Lottery Solo Pool Miner Race on ckpool

[Bitcoinovich]

Hello everyone! I am going to buy LV 07 miner. I would like to know if there were any payouts on this pool? And how often is there luck?

[willi9974]

Hello everyone! I am going to buy LV 07 miner. I would like to know if there were any payouts on this pool? And how often is there luck?

Welcom to our forum

Payout on Pool Level are often, always as a block was found.
Please have a Look on the ckpool topic.

Our small group here in this topic has not found a block yet.

Best regards
Willi

[Bitcoinovich]

Hello everyone! I am going to buy LV 07 miner. I would like to know if there were any payouts on this pool? And how often is there luck?

Welcom to our forum

Payout on Pool Level are often, always as a block was found.
Please have a Look on the ckpool topic.

Our small group here in this topic has not found a block yet.

Best regards
Willi

To increase my chances, should I be in your small group or go to the pool?

[willi9974]

Welcome to our forum

To increase your chance it is better in a team with more hashrate but on the other side you have also Share the return in kind of we found a block.

Best regards and happy mining
Willi

[Bitcoinovich]

Welcome to our forum

To increase your chance it is better in a team with more hashrate but on the other side you have also Share the return in kind of we found a block.

Best regards and happy mining
Willi

Thank you very much for your answers! I will join you as soon as I receive the device.

[Flowingoaktree]

Hi Guys,

I just joined the pool with my Lucky Miner lv07.

GL to us I hope we find a block

Here's my payout address: bc1q9y288t5hzdcrxp3xxtcv0smjq7wkesfc028e5h


Thanks for the pool, really cool idea!

[willi9974]

Hi everyone,

Just a quick look at the device list.
Even though no one likes them, the main hashrate currently comes from the Avalon with 75 THs, followed by the LV07 with 35 THs. Everyone always says they only want open source miners, but the facts clearly speak for the best price/performance ratio.

Best regards,
Willi

https://solorun.lima.zone/devices.php

[baginek]

Hey guys, I got NerdQaxe++ up and running  is it possible to add the NQ++ into the selfservice list, so I can help to finally find a block with that piece of HW as well? :d

[willi9974]

Hey guys, I got NerdQaxe++ up and running  is it possible to add the NQ++ into the selfservice list, so I can help to finally find a block with that piece of HW as well? :d

Hello baginek

I add the Nerd Qaxe++ BM1368 with your new user baginek_16, that is the next iser in a row what you have already 1 to 15
I mean the Nerd Qaxe++ has only more chips, but from the same type BM1368, right?
If i'm wrong, please tel me the right value.

Best regards and happy Mining,
Willi

[baginek]

Hello Willi,

NQ++ is 4xBM1370, same chips as Bitaxe Gamma.
Btw sorry for the username spam from me :d Is it possible to delete some of the created baginek users?
Thx

[willi9974]

Hello Willi,

NQ++ is 4xBM1370, same chips as Bitaxe Gamma.
Btw sorry for the username spam from me :d Is it possible to delete some of the created baginek users?
Thx

No Problem baginek,

Tell me what for usernames i should delete, than i can remove it from our miner device list.
At the Moment i have baginek_1 to baginek_15 in use.
But you can also let is as it is, no Problem.

Best regards,
Willi

[squirrel999]

Hi Guys,

I just joined the pool with my Bitaxe 601 Gamma.

Username: squirrel999
Device type: Bitaxe 601 Gamma
Normal speed: 1.5 TH/s

Big thanks for setting up the pool, really appreciate the great concept!

[willi9974]

Hi Guys,

I just joined the pool with my Bitaxe 601 Gamma.

Username: squirrel999
Device type: Bitaxe 601 Gamma
Normal speed: 1.5 TH/s

BTC address: bc1qjr00h9cscdng03myghm0s4u0papmrdc23ecgd4

Big thanks for setting up the pool, really appreciate the great concept!

Welcome squirrel999

To our small Mining project. I add your worker with the mining hardware type for our statistics. If you add a second miner please use username_number as username. mostly if someone start with one miner, week later a second miner pops up

Happy Mining and let us find a block
Willi

[Ronaldinho10]

Hello

I've joined the pool)

Username: Ronaldinho10
Device type: Bitaxe 601 Gamma
Normal speed: 1.2 TH/s
BTC address: bc1qtxcgv0t7xysyvmzrjwkwnrfrgw9tpuvjahaldk

Thank you AGAIN

[willi9974]

Hello

I've joined the pool)

Username: Ronaldinho10
Device type: Bitaxe 601 Gamma
Normal speed: 1.2 TH/s
BTC address: bc1qtxcgv0t7xysyvmzrjwkwnrfrgw9tpuvjahaldk

Thank you AGAIN

Welcome Ronaldinho10 in our small mining Group.
Nice to see you have the selfeservice used.

Cross our Fingers for a block and happy mining,
Willi

[baginek]

Hello Willi,

Could you please delete workers baginek_4, baginek_5 and baginek_8 and all the rest up from the baginek_8 (_9, _10 -_xx)?
so please keep workers baginek_1, _2, _3, _6 and _7.

thx

[willi9974]

Hello Willi,

Could you please delete workers baginek_4, baginek_5 and baginek_8 and all the rest up from the baginek_8 (_9, _10 -_xx)?
so please keep workers baginek_1, _2, _3, _6 and _7.

thx

Hello baginek,

no problem i have deleted the following worker from the lima statistic page.

baginek_4
baginek_5
baginek_8
baginek_9
baginek_10
baginek_11
baginek_12
baginek_13
baginek_14
baginek_15

If you need future help, please ping me, no problem.

Best regards and happy Mining,
Willi

[fishhot]

Hello everyone,
I was mining on the Willipool with a Nano 3 like several people here, the miner was purchased in January 2025, it was set to High mode and generated the expected 4 Th, the two plastic covers were removed for better cooling.
It started to malfunction several weeks ago and finally stopped a few days ago. I noticed that the usb-c connector used to power it had literally melted, with traces of overheating in the connector housing on the Nano.
For a device requiring only 140 W to operate at full power, I'm not sure this type of connector is the best choice.
My message to all owners of these devices is to be vigilant if they're running in High H24 mode, and to check regularly that they restart without load.
I'm in discussion with the retailer, a store in Paris (phew, I don't have to deal with Canaan about the warranty).
Good day and good mining to all

[willi9974]

Yes i recomend the same. Put it not on the highest speed mode it will not work good for a long time.
I have it on the lowest mode and remove also the plastic plate for better cooling but i have also sometime the issue Speed Drops down, and came back only after a manual reboot. So keep your miner in your Monitoring

[botor123]

Hello everyone,
I was mining on the Willipool with a Nano 3 like several people here, the miner was purchased in January 2025, it was set to High mode and generated the expected 4 Th, the two plastic covers were removed for better cooling.
It started to malfunction several weeks ago and finally stopped a few days ago. I noticed that the usb-c connector used to power it had literally melted, with traces of overheating in the connector housing on the Nano.
For a device requiring only 140 W to operate at full power, I'm not sure this type of connector is the best choice.
My message to all owners of these devices is to be vigilant if they're running in High H24 mode, and to check regularly that they restart without load.
I'm in discussion with the retailer, a store in Paris (phew, I don't have to deal with Canaan about the warranty).
Good day and good mining to all

wrong section but still- 50 percent of my devices have the same problem - melted power usb c. 3 power supplies have also died recently.