⛏Team Black Miner (ETHB3 ETHW ETC VTC KAWPOW FIROPOW ZIL +dual +tripple mining )

[sp_]

miningpoolhub is better than other pools now?

no, but some pools need low --xintensity. nicehash.com has 10% rejected shares with --xintensity -1. 1.8% rejected with --xintensity 32 .
flexpool.io give a penalty for stale shares so you need to mine with --xintensity 8 or 16.  The ethereum network is paying for stale work (uncle blocks) so when a pool rejects them, they either steal your money or divide the mined money wrong.

Rtx 3090 --xintensity -1 can give up to 135MHASH
Rtx 3090 --xintensity 8 can give up to 115MHASH (?)

20MHASH wasted on a pool that doesn't compensate the work you do.

etheremine, nanopool, f2pool, sparkpool etc all good.

[tsojin]

"recommended settings" core clock 1400 - memclock 2150 (running at 2140)
same as before 10min run / at least 2 shares
Team Red 'config A544' - 38.83 / autoconfig(A672) - 53.65
v1.02 still
Xintensity =  -1: 64.61 - 165w
Xintensity =   1: 58.90 - 157w
Xintensity =  12: 62.92 - 162w
Xintensity =  24: 63.11 - 164w
Xintensity =  36: 63.77 - 165w
Xintensity =  48: 65.21 - 167w
Xintensity =  78: 65.51 - 167w
Xintensity = 128: 65.71 - 167w
Xintensity = 240: 65.66 - 167w
Xintensity = 360: 65.80 - 168w
Xintensity = 512: 65.92 - 170w
no invalid shares

Looking to try and update the bios to increase the max memclock, if I can get it to work will post another set of config/test

What is the look back on the average hash? It seems to fluctuate alot more then I would think an average should at the 10 minute mark

etheremine, nanopool, f2pool, sparkpool etc all good.

2miners also pays uncle blocks (don't really endorse them but fyi)

[sp_]

v1.02 still

Thanks for testing. you should use the new version v1.04 because it has more checks like cpu verification of the dagfile. This is useful when overclocking. The average function take the average of x jobs sent to the gpu. low intensities have a larger x, but if a job is small the average will fluctate more. Perhaps better to display the 10min average here in the future versions.

[tsojin]

v1.02 still

Thanks for testing. you should use the new version v1.04 because it has more checks like cpu verification of the dagfile. This is useful when overclocking. The average function take the average of 200 jobs sent to the gpu. if a job is small the average will fluctate more. Perhaps better to display the 10min average here in the future versions.

Yeah I didn't see the new version till I was a little way through it, the hashes are the highest average seen in the 8-10min range, but the fluctuation were only about 1-1.5

[sabercrypto]

miningpoolhub is better than other pools now?

no, but some pools need low --xintensity. nicehash.com has 10% rejected shares with --xintensity -1. 1.8% rejected with --xintensity 32 .
flexpool.io give a penalty for stale shares so you need to mine with --xintensity 8 or 16.  The ethereum network is paying for stale work (uncle blocks) so when a pool rejects them, they either steal your money or divide the mined money wrong.

Rtx 3090 --xintensity -1 can give up to 135MHASH
Rtx 3090 --xintensity 8 can give up to 115MHASH (?)

20MHASH wasted on a pool that doesn't compensate the work you do.

etheremine, nanopool, f2pool, sparkpool etc all good.

wow thanks for the info i didnt know this. i'll change to ethermine i guess

[dedizonesv2]

1.03 cuda 11.2 - still missing from miningpoolhub.

fixed in v1.04. The profit is amazing @ miningpoolhub

miningpoolhub is better than other pools now?

see here better pool rentability: https://www.miningpoolsprofits.com/


for information i sugest admin hiveos add miner in hiveos, in progress

https://bitcointalk.org/index.php?topic=2350786.msg57926484#msg57926484

[sp_]

see here better pool rentability: https://www.miningpoolsprofits.com/

Miningpoolhub, Crazypool and ethermine and many others pay the full reward for a stale share. So if the Team Black Miner is configured to produce some stales (--xintensity High or -1(autotune)), you get payed for the extra MHASH'es it produces. Flexpool expects under 1% stale shares, so if you feed them 5% stale , you get 4% less return. Other pools pay a reduced reward for stales. F.ex ezil.me has 70% reward for a stale shares.

The Team Black Miner has the lowest fee of 0.5%, and created by trusted opensource devs with a long track record. Move your rigs over to us, and we will give you more profit.

[Jonasuke]

Hello,

Thank you for your software

Do you have tutorial for install TeamBlackminer on Hiveos?
i dont see list of miner.

