FW settings were borked.

Reflashed FW, rewrote hftool.py settings, and it's back up and running.  Thanks!

[jerbin]

Selling my condo so the rig needs to go.

Habanero Board - $300 + Shipping
or
For all 7 Habanero Boards - $2000 + Shipping

Payment in BTC

PM ME if you are interested.

[ZiG]

Selling my condo so the rig needs to go.

Habanero Board - $300 + Shipping
or
For all 7 Habanero Boards - $2000 + Shipping

Payment in BTC

PM ME if you are interested.

Whwre are you shipping from...Location...

ZiG