ayman_abm
Newbie
 Offline
Activity: 24
Merit: 0
|
 |
October 27, 2021, 09:25:48 PM
Last edit: November 08, 2021, 12:54:32 PM by mprep |
|
I have Latest Drivers installed : N 470.74 Drivers The only thing done, is that I manually replaced 1.19 to 1.20 by using commands in bash. may be something went wrong or I miss to do something while replacing 1.19 ?
470.74 is not the latest. this driver only support cuda 11.3
this is the latest available on HiveOS, used : nvidia-driver-update --list and it was latest one in the list [moderator's note: consecutive posts merged] |
|
|
|
|
deedeeranged
Member
Offline
Activity: 325
Merit: 42
|
|
October 27, 2021, 09:40:29 PM |
|
I have Latest Drivers installed : N 470.74 Drivers The only thing done, is that I manually replaced 1.19 to 1.20 by using commands in bash. may be something went wrong or I miss to do something while replacing 1.19 ? Untar the file in a new directory and see which files are in the original directory to compare. If something is missing you know straight away. Being an old IT person I have always compared files first before overwriting just in case having missed something. Use ls -la so you also see hidden files. |
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
October 27, 2021, 09:41:28 PM |
|
perhaps you need to give execute permissions.
$ chmod a+rwx tbminer
|
|
|
|
deedeeranged
Member
Offline
Activity: 325
Merit: 42
|
|
October 27, 2021, 09:45:48 PM |
|
perhaps you need to give execute permissions.
$ chmod a+rwx tbminer
Thats a good one. Maybe also check if .sh files are in linux/unix format as it has happened that files when you open them with vi they have ^M on every line which you need to remove. |
|
|
|
|
ayman_abm
Newbie
Offline
Activity: 24
Merit: 0
|
|
October 27, 2021, 09:49:20 PM |
|
perhaps you need to give execute permissions.
$ chmod a+rwx tbminer
did that command, didnt help. FYI, I only cp TBminer from tar file to 1.19 directory. shall I copy also miner.conf cacert.pem ? |
|
|
|
|
cost82el
Newbie
Offline
Activity: 91
Merit: 0
|
|
October 27, 2021, 09:50:15 PM |
|
I have Latest Drivers installed : N 470.74 Drivers The only thing done, is that I manually replaced 1.19 to 1.20 by using commands in bash. may be something went wrong or I miss to do something while replacing 1.19 ? add this line in miner.config --api-port 64068 |
|
|
|
|
|
P00P135
|
|
October 27, 2021, 09:50:29 PM |
|
This miner reports high numbers but at the pool its much lower than Trex.
|
|
|
|
|
|
|
|
|
ayman_abm
Newbie
Offline
Activity: 24
Merit: 0
|
|
October 27, 2021, 09:59:00 PM |
|
I have Latest Drivers installed : N 470.74 Drivers The only thing done, is that I manually replaced 1.19 to 1.20 by using commands in bash. may be something went wrong or I miss to do something while replacing 1.19 ? add this line in miner.config --api-port 64068 Didnt help, still nothing. let me try replace 1.19 Back and check the results, seems issue in 1.20 !! |
|
|
|
|
deedeeranged
Member
Offline
Activity: 325
Merit: 42
|
|
October 27, 2021, 10:00:14 PM |
|
perhaps you need to give execute permissions.
$ chmod a+rwx tbminer
did that command, didnt help. FYI, I only cp TBminer from tar file to 1.19 directory. shall I copy also miner.conf cacert.pem ? If they are from the original tbm directory on hiveos than probably yes. |
|
|
|
|
ayman_abm
Newbie
Offline
Activity: 24
Merit: 0
|
|
October 27, 2021, 10:09:23 PM |
|
Have you tested this driver? I have RTX 3xxx Cards, I need to make sure not miss with rig, its located far away from me. |
|
|
|
|
cost82el
Newbie
Offline
Activity: 91
Merit: 0
|
|
October 27, 2021, 10:11:44 PM
Last edit: November 08, 2021, 12:54:50 PM by mprep |
|
I have Latest Drivers installed : N 470.74 Drivers The only thing done, is that I manually replaced 1.19 to 1.20 by using commands in bash. may be something went wrong or I miss to do something while replacing 1.19 ? add this line in miner.config --api-port 64068 Didnt help, still nothing. let me try replace 1.19 Back and check the results, seems issue in 1.20 !!
