sp_ (OP)
Legendary
 Offline
Activity: 2954
Merit: 1087
Team Black developer
|
 |
October 24, 2021, 07:00:18 PM |
|
Cheers bud, looking forward to giving it a whirl
TeamBlackMiner_1_19_Ubuntu_18_04_Cuda_11_4.tar.gz has been uploaded |
|
|
|
somaton
Jr. Member
Offline
Activity: 212
Merit: 6
|
|
October 24, 2021, 07:00:36 PM |
|
Ascii bug is still there in 1.19, but now it can be seen for only a few seconds, not for 1 min like in previous versions.  |
|
|
|
|
onimorza
Newbie
Offline
Activity: 5
Merit: 0
|
|
October 24, 2021, 08:53:59 PM |
|
--cl-devices [2,3,4]
I'm under the impression that you don't understand what I'm looking for.. But nevermind; I tested TBM on another rig; hashrate is much higher than GMiner, but it creates too many stales. I know this is by design, and only to be used with pools that pay for stales, but most pools don't, so I'm better off with GMiner anyway.. May check TBM later if things get better.. |
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
October 24, 2021, 09:15:56 PM |
|
Removing the stales is easy, you just have to run with a low --xintensity.
Like --xintensity 24
v1.16 has a high stale rate on --xintensity -1 . v1.18/v1.19 has halve the stales from 1.16 but hashing at the same speed (--xintensity -1)
|
|
|
|
onimorza
Newbie
Offline
Activity: 5
Merit: 0
|
|
October 24, 2021, 09:32:04 PM |
|
Again an answer besides the question.
Are you a robot?
|
|
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
October 24, 2021, 10:03:46 PM
Last edit: October 25, 2021, 09:35:11 AM by sxemini |
|
Again an answer besides the question.
Are you a robot?
You can read readmes? --cuda-devices [2,3,4] for example if you don´t want to use gpu 0 and 1 or what is your problem? @sp_ I have problem with mining eth/etc+zil over rustpool.xyz. I can´t connect to the pool. TBMiner --algo ethash --hostname eu1-zil.rustpool.xyz --port 8008 --wallet %ETH_WALLET% --server_passwd %ZIL_WALLET%@eth.2miners.com:2020 --worker_name %computername% Other miner work and etc or eth only also. Maybe TBMiner has problem with zil.rustpool.xyz? |
|
|
|
|
hashatharias
Newbie
Offline
Activity: 12
Merit: 0
|
|
October 25, 2021, 12:42:51 AM
Last edit: October 25, 2021, 01:04:10 AM by hashatharias |
|
To install v1.19 on HiveOS, after 1.16, follow these steps cd /hive/miners/teamblackminer/1.16/
mv TBMiner TBMiner.1.18.bak
wget https://github.com/sp-hash/TeamBlackMiner/releases/download/v1.19/TeamBlackMiner_1_19_Ubuntu_18_04_Cuda_11_4.tar.gz
tar -xf TeamBlackMiner_1_19_Ubuntu_18_04_Cuda_11_4.tar.gz
cp /hive/miners/teamblackminer/1.16/TeamBlackMiner_1_19_Ubuntu_18_04_Cuda_11_4/TBMiner /hive/miners/teamblackminer/1.16/
>It seems that TBMiner is arlready executable (type ls then hit return, TBMiner should be green)
>if not, run this command
chmod +x TBMiner Then type miner restart and hit return Weird thing with 1.19 21m [2021-10-24 21:02:47.279] POOL HASHRATE: VARDIFF
While the value was at like 2000 when I started the miner, then it switched to VARDIFF |
|
|
|
|
dle378
Copper Member
Newbie
Offline
Activity: 77
Merit: 0
|
|
October 25, 2021, 01:56:36 AM |
|
TBM v1.19 CUDA 11_4
4x 3060 TI FE
2x EVGA 3060 TI FTW ULTRA3
NVIDIA 472.12 DRIVER
I re-uploaded the 11_4 build. you might need to select a kernel manually with --kernel. --kernel 8 doesn't like too much oc. on crash try --kernel 4 Still crashes even when running on either --kernel 6 or --kernel 4. On a different note, I discovered that running xintensity 768 on TBM 1.18 is stable with 0 rejects. 521m [2021-10-24 20:35:39.378] ID BOARD TYPE KERN XINT TEMP FAN CORE MEM WATT 521m [2021-10-24 20:35:39.378] GPU0 3060Ti Cuda 3 768 63/0 70 1416. 