Claymore XPM GPU Miner discussion

[urubu]

am i in the right way ??

Look at the graphs in afterburner.  It looks like your cards are throttling.  You should turn up powertune to +20.  You can probably overclock the core speed a bit too.



Claymore, will there be an update before the difficulty hits 11 to tune for the 11 chains?

[zikomoto]

am i in the right way ??

Look at the graphs in afterburner.  It looks like your cards are throttling.  You should turn up powertune to +20.  You can probably overclock the core speed a bit too.



Claymore, will there be an update before the difficulty hits 11 to tune for the 11 chains?

how can i set powertune to 20 , i don't see any option with this name

[urubu]

It is the power limit % slider in afterburner.

[zikomoto]

It is the power limit % slider in afterburner.

ok now just 1 gpu is throttling , but still 2.6 2.7 cpd

[smtn512]

Absolutely, I have 5 msi 7790s on claymore v8 right now, 3 solo and 2 on ypool. They are each getting ~64000 4ch/hr, and estimated 1.95 CPD. With 3 of them solo for the past 40 hours or so I've mined 2 blocks so far. Not officially supported but they work more than well IMO. My clocks are set to 1050/1000

I'm using msi too, just tried with default clocks for 2 hours, I'm getting 69000 4ch/hr, 1.98 CPD and still crawling up.
set the memory down not affecting mining speed?

My stats are virtually the same as yours, I just have 1 card that works a little slower and 10c hotter than the rest, my 4ch/hr is around 69000 for all the other cards. Clocking down memory does not appear to affect the work produced, just saves a little power and reduces heat. Although... I haven't hit another solo block since I dropped the memclock, I'm gonna believe that's just the luck factor right now. Watt usage seems to be around 75w/card.

[bclcjunkie]

difficulty is bitch... no blocks since yesterday.... 

[Claymore]

v9.0 is available:

- Improved speed by about 10-15% (depends on card type). Up to 7.7 CPD on a single 290X.
- Added multigpu support (for example, "-di 0123").

This version is for Diff 10. In 1-2 days I will release version for Diff 11.

[jgle]

v9.0 is available:

- Improved speed by about 10-15% (depends on card type). Up to 7.7 CPD on a single 290X.
- Added multigpu support (for example, "-di 0123").

This version is for Diff 10. In 1-2 days I will release version for Diff 11.

3X280x how to set? As long as the operation of a bat? (-id 012)

[jgle]

3X280X  13.12  1150/1500



Total/Valid shares: [ 33 / 33 ]  -  Max diff: 9.688065
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [    39K] [     30] [      3] [      1] [      0] [      0] [      0]
  ch/h: [ 523080] [401.720] [ 40.172] [ 13.391] [  0.000] [  0.000] [  0.000]
Estimated CPD: 16.3929, Average CPD:  0.0000, Mining time: 00:04

Detailed stats mode disabled
Detailed stats mode enabled

Total/Valid shares: [ 34 / 34 ]  -  Max diff: 9.688065
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [    39K] [     30] [      3] [      1] [      0] [      0] [      0]
  ch/h: [ 522935] [397.538] [ 39.754] [ 13.251] [  0.000] [  0.000] [  0.000]
Estimated CPD: 16.4203, Average CPD:  0.0000, Mining time: 00:04

05/14/14-17:03:05 - SHARE FOUND! - (GPU  1) - DIFF:8.373178 - TYPE:1
05/14/14-17:03:09 - SHARE FOUND! - (GPU  1) - DIFF:7.710232 - TYPE:2

[slimdim]

2*280x vapor-x
1*5770

New Block: 543375 - Current Diff: 10.947311,   GPU CNT: 3
Estimated CPD: 10.7793, Average CPD:  0.0000, Mining time: 00:10
05/14/14-13:05:13 - SHARE FOUND! DIFF:7.894100
05/14/14-13:05:36 - SHARE FOUND! DIFF:7.572854
05/14/14-13:05:42 - SHARE FOUND! DIFF:7.654802
05/14/14-13:05:44 - SHARE FOUND! DIFF:7.556091
Detailed stats mode enabled

Total/Valid shares: [ 66 / 65 ]  -  Max diff: 9.503026
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [    69K] [     58] [      7] [      1] [      0] [      0] [      0]
  ch/h: [ 365910] [306.289] [ 36.966] [  5.281] [  0.000] [  0.000] [  0.000]
Estimated CPD: 10.7922, Average CPD:  0.0000, Mining time: 00:11

Detailed stats mode disabled

[Strannik-74]

5x7950 V9 began jumping loading

[topnetdeal]

Why You have 5 Instance's for V9 ? Run only 1 with -di 01234.