Have you tested this driver? I have RTX 3xxx Cards, I need to make sure not miss with rig, its located far away from me. driver is ok.. can confirm that A 19.20 (kernel) N 470.82.00 DRIVERS [moderator's note: consecutive posts merged] |
|
|
|
|
deedeeranged
Member
Offline
Activity: 325
Merit: 42
|
|
October 27, 2021, 10:14:06 PM |
|
Have you tested this driver? I have RTX 3xxx Cards, I need to make sure not miss with rig, its located far away from me. Actually looking at the image you provided unless you are running an asic you might need to update hiveos altogether as seem to run an old version. Newest version is hiveos-0.6-208-stable@210818.img.xz |
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
October 27, 2021, 10:14:16 PM |
|
Others have managed to run 1.20 without any problems. 1.20 was released a few hours ago, why don't you wait until hiveos add it.
|
|
|
|
ayman_abm
Newbie
Offline
Activity: 24
Merit: 0
|
|
October 27, 2021, 10:27:03 PM |
|
Others have managed to run 1.20 without any problems. 1.20 was released a few hours ago, why don't you wait until hiveos add it.
wanted to test --dagintensity |
|
|
|
|
ayman_abm
Newbie
Offline
Activity: 24
Merit: 0
|
|
October 27, 2021, 10:48:50 PM |
|
Fixed The issue, - Newer Driver installed 470.82.00
- Added --api-port 64068
Thank you guys, Happy mining ⚒ everyone  |
|
|
|
|
|
PeaMine
|
|
October 28, 2021, 12:17:45 AM
Last edit: October 28, 2021, 04:16:19 AM by PeaMine |
|
This miner reports high numbers but at the pool its much lower than Trex.
I also use T-rex and having this issue as well, tried low default and high intensity and kernels. Client side is 32mh~ the highest Ive seen and client pool rate says higher than that usually. But pool side the rate 20-40% less after a couple 6 hour tests. Around 1% stales which are paid at 80%. T-rex is about 29.5MH but poolside is exactly that as well. This is on a 1070 setup Linux latest drivers and version plus older ones. I am using SSL on both Trex and TBM. Could SSL or something else make that much of a difference on TBM but not Trex? I need to try other pools. |
Datacenter Technician and Electrician. If you have any questions feel free to ask me as I am generally bored looking at logs and happy to help during free time.
|
|
|
dle378
Copper Member
Newbie
Offline
Activity: 77
Merit: 0
|
|
October 28, 2021, 02:43:14 AM |
|
Thanks, I'll test these values.
What about --dagintensity ?
Since the verification code doesn't fail, you don't need to use this. But you could use to increase the memory clock and put --dagintensity 0. This option is for rtx 3060ti,3070,3080 with extreme clocks. But you seem to be happy with 102MHASH. Higher clocks higher power needed. Is there any benefit to adding this parameter with a high xintensity value on RTX 30XX cards in 2Miners? |
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
October 28, 2021, 05:13:00 AM
Last edit: October 28, 2021, 09:47:12 AM by mprep |
|
I am using SSL on both Trex and TBM.
SSL have known issues. you should use the normal port
But pool side the rate 20-40% less after a couple 6 hour tests. Around 1% stales which are paid at 80%.
I get around +5% in tbm poolside vs T-rex, so something is wrong in your setup. Mine on high intensity.. epoc 450 can never give you 32Mhash on the gtx 1070. Normally 25-29mhash.
Is there any benefit to adding this parameter with a high xintensity value on RTX 30XX cards in 2Miners?
You can increase the speed with higher intensity. Why don't you try it out. What numbers are you getting? --xintensity 224 (default) --xintensity 256 --xintensity 288 --xintensity 320 . . . [moderator's note: consecutive posts merged] |
|
|
|
|