8077 153 521m [2021-10-24 20:35:39.378] GPU1 3060Ti Cuda 5 768 65/0 79 1676 8077 184 521m [2021-10-24 20:35:39.378] GPU2 3060Ti Cuda 2 768 68/0 70 1444 8077 153 521m [2021-10-24 20:35:39.378] GPU3 3060Ti Cuda 6 768 55/0 79 1700 8077 183 521m [2021-10-24 20:35:39.378] GPU4 3060Ti Cuda 5 768 66/0 70 1506 8077 153 521m [2021-10-24 20:35:39.378] GPU5 3060Ti Cuda 6 768 62/0 70 1446 8077 153 521m [2021-10-24 20:35:39.378] 979 521m [2021-10-24 20:35:39.378] 521m [2021-10-24 20:35:39.378] ID BOARD HASHRATE/W HASHRATE AVERAGE SHARES 521m [2021-10-24 20:35:39.378] GPU0 3060Ti 424.63 kH/W 64.97 MH/s 64.96 MH/s 236/0/6 (100.00) 521m [2021-10-24 20:35:39.378] GPU1 3060Ti 353.08 kH/W 64.97 MH/s 64.96 MH/s 226/0/6 (100.00) 521m [2021-10-24 20:35:39.378] GPU2 3060Ti 424.62 kH/W 64.97 MH/s 64.96 MH/s 237/0/2 (100.00) 521m [2021-10-24 20:35:39.378] GPU3 3060Ti 355.00 kH/W 64.97 MH/s 64.96 MH/s 241/0/3 (100.00) 521m [2021-10-24 20:35:39.378] GPU4 3060Ti 424.57 kH/W 64.96 MH/s 64.96 MH/s 223/0/6 (100.00) 521m [2021-10-24 20:35:39.378] GPU5 3060Ti 424.60 kH/W 64.96 MH/s 64.96 MH/s 202/0/1 (100.00) 521m [2021-10-24 20:35:39.378] 401.09 kH/W 389.79 MH/s 389.77 MH/s 1365/0/24 (100.00) 521m [2021-10-24 20:35:39.378] 521m [2021-10-24 20:35:39.378] COST: 0.98 KWH (0.08USD) POOL HASHRATE: 381.77 MH/s |
|
|
|
|
poisons77
Newbie
Offline
Activity: 14
Merit: 0
|
|
October 25, 2021, 02:12:33 AM |
|
Even with 1.19 I've problems. Some cards are recognized only 3gb. I've all 580 8gb here's the screenshot https://ibb.co/jzmTGWQ |
|
|
|
|
KillrBee
Jr. Member
Offline
Activity: 139
Merit: 3
|
|
October 25, 2021, 02:53:33 AM |
|
Thanks for uploading 1.19! And all the work you've been doing  I'm having trouble getting --lock-mclock to function correctly...--lock-cclock works perfectly (setting after dag buffer verified), but --lock-mclock just isn't working on my 3090 regardless of the input. Have checked the formatting in the .bat etc. but just won't play nice. Afterburner works no problem and can manually set the memory clocks via nvidia-smi in an admin cmd line (albeit not able to set to anything other than the supported clocks in nvidia-smi which are rather limited in OC). Anyone else having trouble with --lock-mclock? I can never get my 3090 to lock the MemClock -- nvidia-smi will say it's changed the clock, but it doesn't change anything (same with setting the fan speed through the nvidia-smi). Core clock will change, but that's it. I just add the nvidiaInspector overclocking shortcut I have into the batch file and it will run the proper memory clock from there. |
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
October 25, 2021, 04:03:16 AM
Last edit: November 08, 2021, 12:58:48 PM by mprep |
|
I have problem with mining eth/etc+zil over rustpool.xyz. I can´t connect to the pool.
Other miner work and etc or eth only also. Maybe TBMiner has problem with rustpool.xyz?
rustpool.xyz seems to be down.
Weird thing with 1.19 21m [2021-10-24 21:02:47.279] POOL HASHRATE: VARDIFF
While the value was at like 2000 when I started the miner, then it switched to VARDIFF We don't support calculating the Pool hashrate if the pool is changing difficulty while you mine. This can be implemented later, but require some more work. Which pool is this? [moderator's note: consecutive posts merged] |
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
October 25, 2021, 04:08:57 AM
Last edit: November 08, 2021, 12:57:41 PM by mprep |
|
Still crashes even when running on either --kernel 6 or --kernel 4.
Does it crash with --kernel 0 ? Try to lower the clock. On a different note, I discovered that running xintensity 768 on TBM 1.18 is stable with 0 rejects.
This is a good value for high difficulty pools that accept stales, but too high for other pools.
Some cards are recognized only 3gb. I've all 580 8gb
try tbminer --list-devices what do you get?
I can never get my 3090 to lock the MemClock -- nvidia-smi will say it's changed the clock, but it doesn't change anything (same with setting the fan speed through the nvidia-smi). Core clock will change, but that's it. I just add the nvidiaInspector overclocking shortcut I have into the batch file and it will run the proper memory clock from there.
