⛏Team Black Miner (ETHB3 ETHW ETC VTC KAWPOW FIROPOW EVRPROGPOW MEOWPOW +dual)

[Nighthog]

Device Number: 0
    Device name: gfx90c
    PCIe bus id: 16
    Memory: 14GB

Internal graphics need a low value for --xintensity, but I think there is a hardcoded intensity to build the dagfile wich is causing the crash. Is it crashing before the dag file is generated?

It crashes without printing a single message. Doesn't even generate a log. Crashes that early.

Version 1.06, does work though.

I think there is a incompatibility with the AMD Stats or something, maybe?

[sp_]

I think there is a incompatibility with the AMD Stats or something, maybe?

you can try to run with --no-stats

No, ETC on AMD have same problem with 16GB virtual memory settings.
Till TBM 1.06 I had some extra 2MH/s from AMD to 38MH/s from laptop RTX3060 (80W) on NiceHash ETH

Can you try with --no-stats?

Yes, it is working (1.09 - both devices on Nicehash ETH pool) but with no stats.   

[Nighthog]

I think there is a incompatibility with the AMD Stats or something, maybe?

you can try to run with --no-stats

YES!

Started working. AMD Stats is the issue for the iGPU (gfx90c)

"--no-stats" is necessary.

[matmator]

why i have 0 in reported hashrate on ethermine pool ?

[sp_]

3 unsolved issues @git. 41 solved

https://github.com/sp-hash/TeamBlackMiner/issues

The reported hashrate is sometimes 0 on ethermine, but it doesn't affect the profit

[Geniusvzla]

3 unsolved issues @git. 41 solved

https://github.com/sp-hash/TeamBlackMiner/issues

The reported hashrate is sometimes 0 on ethermine, but it doesn't affect the profit

Greetings,
Trying again with v1.10. This is getting better every day.

Some details:
1- When an internet connection is not detected, the program retries several times but then closes without leaving a record. Is there any option for me to keep trying to reconnect until the internet is back on and it doesn't shut down, even 1 hour or more passes?

2- You can add several addresses with their respective ports in the command line of the .bat file? example:
eth-us-east1.nanopool.org
eth-us-west1.nanopool.org
this is in case any of the servers fail.

3- Waiting for a RX6800 to be loaned to see if a miracle can be done with this card. Improve stability and if possible increase your Mining Speed.

Thank you Legendario sp_

Sorry my bad english

[sp_]

-y --retry-pause (Set retry pause between connection attempts if pool is not responding)
-t --timeout (Set timeout in seconds. Used for connecting and socket timeout) -a

[sukidesu]

I tried 1.09 with ubuntu + flexpool. I got 600 mh/s average on the pool, but with 2%+ stales.
With t-rex, I was getting 610 mh/s average on the pool with 0.2% stales.

Does 1.10 fix the stales problem ? Any intensity to limit them ? Anyone has tried TBM on flexpool with better results ?

[sp_]

v1.10 has reduced stale shares on NVIDA.
flexpool does't pay for stale shares so you need to play wity the ---xintensity parameter or change the pool

[Dr_Victor]

Win 8.1, driver 472, miner crashes driver even in stock (and overclock). Gtx 1070


Despite the fact that the miner does not work correctly under Windows 8.1, I launched it on windows 10. To get the speed of 210 from 8 Asus gtx 1070 T-rex needs 1185 watt from the wall. And your miner  needs 1400 watt! So by far there is no way to use it for me. Are you going to solve this problem of ineffectiveness ?

[moderator's note: consecutive posts merged]

[sp_]

Try the cuda v1.10 11.4 build with --xintensity 256

[Alexstabilini]

Hi!

My 11 cards rig have some problems (9xp104+2x1060)..
miner starts but exit after dag generating..

https://ibb.co/khVtkkP

thanks
alex

[sp_]

windows 7 or 8.1? you need windows 10 or linux to run this miner

[Alexstabilini]

windows 7 or 8.1? you need windows 10 or linux to run this miner

win10!

[sp_]

win10!

You probobly need to add 64gb virtual memory.

Can you run

TBMiner --list-devices ?

perhaps gpu0 is internal graphics. Users report a bug in the stats with internal graphics, so you can try with --no-stats

[Alexstabilini]

win10!

