⛏Team Black Miner (ETHB3 ETHW ETC VTC KAWPOW FIROPOW ZIL +dual +tripple mining )

[sp_]

Does this still apply? Or did you optimize the --xintensity -1 in a way, so that I don't need to take care about the fixed xintensity settings for Nicehash and Flexpool anymore?

In v1.05 beta, the stale shares are reduced to half with (--xintensity -1). I think nicehash and flexpool still need --xintensity below 32.  You need to run it and check the reject rates / stales. If you get many Job not found rejected shares, the --xintensity is too high. For now this miner works best with pools that pay for stale shares and don't reject them. Uncle blocks are important for the security of the ethereum blockchain. Pools and mining software that filter them out could potentially break the chain.

[crazydane]

Looks very promising.  Any ETA on when API support will be added?  I think Patrik is waiting on that before adding this miner to Awesome Miner.

[sp_]

https://github.com/sp-hash/TeamBlackMiner/releases/

TeamBlackMiner_1_05_cuda_11_2.7z
SHA-256   a335c5d6534f1f376c7f2f3e3c9af0717654386115fb65a2fb0e913d82236de3

TeamBlackMiner_1_05_cuda_11_4.7z
SHA-256   7ca9ff4fe99cd26fdb89c73db4cf913a20023801c68208172411288e6fc0361e

v1.05
1. Fixed bugs in short options
3. Fixed cuda stats for -U [x,x]
2. Fixed indexproblem/crash at startup in mixed AMD/NVIDIA rigs.
4. Fixed ethereum classic cuda mining on miningpoolhub
5. Reduced stales cuda/opencl
6. Stats for AMD including temp control
7. Fixed calculation error in consumption
8. Fixed error in share submit time

[jims111]

https://github.com/sp-hash/TeamBlackMiner/releases/

TeamBlackMiner_1_05_cuda_11_2.7z
SHA-256   a335c5d6534f1f376c7f2f3e3c9af0717654386115fb65a2fb0e913d82236de3

TeamBlackMiner_1_05_cuda_11_4.7z
SHA-256   7ca9ff4fe99cd26fdb89c73db4cf913a20023801c68208172411288e6fc0361e

v1.05
1. Fixed bugs in short options
3. Fixed cuda stats for -U [x,x]
2. Fixed indexproblem/crash at startup in mixed AMD/NVIDIA rigs.
4. Fixed ethereum classic cuda mining on miningpoolhub
5. Reduced stales cuda/opencl
6. Stats for AMD including temp control
7. Fixed calculation error in consumption
8. Fixed error in share submit time

Try 1.05 work fine but memory temp still can't display correctly with 3090 & 3080

[sp_]

Try 1.05 work fine but memory temp still can't display correctly with 3090 & 3080

I think you need the latest drivers.

Can you open a command prompt and type:

nvidia-smi --query-gpu=temperature.memory --format=csv

do you get N/A ?

[somaton]

Like somebody already mentioned, you have to do something with "Dag verification failed. Exiting...". Tried to move one more rig to your miner, but cant because of that error. Same gpu is working fine with trex with very low rejects rate and without any crashes. Tried to lower memory oc from 1150 to 950 and still same (msi 3070).

[sp_]

 Try to run with coreclock -200, and add 2% more power

edit: Actually you need retune the rig to gain a few MHASH'es. The t-rex kernel was optimized by me to run good on the gtx 750ti (2014) Same clocks and settings doesn't work optimal with the Team Black Kernel.

[sabercrypto]

how to config ethermine + ezil.me? or is it posible?

[sp_]

how to config ethermine + ezil.me? or is it posible?

You need to use shardpool

TBMiner --algo ethash --hostname eu1-zil.shardpool.io --port 3333 --wallet %ETH_WALLET% --server_passwd %ZIL_WALLET%@eu1.ethermine.org:4444 --worker_name %computername%

[vstyle]

Like somebody already mentioned, you have to do something with "Dag verification failed. Exiting...". Tried to move one more rig to your miner, but cant because of that error. Same gpu is working fine with trex with very low rejects rate and without any crashes. Tried to lower memory oc from 1150 to 950 and still same (msi 3070).

Im getting this error as well, only way for it to go through for me was to set all the core and mem clock to 0 and adjust it again after it runs

Also was there a fix for the reported hashrate not showing on ethermine?

[matmator]

incredible the hashrate with this miner ?! rtx 3090fe = 130mh !!

[Geniusvzla]

Stats for AMD added on windows with temp control on the gpu like TBMiner on nvidia. If the gpu gets to hot, let is sleep for x seconds. More work needed on the linux version.
Note that v1.04 have some issues when running mixed AMD and NVIDIA in the rig. So better to use the --amd-only or --cuda-all-devices.

v1.05 Coming soon...

Greetings to all, and my respects to sp_
The v1.05 is much better, for now I have it only on this RX580 platform. Photo 01.

https://ibb.co/6HgfNfs

The other platform generates this a lot for me in all the cards but especially in the GPU (0) and for now I am with another program

https://ibb.co/0h0Ngry

And the last platform has rx 6800 but they reached me at 72 Mh / s and it went down to 66 Mh / s there it remained for a long time but in the end everything crashed. Lower the intensity but it didn't help. Go back to another program

I know that there are few data and details .. so what you need me to send, please tell me.

Sorry my bad english

[sp_]

Greetings to all, and my respects to sp_
The v1.05 is much better, for now I have it only on this RX580 platform. Photo 01.