We support setting the memclock too whatever the nvidia-smi tool support. This might not be as high as msi afterburner. Type this to see the supported clocks $ nvidia-smi --query-supported-clocks=memory --format=csv memory [MHz] 7001 MHz 6801 MHz 5001 MHz 810 MHz 405 MHz [moderator's note: consecutive posts merged] |
|
|
|
poisons77
Newbie
Offline
Activity: 14
Merit: 0
|
|
October 25, 2021, 04:18:05 AM |
|
try
tbminer --list-devices
what do you get?
Available Cuda devices
-----------------------
Available OpenCL devices
-------------------------
Device Number: 0
Device name: Ellesmere
PCIe bus id: 1
Memory: 3GB
Device Number: 1
Device name: Ellesmere
PCIe bus id: 2
Memory: 3GB
Device Number: 2
Device name: Ellesmere
PCIe bus id: 3
Memory: 3GB
Device Number: 3
Device name: Ellesmere
PCIe bus id: 4
Memory: 3GB
Device Number: 4
Device name: Ellesmere
PCIe bus id: 8
Memory: 3GB
Device Number: 5
Device name: Ellesmere
PCIe bus id: 11
Memory: 3GB
Device Number: 6
Device name: Ellesmere
PCIe bus id: 12
Memory: 3GB
Device Number: 7
Device name: Ellesmere
PCIe bus id: 13
Memory: 3GB
Device Number: 8
Device name: Ellesmere
PCIe bus id: 14
Memory: 3GB |
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
October 25, 2021, 04:29:22 AM |
|
Seems to be a driver problem. Weird, never seen this before..
|
|
|
|
poisons77
Newbie
Offline
Activity: 14
Merit: 0
|
|
October 25, 2021, 04:36:36 AM |
|
Seems to be a driver problem. Weird, never seen this before..
Maybe because of the DAG generation fails? It makes sense if the memory remain "occupied" by the failed DAG generated. 8gb - DAG size, then rounded is 3gb as I see in the list. This can also explain why I can fix only when I reboot the rig Maybe I can open an issue on github? |
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
October 25, 2021, 04:39:42 AM |
|
Maybe because of the DAG generation fails? It makes sense if the memory remain "occupied" by the failed DAG generated. 8gb - DAG size, then rounded is 3gb as I see in the list.
No the 3gb is from the opencl call to determine the size of your card. Could be related to a wrong gpu platform, or a driver installation gone wrong. You should do a driver uninstall with wipe and do a reinstall. |
|
|
|
poisons77
Newbie
Offline
Activity: 14
Merit: 0
|
|
October 25, 2021, 04:53:39 AM |
|
No the 3gb is from the opencl call to determine the size of your card. Could be related to a wrong gpu platform, or a driver installation gone wrong. You should do a driver uninstall with wipe and do a reinstall.
Well, if I stop the miner and run the --list-devices command, all the devices are read again with 8gb, so it is the "free memory" what you see from the tbminer --list-devices command, not the hardware memory |
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
October 25, 2021, 05:02:51 AM |
|
try --cl-devices [0,1,2,3,4,5,6,7] instead of --auto-detect . Don't use both options at the same time.
|
|
|
|
poisons77
Newbie
Offline
Activity: 14
Merit: 0
|
|
October 25, 2021, 05:59:10 AM |
|
try --cl-devices [0,1,2,3,4,5,6,7] instead of --auto-detect . Don't use both options at the same time.
I just use the --cl-devices command in the "extra config arguments" on HiveOs, and it automatically don't use the --auto-detect? |
|
|
|
|
ayiphelmy
Copper Member
Full Member
Offline
Activity: 416
Merit: 105
|
|
October 25, 2021, 06:08:46 AM |
|
try
tbminer --list-devices
what do you get?
Available Cuda devices
-----------------------
Available OpenCL devices
-------------------------
Device Number: 0
Device name: Ellesmere
PCIe bus id: 1
Memory: 3GB
Device Number: 1
Device name: Ellesmere
PCIe bus id: 2
Memory: 3GB
Device Number: 2
Device name: Ellesmere
PCIe bus id: 3
Memory: 3GB
Device Number: 3
Device name: Ellesmere
PCIe bus id: 4
Memory: 3GB
Device Number: 4
Device name: Ellesmere
PCIe bus id: 8
Memory: 3GB
Device Number: 5
Device name: Ellesmere
PCIe bus id: 11
Memory: 3GB
Device Number: 6
Device name: Ellesmere
PCIe bus id: 12
Memory: 3GB
Device Number: 7
Device name: Ellesmere
PCIe bus id: 13
Memory: 3GB
Device Number: 8
Device name: Ellesmere
PCIe bus id: 14
Memory: 3GB as far as i know 3gb card cant mine eth |
|
|
|
|
|