You probobly need to add 64gb virtual memory.

Can you run

TBMiner --list-devices ?

perhaps gpu0 is internal graphics. Users report a bug in the stats with internal graphics, so you can try with --no-stats

i have 70g of virtual memory..i need to add it?! with --no-stats no luck! internal graphics card is disabled.. i access rig with vnc!

C:\Users\Administrator\Desktop\a\TeamBlackMiner_1_10_cuda_11_4>Set ETH_WALLET=0x59Aa6EAfb389E814441D02Ba6EF33c10726e4B16


C:\Users\Administrator\Desktop\a\TeamBlackMiner_1_10_cuda_11_4>TBMiner --list devices

Available Cuda devices
-----------------------

Device Number: 0
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB
    Memory clock rate (KHz): 5005000
    Memory bus width (bits): 256
    Peak memory bandwidth (GB/s): 320.320000

Device Number: 1
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB
    Memory clock rate (KHz): 5005000
    Memory bus width (bits): 256
    Peak memory bandwidth (GB/s): 320.320000

Device Number: 2
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB
    Memory clock rate (KHz): 5005000
    Memory bus width (bits): 256
    Peak memory bandwidth (GB/s): 320.320000

Device Number: 3
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB
    Memory clock rate (KHz): 5005000
    Memory bus width (bits): 256
    Peak memory bandwidth (GB/s): 320.320000

Device Number: 4
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB
    Memory clock rate (KHz): 5005000
    Memory bus width (bits): 256
    Peak memory bandwidth (GB/s): 320.320000

Device Number: 5
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB
    Memory clock rate (KHz): 5005000
    Memory bus width (bits): 256
    Peak memory bandwidth (GB/s): 320.320000

Device Number: 6
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB
    Memory clock rate (KHz): 5005000
    Memory bus width (bits): 256
    Peak memory bandwidth (GB/s): 320.320000

Device Number: 7
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB
    Memory clock rate (KHz): 5005000
    Memory bus width (bits): 256
    Peak memory bandwidth (GB/s): 320.320000

Device Number: 8
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB
    Memory clock rate (KHz): 5005000
    Memory bus width (bits): 256
    Peak memory bandwidth (GB/s): 320.320000

Device Number: 9
    Device name: NVIDIA GeForce GTX 1060 6GB
    PCIe bus id: 0
    Memory: 8GB
    Memory clock rate (KHz): 4004000
    Memory bus width (bits): 192
    Peak memory bandwidth (GB/s): 192.192000

Device Number: 10
    Device name: NVIDIA GeForce GTX 1060 6GB
    PCIe bus id: 0
    Memory: 8GB
    Memory clock rate (KHz): 4004000
    Memory bus width (bits): 192
    Peak memory bandwidth (GB/s): 192.192000


Available OpenCL devices
-------------------------

Device Number: 0
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB

Device Number: 1
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB

Device Number: 2
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB

Device Number: 3
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB

Device Number: 4
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB

Device Number: 5
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB

Device Number: 6
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB

Device Number: 7
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB

Device Number: 8
    Device name: NVIDIA P104-100
    PCIe bus id: 0
    Memory: 8GB

Device Number: 9
    Device name: NVIDIA GeForce GTX 1060 6GB
    PCIe bus id: 0
    Memory: 6GB

Device Number: 10
    Device name: NVIDIA GeForce GTX 1060 6GB
    PCIe bus id: 0
    Memory: 6GB


C:\Users\Administrator\Desktop\a\TeamBlackMiner_1_10_cuda_11_4>timeout 10

In attesa da  4^CTerminare il processo batch (S/N)? u

[sp_]

Does one card work?

-Y [9]

I see that PCIe bus id: always is 0 did you install the latest driver?

[Alexstabilini]

Does one card work?