Thanks for testing

yes, bug in the amd stats for clocks and temp. Only card0 is working. This miner was released 8 days ago, and need some more work. Amd support is going to be improved going further..

And the last platform has rx 6800 but they reached me at 72 Mh / s and it went down to 66 Mh / s there it remained for a long time but in the end everything crashed. Lower the intensity but it didn't help. Go back to another program

The Team black kernel use more power, increase the powerlimit to be able to hold the clockrate. If not your cards will trottle. We have a reported issue with crashing when generating the dag file. Working on it...

Im getting this error as well, only way for it to go through for me was to set all the core and mem clock to 0 and adjust it again after it runs

Start from 0 and retune everything. New kernel, new possibilities, new optimal clocks. The Team Black miner works best on pools that reward stale shares. Miningpoolhub.com give good returns.

Stale shares are rewarded in the Ethereum blockchain. They are called uncle blocks. The Team Black Miner is a uncle block miner. The opensource miner used to be, the claymore miner was good and had uncle support.  The other 5 closed source virus miners are not. If you are big solomine to protect the chain..

If 95% of the network ignore the uncle blocks, you only need 5% of the networks mining power to control the transactions

[moderator's note: consecutive posts merged]

[jims111]

Try 1.05 work fine but memory temp still can't display correctly with 3090 & 3080

I think you need the latest drivers.

Can you open a command prompt and type:

nvidia-smi --query-gpu=temperature.memory --format=csv

do you get N/A ?

Use 471.68 driver, return N/A with command

[momanz]

Just tried this on my AMD rig (2x rx580, 1x rx570, 1x5600xt, 2x 5700xt and 1x 6700xt) and am getting an additional 7mh with no new tuning (over TRM) as reported by the miner. will let it run for a while and see where I land pool side.

Can confirm I am only getting stats for the 1st card in the rig. Also an error "cannot open nvidia-smi for gpu utilization" appears just before each printing of the stats display.

please include memory junction temperature reporting if possible. My 5700s run hot and I like to control fans or throttle based on that temperature.

Nice Job.

[dle378]

Current Setup:

4x Nvidia RTX 3060 TI FE
1x EVGA RTX 3060 TI FTW3

OC Settings:

MEM Clock: 1200,1200,1200,1200,1200
CORE Clock: -200,-200,-200,-200,-200
Power Limit: 70,70,70,70,70
Fan Speed: 65,65,65,65,65

Should I be able to see the CORE/MEM/WATT reporting by default?

[sp_]

Should I be able to see the CORE/MEM/WATT reporting by default?

you could try to open a cmd promt and run:

nvidia-smi --id=0 --query-gpu=power.draw,clocks.sm,clocks.mem --format=csv
nvidia-smi --id=1 --query-gpu=power.draw,clocks.sm,clocks.mem --format=csv
nvidia-smi --id=2 --query-gpu=power.draw,clocks.sm,clocks.mem --format=csv
nvidia-smi --id=3 --query-gpu=power.draw,clocks.sm,clocks.mem --format=csv
nvidia-smi --id=4 --query-gpu=power.draw,clocks.sm,clocks.mem --format=csv

Do you get any information out?

incredible the hashrate with this miner ?! rtx 3090fe = 130mh !!

Run with --xintensity -1 and you can reach 135MHASH++ but you need to mine on a pool that reward stale shares.

[moderator's note: consecutive posts merged]

[lbc13000]

incredible the hashrate with this miner ?! rtx 3090fe = 130mh !!

Run with --xintensity -1 and you can reach 135MHASH++ but you need to mine on a pool that reward stale shares.

Hi,

How do you quet 135mh ?

I have here :
3090 FE
Pool : Ethermine
BMiner 1.04
Nvidia Driver : V471.96
Clock : 1515
Mem : 10852
Volt : 718
Power limit 90%
--xintensity -1

Result: 129mh
Gpu Temp 61.4°c
Hot Spot : 74.4°c
Meme Temp : 98°c

The stales report seems to be wrong, 53/0/18, the pool gives me 1% ?

 

[sp_]

TBMiner 1.04

Use v1.05.

The staleshares displayed in the miner window is an estimate. it's not given from the pool. Other users have reported ~135MHASH on the RTX 3090 but perhaps not on the FE cards. You need to increase memory to above 11160

33m [2021-09-16 11:35:43.184] eth.2miners.com (ethash)    PING: 119ms    DIFFICULTY: 2.03     EPOCH: 441
33m [2021-09-16 11:35:43.184]
33m [2021-09-16 11:35:43.184]
33m [2021-09-16 11:35:43.184] ID    BOARD   TEMP    FAN     CORE    MEM     WATT    kW/h    COST/h
33m [2021-09-16 11:35:43.184] GPU0  3090    49/0    95      1524    11160   335     0.34    inf
33m [2021-09-16 11:35:43.184]                                               335     0.34    inf
33m [2021-09-16 11:35:43.184]
33m [2021-09-16 11:35:43.184] ID    BOARD   TYPE    HASHRATE/W      HASHRATE        AVERAGE         SHARES
33m [2021-09-16 11:35:43.184] GPU0  3090    Cuda    398.62 kH/W     133.54 MH/s     133.52 MH/s     36/0/3 (100.00)
33m [2021-09-16 11:35:43.184]                       398.62 kH/s     133.54 MH/s     133.52 MH/s     36/0/3 (100.00)

[lbc13000]

Trojan:Win32/Wacatac.B!ml in the 1.05 release ?