Claymore XPM GPU Miner discussion

[WINNIE_POOL]

Claymore, tks for new version.

I just test with 5x797 and 5x795 with di -01234 and I see:
7970: When start, trt point for 5 card is 15x, but after 5 minutes it is 19x or above (slower).
7950: When start, trt point for 5 card is 18x, but after 5 minutes it is 22x or above (slower).

Please test and fix it.

Looks like throttling, I don't see such thing on my cards.

Speed TRT is slower and increase after several minutes. I test on 3 my grids and same result.

[topnetdeal]

It's problem with Your Hardware, or Drivers. I have 135 for 7970, and 210 with 3xR9270X.

[gilad215]

Can anyone tell me how much watts their 280x, 290 draw from the wall in v9?

[ozzy1926]

Can anyone tell me how much watts their 280x, 290 draw from the wall in v9?

3x290 1100 watts from the wall same as scrypt

[gilad215]

Can anyone tell me how much watts their 280x, 290 draw from the wall in v9?

3x290 1100 watts from the wall same as scrypt

same as scrypt?! you using powertune?
it should be using less voltage and be cooler.

any other?

[zikomoto]

3x 7950 with 9.0 cpd , gpus keep throttling with power limit +20% :/

[csa1234]

no problems at all with R9 280x Sapphire Toxic and MSI Gaming OC

CPD per card is: 5.24

with V8 CPD was 5.24 also, so no change, only good change is i only need to run one instance of the miner to get all my GPUs working

[gilad215]

just changed powertune from +20% to -10%, TRT are a bit jumping but still same CPD (maybe 0.05cpd change in each card).

Claymore, can you tell us more about the electricity savings in the nofee option?

[iLiekPai]

I have asus dc2t r9 280x and powercolor r9 270 - the 280x is running nice on the new 9.0v, but the r9 270 is BSODing the moment I run the program. This is happening even at stock clocks, 8.0v is running fine for it.

edit : I'm with drivers 14.4

[Romulo]

Ok im seeing Total/Valid blocks 1 / 1 now. So I found a block?

Still no change in wallet balance though, maybe it takes a while to update?

Edit: i'm using Claymore solo edition wallet but in readme it now says: 1. Use official Primecoin wallet with this miner. Should I switch?

[zikomoto]

wtff i'm only getting 3 cpd per cardd , all is good , any suggestions plz

[WINNIE_POOL]

With saphire 7950 core/mem: 1050/1250 I have only 3 CPD

[zikomoto]

With saphire 7950 core/mem: 1050/1250 I have only 3 CPD

me too , but it should be 4 cpd min for v9

[topnetdeal]

Maybe slow and overload CPU ? If yes, try -ss 3. I have 3 x 270X with Sempron 140 and on -ss 3 CPD=11, it's 3.67 for one card.
Catalyst 13.12, clock's 1200 engine / 1200 memory, GPU 3 x MSI R9 270X Lightning.

[zikomoto]

Maybe slow and overload CPU ? If yes, try -ss 3. I have 3 x 270X with Sempron 140 and on -ss 3 CPD=11, it's 3.67 for one card.
Catalyst 13.12, clock's 1200 engine / 1200 memory, GPU 3 x MSI R9 270X Lightning.

Ty that's a bit better i was using -ss2 but my proc is very slow , but how about throttling , powerlimit is at 20 it should'nt throttle

[Claymore]

Ok im seeing Total/Valid blocks 1 / 1 now. So I found a block?

Still no change in wallet balance though, maybe it takes a while to update?

Edit: i'm using Claymore solo edition wallet but in readme it now says: 1. Use official Primecoin wallet with this miner. Should I switch?

Use ONLY official standard wallet.

[fudge]

powerlimit is at 20 it should'nt throttle

what is powerlimit actually doing?

[zikomoto]

powerlimit is at 20 it should'nt throttle

what is powerlimit actually doing?

i think it's letting the gpu drawing 20% + power to work for long durations with maximum capacity , but it's not working for me , gpus are still throttling

[Strannik-74]

On most GPUs triggered throttling v9, no settings do not help, I do not know what to do = (

[kev7112001]

5 blocks today with 4 cards v8 solo