-Y [9]

i add -Y 3 but nothing change... driver is 471.96.. currently i use gminer with no problem

https://ibb.co/Qb6ZPd9


okay with -Y [9]

C:\Users\Administrator\Desktop\a\TeamBlackMiner_1_10_cuda_11_4>TBMiner --algo ethash --no-stats -Y [9] --cuda-devices 1 --hostname eth.pool.zet-tech.eu --port 8005 --wallet 0x8a1E0bE188865f239bC9866d08ae62d6Fa2b181D --worker_name DESKTOP-820EGVB
     0m [2021-10-03 21:06:35.094] OpenCL driver version: 471.96
     0m [2021-10-03 21:06:35.094] Cuda driver version: 11.4
     0m [2021-10-03 21:06:35.094] Cuda runtime API version: 11.4
     0m [2021-10-03 21:06:35.094] 
     0m [2021-10-03 21:06:35.094]                                 
     0m [2021-10-03 21:06:35.094] 
     0m [2021-10-03 21:06:35.094] Welcome to Team Black Miner 1.10
     0m [2021-10-03 21:06:35.094]                                 
     0m [2021-10-03 21:06:35.094] 
     0m [2021-10-03 21:06:35.094] C:\gc\TBMiner\source\sp_workers\cl_gpu.cpp:cl_setup_devices():573: A OpenCL runtime error occured: CL_INVALID_VALUE
     0m [2021-10-03 21:06:35.094] Shutting down threads
     0m [2021-10-03 21:06:39.110] Exiting

C:\Users\Administrator\Desktop\a\TeamBlackMiner_1_10_cuda_11_4>timeout 10

In attesa da  0 secondi. Premere un tasto per continuare...

[sp_]

i add -Y 3 but nothing change... driver is 471.96.. currently i use gminer with no problem

You need to use brackets. and the option was U

-U [3]

-U [0,1,2,3]

and

--no-ansi


try with --xintensity 1 and remove --cuda-devices 1

[moderator's note: consecutive posts merged]

[Alexstabilini]

i add -Y 3 but nothing change... driver is 471.96.. currently i use gminer with no problem

You need to use brackets. and the option was U

-U [3]

-U [0,1,2,3]

and

--no-ansi

ok..this is the result


\Users\Administrator\Desktop\a\TeamBlackMiner_1_10_cuda_11_4>TBMiner --algo ethash --no-stats -U [9] --no-ansi --cuda-devices 1 --hostname eth.pool.zet-tech.eu --port 8005 --wallet 0x8a1E0bE188865f239bC9866d08ae62d6Fa2b181D --worker_name DESKTOP-820EGVB
     0m [2021-10-03 21:11:12.253] OpenCL driver version: 471.96
     0m [2021-10-03 21:11:12.253] Cuda driver version: 11.4
     0m [2021-10-03 21:11:12.253] Cuda runtime API version: 11.4
     0m [2021-10-03 21:11:12.253]
     0m [2021-10-03 21:11:12.253]
     0m [2021-10-03 21:11:12.253]
     0m [2021-10-03 21:11:12.253] Welcome to Team Black Miner 1.10
     0m [2021-10-03 21:11:12.253]
     0m [2021-10-03 21:11:12.253]
     0m [2021-10-03 21:11:12.424] GPU0  0GB added to miner as Cuda device
     0m [2021-10-03 21:11:12.518] Trying eth.pool.zet-tech.eu:8005 (ethash)
     0m [2021-10-03 21:11:12.565] Pool responded successfully to subscribe
     0m [2021-10-03 21:11:12.628] GPU0 Started Cuda work thread
     0m [2021-10-03 21:11:15.847] GPU0 Starting generating ethash dag (Epoch: 444)
     0m [2021-10-03 21:11:16.034] GPU0 DAG generated in 3.40 seconds (4685823kb)
     0m [2021-10-03 21:11:16.034] GPU0 XIntensity set to Dynamic
     0m [2021-10-03 21:11:19.035] C:\gc\TBMiner\source\sp_cuda\cudaminer.cpp:cuda_search():390: A cuda runtime error occured: the launch timed out and was terminated
     0m [2021-10-03 21:11:19.035] Shutting down threads
     0m [2021-10-03 21:11:19.050] Stratum thread exited
     0m [2021-10-03 21:11:19.050] Control thread exited
     0m [2021-10-03 21:11:23.051] Exiting

C:\Users\Administrator\Desktop\a\TeamBlackMiner_1_10_cuda_11_4>timeout 10

In attesa da  4 secondi. Premere un tasto per continuare...