Best regards

[sp_]

Why don't you ask in the Hiveos thread. Right now ubuntu 18.4 linux and windows 10 is up to +10% more profitable than hiveos.

You just need to run

The Team Black Miner v1.04


rtx 3090: ~135MHASH
rtx 3080: ~102MHASH
rtx 3070: ~64MHASH
rtx 3060ti: ~63MHASH
rtx 3060: ~52MHASH
rtx: 2060: ~34MHASH


Download, select a poolscript, change the wallet adress, click and mine. Voila
Overclock in MSI afterburner.

[somaton]

1.04 is working fine now with miningpoolhub, thanks.
Testing --xintensity 32 now, had some stales with default (64). 48 is not working (error: GPU0 Dag verification failed. Exiting...). Had 0 stales in weeks with trex.

[sp_]

Some pools pay the same for stale shares as normal shares. This is because the ethereum blockchain reward stale work as well. (uncle blocks) On miningpoolhub use --xintensity -1 for a boost in hashrate and profit. The stale shares in the mining window is not reported by the pool, but calculated by the miner.

[FomoMiner]

hi, noob here.
good news for gpu mining community, seems promising (especially the maybe coming "lhr FULL unlock"  ). I'm interested to test it.

I just have a very noob question(s) if someone is not too bothered to answer it:

on the bat file like this one:

Set ETH_WALLET=0x59Aa6EAfb389E814441D02Ba6EF33c10726e4B16

:loop
   TBMiner --algo ethash --hostname eu1.ethermine.org --port 4444 --wallet %ETH_WALLET% --worker_name %computername%
   timeout 10
goto :loop

What is the first line for ? do we have to edit it ? is it for dev feees so we have to not touch it ?
I've read few times you guys speaking about CUDA versions,same in the Miner Requirements in ReadMe file (Cuda 11.2 and 11.4 only): so do we have to install Cuda toolkit ?

thanks

[somaton]

with --xintensity -1 even more stales, and 3070 started to get bad shares, have to lower memory oc. Will do more tests, preffer to not get any stales like i had with trex, or at least near 0.

76m [2021-09-14 21:32:28.141] ID   BOARD   TYPE   HASHRATE/W   HASHRATE   AVERAGE      SHARES
76m [2021-09-14 21:32:28.141] GPU0   3070   Cuda   527.65 kH/W   64.90 MH/s   64.47 MH/s   16/3/3 (84.21)
76m [2021-09-14 21:32:28.141] GPU1   3060Ti   Cuda   475.88 kH/W   64.24 MH/s   64.25 MH/s   21/0/4 (100.00)
76m [2021-09-14 21:32:28.141] GPU2   3060   Cuda   475.49 kH/W   50.88 MH/s   50.86 MH/s   14/0/3 (100.00)
76m [2021-09-14 21:32:28.141]          1479.01 kH/s   180.02 MH/s   179.58 MH/s   51/3/10 (94.44)

typo? GPU0 Cpu verification failed. Share not sendt to pool. Rejected!

[dedizonesv2]

Why don't you ask in the Hiveos thread. Right now ubuntu 18.4 linux and windows 10 is up to +10% more profitable than hiveos.

You just need to run

The Team Black Miner v1.04


rtx 3090: ~135MHASH
rtx 3080: ~102MHASH
rtx 3070: ~64MHASH
rtx 3060ti: ~63MHASH
rtx 3060: ~52MHASH
rtx: 2060: ~34MHASH


Download, select a poolscript, change the wallet adress, click and mine. Voila
Overclock in MSI afterburner.

for information i sugest admin hiveos add miner in hiveos, in progress

https://bitcointalk.org/index.php?topic=2350786.msg57926484#msg57926484

[sp_]

with --xintensity -1 even more stales, and 3070 started to get bad shares, have to lower memory oc. Will do more tests, preffer to not get any stales like i had with trex, or at
typo? GPU0 Cpu verification failed. Share not sendt to pool. Rejected!

With the Team black kernel you can increase the performance by reducing the clocks and increase the --xintensity. Run Nvidiaprofile inspector and disable force P2 state, and then retune your rig. For RTX cards: Low coreclock, increase the TDP (powerlimit) high memclock. increasing from 65% tdp to 67% tdp can gain a few MHASH compared to the other miners.

Set ETH_WALLET=
What is the first line for ?

Insert your wallet adress here

[moderator's note: consecutive posts merged]

[birdjan]

Please,can You add support for huobipool.There is no mining fee and no withdraw fee from the pool?

