Lottery Solo Pool Miner Race on ckpool

[willi9974]

The miner could not deleted manually, they will be timed out with a time.
So no problem at the pool or on the statistic side.
All works as designed.

Best regards and happy Mining
Willi

[AlexandrKaspiy]

Hi!
I finally restored the firmware on my miner. I'm back in the game. I'm duplicating the message. Thanks for the opportunity to participate in the race.
Model: lv06
User: bc1qeuupt2tgerfum8jclt8aklu9cdmzzkwml9lg7c.AlexandrKaspiy

User forum: AlexandrKaspiy
Address btc: 19rQC12SrynHxzZdeQPN32h7VeiSh6L6w1

[willi9974]

Hi!
I finally restored the firmware on my miner. I'm back in the game. I'm duplicating the message. Thanks for the opportunity to participate in the race.
Model: lv06
User: bc1qeuupt2tgerfum8jclt8aklu9cdmzzkwml9lg7c.AlexandrKaspiy

User forum: AlexandrKaspiy
Address btc: 19rQC12SrynHxzZdeQPN32h7VeiSh6L6w1

Hello AlexandrKaspiy,

welcome to our small project
Can I ask you: where you come from and how you came up with our little project here?

Best regards,
Willi

[AlexandrKaspiy]

I am from Kazakhstan.
I became interested in blockchain. I saw your project on this forum and decided to participate last summer. But I broke the firmware in the miner. I managed to restore it only now.

[willi9974]

Fundraising for burned-out miners by RealMalatesta

A forum mining colleague's house burned down and his miners left us.

I'm glad there were no injuries, and even if it was just miners, they can be replaced.
I'd like to collect for some small bitaxe miners and then send them to him accordingly.

It would be nice if one or the other would participate and we could help each other in our community


Donation address would be: 3PiZ9McQn7aWySaUKFtwyCzHkM4J8bf7rh

Many thanks and happy Mining,
Willi

[Nexus9090]

Fundraising for burned-out miners by RealMalatesta

A forum mining colleague's house burned down and his miners left us.

I'm glad there were no injuries, and even if it was just miners, they can be replaced.
I'd like to collect for some small bitaxe miners and then send them to him accordingly.

It would be nice if one or the other would participate and we could help each other in our community


Donation address would be: 3PiZ9McQn7aWySaUKFtwyCzHkM4J8bf7rh

Many thanks and happy Mining,
Willi

-snip-

Wow that's truly awful. Fortunate that no one was injured. I hope that they have insurance.

[HagssFIN]

^
Wow, that is really unfortunate.
I wish the best for him recovering from the fire.

Reading this and other stories in the past, I feel very fortunate that during the most active part of my mining "career", I only had one serious close-call incident. The psu which I got originally with BW-L21 miner was a bad quality one with shitty dc side wiring, and I woke up in the middle of the night to my smoke detector alarm when the wiring failed.

[philipma1957]

Hello all,

Due to the fact that some of our colleagues overdo it with the monitoring and call up the website several times per second or dozens of times per minute, the call parameter Workername has been deactivated.

https://solorun.lima.zone/?worker=workername

From now on only all miners are displayed, but can be filtered manually.
I ask everyone (!!!) who wants to monitor something to read it directly from the pool page and not from the statistics page. But also on the pool page it makes no sense to read the data every second, because the data is only updated every 30-60 seconds on the solo pool page too.

https://eusolo.ckpool.org/users/bc1qeuupt2tgerfum8jclt8aklu9cdmzzkwml9lg7c

Otherwise it will destroy my free webspace.
I don't want the whole statistics page to stop working because of one or a few users.

Thank you for your understanding, this has now cost me at least 5-6 hours why the exports no longer run in the background or do not work as usual due to high usage.

Best regards,
Willi

is 


https://eusolo.ckpool.org/users/bc1qeuupt2tgerfum8jclt8aklu9cdmzzkwml9lg7c


the correct address to mine to for this club?

how do you award coins if we hit?

It seems like there is 147 th mining

so if I do 120th what is my share if we hit?

[unpainted]

Welcome!

Please read the OP https://bitcointalk.org/index.php?topic=5478927.msg63368324#msg63368324

[hawer357]

is  


https://eusolo.ckpool.org/users/bc1qeuupt2tgerfum8jclt8aklu9cdmzzkwml9lg7c


the correct address to mine to for this club?

how do you award coins if we hit?

It seems like there is 147 th mining

so if I do 120th what is my share if we hit?