[Strannik-74]

powerlimit 0, loading stabilized

[jgle]

Why You have 5 Instance's  V9 ? Run only 1 with -di 01234.

yes

[SpeedDemon13]

2*280x vapor-x
1*5770

New Block: 543375 - Current Diff: 10.947311,   GPU CNT: 3
Estimated CPD: 10.7793, Average CPD:  0.0000, Mining time: 00:10
05/14/14-13:05:13 - SHARE FOUND! DIFF:7.894100
05/14/14-13:05:36 - SHARE FOUND! DIFF:7.572854
05/14/14-13:05:42 - SHARE FOUND! DIFF:7.654802
05/14/14-13:05:44 - SHARE FOUND! DIFF:7.556091
Detailed stats mode enabled

Total/Valid shares: [ 66 / 65 ]  -  Max diff: 9.503026
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [    69K] [     58] [      7] [      1] [      0] [      0] [      0]
  ch/h: [ 365910] [306.289] [ 36.966] [  5.281] [  0.000] [  0.000] [  0.000]
Estimated CPD: 10.7922, Average CPD:  0.0000, Mining time: 00:11

Detailed stats mode disabled

Surprised that the 5770 even works with the miner.

[Claymore]

2*280x vapor-x
1*5770

New Block: 543375 - Current Diff: 10.947311,   GPU CNT: 3
Estimated CPD: 10.7793, Average CPD:  0.0000, Mining time: 00:10
05/14/14-13:05:13 - SHARE FOUND! DIFF:7.894100
05/14/14-13:05:36 - SHARE FOUND! DIFF:7.572854
05/14/14-13:05:42 - SHARE FOUND! DIFF:7.654802
05/14/14-13:05:44 - SHARE FOUND! DIFF:7.556091
Detailed stats mode enabled

Total/Valid shares: [ 66 / 65 ]  -  Max diff: 9.503026
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [    69K] [     58] [      7] [      1] [      0] [      0] [      0]
  ch/h: [ 365910] [306.289] [ 36.966] [  5.281] [  0.000] [  0.000] [  0.000]
Estimated CPD: 10.7922, Average CPD:  0.0000, Mining time: 00:11

Detailed stats mode disabled

Surprised that the 5770 even works with the miner.

It was detected but probably it does not work.

[slimdim]

it work - GPU load 99% on 5770

Cards available: 3
GPU #2: name: Juniper, 1024 MB available, 10 units
Total: 1

Total/Valid shares: [ 0 / 0 ]  -  Max diff: 0.000000
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [     0K] [      0] [      0] [      0] [      0] [      0] [      0]
  ch/h: [  18042] [  0.000] [  0.000] [  0.000] [  0.000] [  0.000] [  0.000]
Estimated CPD:  0.6021, Average CPD:  0.0000, Mining time: 00:01

05/14/14-16:05:24 - SHARE FOUND! DIFF:7.806778

[Claymore]

it work - GPU load 99% on 5770

Cards available: 3
GPU #2: name: Juniper, 1024 MB available, 10 units
Total: 1

Total/Valid shares: [ 0 / 0 ]  -  Max diff: 0.000000
        [    4ch] [    7ch] [    8ch] [    9ch] [   10ch] [   11ch] [   12ch]
 Total: [     0K] [      0] [      0] [      0] [      0] [      0] [      0]
  ch/h: [  18042] [  0.000] [  0.000] [  0.000] [  0.000] [  0.000] [  0.000]
Estimated CPD:  0.6021, Average CPD:  0.0000, Mining time: 00:01

05/14/14-16:05:24 - SHARE FOUND! DIFF:7.806778

Hmm, it really works

[WINNIE_POOL]

Claymore, tks for new version.

I just test with 5x797 and 5x795 with di -01234 and I see:
7970: When start, trt point for 5 card is 15x, but after 5 minutes it is 19x or above (slower).
7950: When start, trt point for 5 card is 18x, but after 5 minutes it is 22x or above (slower).

Please test and fix it.

[Claymore]

Claymore, tks for new version.

I just test with 5x797 and 5x795 with di -01234 and I see:
7970: When start, trt point for 5 card is 15x, but after 5 minutes it is 19x or above (slower).
7950: When start, trt point for 5 card is 18x, but after 5 minutes it is 22x or above (slower).

Please test and fix it.

Looks like throttling, I don't see such thing on my cards.