[sp_]

with --xintensity -1 even more stales, prefer to not get any stales like i had with trex, or at least near 0.

Stale shares aren't a problem if you mine on the right pool. etheremine.org,  miningpoolhub and many other pools pay you the same for stale and normal shares.
Some pools give a penalty on stales and even rejects, so we might case on the pool name and insert better defaults.
--xintensity -1 on flexpool or nicehash give a poor result. You need --xintensity 32 or lower. Note that some pools will disconnect you if you have more than 5% stale.


But then the hashrate of the 3070 will be pool dependent. Mine on etheremine get 65MHASH, mine on flexpool get 62MHASH 

76m [2021-09-14 21:32:28.141] ID   BOARD   TYPE   HASHRATE/W   HASHRATE   AVERAGE      SHARES
76m [2021-09-14 21:32:28.141] GPU0   3070   Cuda   527.65 kH/W   64.90 MH/s   64.47 MH/s   16/3/3 (84.21)
76m [2021-09-14 21:32:28.141] GPU1   3060Ti   Cuda   475.88 kH/W   64.24 MH/s   64.25 MH/s   21/0/4 (100.00)
76m [2021-09-14 21:32:28.141] GPU2   3060   Cuda   475.49 kH/W   50.88 MH/s   50.86 MH/s   14/0/3 (100.00)
76m [2021-09-14 21:32:28.141]          1479.01 kH/s   180.02 MH/s   179.58 MH/s   51/3/10 (94.44)

typo? GPU0 Cpu verification failed. Share not sendt to pool. Rejected!

Typo fixed in the next upcoming version v1.05


The Team Black miner V1.04 with improved opencl speed, have some reports of higher profit on the newer AMD cards. Try it out!

6600xt 34MHASH
5700xt 58MHASH

But the power usage is up slightly. You can reduce it with a lower --xintensity.



Stats for AMD added on windows with temp control on the gpu like TBMiner on nvidia. If the gpu gets to hot, let is sleep for x seconds. More work needed on the linux version.
Note that v1.04 have some issues when running mixed AMD and NVIDIA in the rig. So better to use the --amd-only or --cuda-all-devices.

v1.05 Coming soon...

[moderator's note: consecutive posts merged]

[swogerino]

Stats for AMD added on windows with temp control on the gpu like TBMiner on nvidia. If the gpu gets to hot, let is sleep for x seconds. More work needed on the linux version.
Note that v1.04 have some issues when running mixed AMD and NVIDIA in the rig. So better to use the --amd-only or --cuda-all-devices.

v1.05 Coming soon...

Hopefully mixed rigs are fixed in the upcoming versions,the only reason I have not switched to your miner is just that I have mixed cards 3 AMD and 2 NVIDIA cards and with them right now I do 280-287 Mhsh depending on GPU temps,with your values I can do almost 300 Mhsh which is a big improvement in hash rate so looking forward to try your upcoming versions where mixed rigs run perfectly fine.

[sp_]

v1.05 beta has been released (cuda 11.4 / windows only)

1. Fixed bugs in short options
2. Fixed cuda stats for -U [x,x]
3. Fixed indexproblem/crash at startup in mixed AMD/NVIDIA rigs.
4. Fixed ethereum classic cuda mining on miningpoolhub
5. Reduced stales with xintensity -1 cuda
6. Stats for AMD including temp control (watt to be added later)



https://github.com/sp-hash/TeamBlackMiner/releases/tag/v1.05
TeamBlackMiner_1_05_cuda_11_4_beta.7z
https://www.virustotal.com/gui/file/3f7acd7cb9b67c9f2091f8d30f26c06d3f5d392977ddc2d267088c404a5d3640
10 false positives on virustotal (The t-rex miner has 28 positive on virus total)


12hour test run on ezil.me

rtx 2060 mobile default cuda settings (--xintensity 64)



Seems to be working here on multiplatform rigs. Mixed AMD/NVIDIA. Is everything running ok on your rigs?

Watt and board name is still missing for AMD cards in this beta release.

here is 1 rx580 together with nvidia cards.




[moderator's note: consecutive posts merged]

[rainbowminer]

Good work! I have updated RainbowMiner with the new beta and will start testing asap.

Question in advance:

Some pools give a penalty on stales and even rejects, so we might case on the pool name and insert better defaults.
--xintensity -1 on flexpool or nicehash give a poor result. You need --xintensity 32 or lower. Note that some pools will disconnect you if you have more than 5% stale.

Does this still apply? Or did you optimize the --xintensity -1 in a way, so that I don't need to take care about the fixed xintensity settings for Nicehash and Flexpool anymore?