There seems to be a discrepancy with the hashrate. https://solorun.lima.zone/ shows something about 211 TH/s while ckpool statistics shows around 140 TH/s. Some time ago there was a split between EU and US pools, maybe Willis statistics show the combination. You can cross-check it with https://solo.ckpool.org/users/bc1qeuupt2tgerfum8jclt8aklu9cdmzzkwml9lg7c (same address, just US pool)

[willi9974]

Yes, the statistic page is a number of EU and USA Pool.

[willi9974]

Hello everyone,

I've added a captcha to the statistics page today when the session is first established.
I hope this will deter some bots and script junkies so that the page will now function fully again and display all values again.

If it doesn't work, I'll have to remove all free API requests like BTC price/diff/etc.

Best regards,
Willi

[willi9974]

Hello all,

for some bitaxe user here, maybe the tuning script is nice to know.

https://github.com/mrv777/Bitaxe-Hashrate-Benchmark/

you can auto tune the speed parameter to the best value.


Standard Usage
Run the benchmark tool by providing your Bitaxe's IP address:

python bitaxe_hashrate_benchmark.py <bitaxe_ip>
Optional parameters:

-v, --voltage: Initial voltage in mV (default: 1150)
-f, --frequency: Initial frequency in MHz (default: 500)
Example:

python bitaxe_hashrate_benchmark.py 192.168.2.29 -v 1175 -f 775

try it out, i moved my bitaxe gamma from 1.2 to 1.6 THs

Best regards,
Willi

[Nexus9090]

Hello all,

for some bitaxe user here, maybe the tuning script is nice to know.

https://github.com/mrv777/Bitaxe-Hashrate-Benchmark/

you can auto tune the speed parameter to the best value.


Standard Usage
Run the benchmark tool by providing your Bitaxe's IP address:

python bitaxe_hashrate_benchmark.py <bitaxe_ip>
Optional parameters:

-v, --voltage: Initial voltage in mV (default: 1150)
-f, --frequency: Initial frequency in MHz (default: 500)
Example:

python bitaxe_hashrate_benchmark.py 192.168.2.29 -v 1175 -f 775

try it out, i moved my bitaxe gamma from 1.2 to 1.6 THs

Best regards,
Willi

Hi Willi,

What was the impact on the thermal performance by doing this?

I've noticed even small variation in the voltage and frequency can make a big difference to the temperatures

[willi9974]

here you can see the result in the output file

Code:

{
    "all_results": [
        {
            "coreVoltage": 1200,
            "frequency": 500,
            "averageHashRate": 1068.7433816410835,
            "averageTemperature": 58.875,
            "efficiencyJTH": 16.373390982033694,
            "averageVRTemp": 56.85294117647059
        },
        {
            "coreVoltage": 1200,
            "frequency": 525,
            "averageHashRate": 1097.4952820585274,
            "averageTemperature": 59.900735294117645,
            "efficiencyJTH": 16.660036003791102,
            "averageVRTemp": 58.26470588235294
        },
        {
            "coreVoltage": 1200,
            "frequency": 550,
            "averageHashRate": 1112.6847881649462,
            "averageTemperature": 59.93014705882353,
            "efficiencyJTH": 16.993235483345593,
            "averageVRTemp": 59.0
        },
        {
            "coreVoltage": 1200,
            "frequency": 575,
            "averageHashRate": 1182.6847802864986,
            "averageTemperature": 60.0514705882353,
            "efficiencyJTH": 16.48607775880052,
            "averageVRTemp": 59.029411764705884
        },
        {
            "coreVoltage": 1200,
            "frequency": 600,
            "averageHashRate": 1196.0301857114296,
            "averageTemperature": 60.0110294117647,
            "efficiencyJTH": 16.81744031217841,
            "averageVRTemp": 59.64705882352941
        },
        {
            "coreVoltage": 1200,
            "frequency": 625,
            "averageHashRate": 1258.7227051137786,
            "averageTemperature": 60.169117647058826,
            "efficiencyJTH": 16.43608753417213,
            "averageVRTemp": 60.0
        },
        {
            "coreVoltage": 1200,
            "frequency": 650,
            "averageHashRate": 1247.796911235849,
            "averageTemperature": 60.16544117647059,
            "efficiencyJTH": 17.048120548733397,
            "averageVRTemp": 60.088235294117645
        },
        {
            "coreVoltage": 1200,
            "frequency": 675,
            "averageHashRate": 1345.6776697517125,
            "averageTemperature": 61.099264705882355,
            "efficiencyJTH": 16.394826703966512,
            "averageVRTemp": 62.0
        },
        {
            "coreVoltage": 1200,
            "frequency": 700,
            "averageHashRate": 1433.4348264590255,
            "averageTemperature": 62.51470588235294,
            "efficiencyJTH": 16.024988330952983,
            "averageVRTemp": 64.08823529411765
        },
        {
            "coreVoltage": 1200,
            "frequency": 725,
            "averageHashRate": 1444.9782885109375,
            "averageTemperature": 63.85294117647059,
            "efficiencyJTH": 16.518999531334064,
            "averageVRTemp": 66.8529411764706
        },
        {
            "coreVoltage": 1200,
            "frequency": 750,
            "averageHashRate": 1608.9718564286434,
            "averageTemperature": 65.14338235294117,
            "efficiencyJTH": 15.406707482912237,
            "averageVRTemp": 69.1470588235294
        }
    ],
    "top_performers": [
        {
            "rank": 1,
            "coreVoltage": 1200,
            "frequency": 750,
            "averageHashRate": 1608.9718564286434,
            "averageTemperature": 65.14338235294117,
            "efficiencyJTH": 15.406707482912237,
            "averageVRTemp": 69.1470588235294
        },
        {
            "rank": 2,
            "coreVoltage": 1200,
            "frequency": 725,
            "averageHashRate": 1444.9782885109375,
            "averageTemperature": 63.85294117647059,
            "efficiencyJTH": 16.518999531334064,
            "averageVRTemp": 66.8529411764706
        },
        {
            "rank": 3,
            "coreVoltage": 1200,
            "frequency": 700,
            "averageHashRate": 1433.4348264590255,
            "averageTemperature": 62.51470588235294,
            "efficiencyJTH": 16.024988330952983,
            "averageVRTemp": 64.08823529411765
        },
        {
            "rank": 4,
            "coreVoltage": 1200,
            "frequency": 675,
            "averageHashRate": 1345.6776697517125,
            "averageTemperature": 61.099264705882355,
            "efficiencyJTH": 16.394826703966512,
            "averageVRTemp": 62.0
        },
        {
            "rank": 5,
            "coreVoltage": 1200,
            "frequency": 625,
            "averageHashRate": 1258.7227051137786,
            "averageTemperature": 60.169117647058826,
            "efficiencyJTH": 16.43608753417213,
            "averageVRTemp": 60.0
        }
    ],
    "most_efficient": [
        {
            "rank": 1,
            "coreVoltage": 1200,
            "frequency": 750,
            "averageHashRate": 1608.9718564286434,
            "averageTemperature": 65.14338235294117,
            "efficiencyJTH": 15.406707482912237,
            "averageVRTemp": 69.1470588235294
        },
        {
            "rank": 2,
            "coreVoltage": 1200,
            "frequency": 700,
            "averageHashRate": 1433.4348264590255,
            "averageTemperature": 62.51470588235294,
            "efficiencyJTH": 16.024988330952983,
            "averageVRTemp": 64.08823529411765
        },
        {
            "rank": 3,
            "coreVoltage": 1200,
            "frequency": 500,
            "averageHashRate": 1068.7433816410835,
            "averageTemperature": 58.875,
            "efficiencyJTH": 16.373390982033694,
            "averageVRTemp": 56.85294117647059
        },
        {
            "rank": 4,
            "coreVoltage": 1200,
            "frequency": 675,
            "averageHashRate": 1345.6776697517125,
            "averageTemperature": 61.099264705882355,
            "efficiencyJTH": 16.394826703966512,
            "averageVRTemp": 62.0
        },
        {
            "rank": 5,
            "coreVoltage": 1200,
            "frequency": 625,
            "averageHashRate": 1258.7227051137786,
            "averageTemperature": 60.169117647058826,
            "efficiencyJTH": 16.43608753417213,
            "averageVRTemp": 60.0
        }
    ]
}

[Nexus9090]

here you can see the result in the output file

Thank you.

I think you must have a better heat-sink than is fitted on my BitAxe Gamma. My temps seem to be 5-10C more than yours.

[willi9974]

here you can see the result in the output file

Thank you.

I think you must have a better heat-sink than is fitted on my BitAxe Gamma. My temps seem to be 5-10C more than yours.

i have the standard heat sink, but i have replaced the thermal paste, with a new one.

[willi9974]

Dlaczego moje dane z koparek zostały zresetowane?

Please Write in english

Ckpool lost from usa Server a harddisk on that was all the Statistik data, so usa Pool Stars, reset to Zero
You can read and ask here the Pool Owner https://bitcointalk.org/index.php?topic=5237323.msg65968090#msg65968090