PiMP OS is the fastest and easiest way to mine ALL crypto currencies!

[badman74]

Love this OS, don't understand why there isn't more activity going on here.

Badman, are the install instructions for your branch still good for the new 1.5.6?

use sgminer5 that is now bundled with pimp, my branch hasn't been updated for some time

[Undland]

Every day my sgminer5 is turning off one or two times. How i can configure PIMP to automatically start it?

[fran2k]

Every day my sgminer5 is turning off one or two times. How i can configure PIMP to automatically start it?

To list the available algo miners type:

Code:

mcontrol switch

Look the number for sgminer 5, then type

Code:

mcontrol switch (number)
mine restart

And the miner will start, next time you reboot the system, same miner will start.

[Undland]

To list the available algo miners type:

Code:

mcontrol switch

Look the number for sgminer 5, then type

Code:

mcontrol switch (number)
mine restart

And the miner will start, next time you reboot the system, same miner will start.

Just type in terminal or edit some file?

[jtostenr]

I've had trouble getting PIMP to work in the past but got 1.5.6 up and running in no time. My issue previously may have been a UEFI setting in bios but not sure. Anyway, it's working great now and the 50% boost in hashrate is very nice.

I used SMOS in the past and loved the extensive Munin stats. Any possibility of getting something similar in PIMP? At least extending the charts to 30 days would be nice.

[GunPowder]

Sorry, 1.5.6 is bu***hit release:

Code:

http://______ |__| _____ ______  Portable Instant Mining Platform
\____ \|  |/     \____ \     Pimp Version 1.5.6
|  |_> >  |  Y Y  \  |_> >  ATI Catalyst: 14.6
|   __/|__|__|_|  /   __/   Support: #PiMP on FreenodeIRC
|__|            \/|__|           http://getPiMP.org
Type pimp for a list of pimp console shortcuts and commands
CPU: AMD FX(tm)-4300 Quad-Core Processor
Cores: 4 @ 3817 Mhz Memory: 4 GB
Miner not started - Stats Unavailable.
Last login: Fri Jul 25 16:00:42 2014 from 192.168.1.2
[ GPU Status: Miner not running]
[04:15 PM][Uptime: 6 min][root@darkminer2(192.168.1.102)]

[/root]:# /opt/sgminer5/sgminer -c /opt/ifmi/sgminer.x11.conf -T
[16:15:53] Started sgminer 4.2.2-283-g3ddff                    
[16:15:53] * using Jansson 2.6                    
[16:15:53] Loaded configuration file /opt/ifmi/sgminer.x11.conf                    
[16:15:54] Probing for an alive pool                    
[16:15:55] Switching to NH x11 - first alive pool                    
[16:15:55] Startup GPU initialization... Using settings from pool NH x11.                    
[16:15:55] Startup Pool No = 4                    
[16:15:55] Building binary darkcoin-modTahitigw64l4.bin                    
[16:15:56] CK x11 alive, testing stability                    
[16:15:56] Switching MRR x11-2 to stratum+tcp://us-east01.miningrigrentals.com:50032                    
[16:15:56] Switching MRR x11-1 to stratum+tcp://eu-01.miningrigrentals.com:50033                    
[16:15:57] TMB x11 alive, testing stability                    
[16:15:57] MRR x11-2 alive, testing stability                    
[16:15:57] MRR x11-1 alive, testing stability                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:17] API running in IP access mode on port 4028 (4)                    
[16:16:31] Accepted Coin 1993 Diff 0.352/0.100 GPU 3 at MRR x11-1                     
Segmentation fault13.88Mh/s | A:0  R:0  HW:0  WU:0.199/m          
[ GPU Status: Miner not running]
[04:16 PM][Uptime: 7 min][root@darkminer2(192.168.1.102)]
[/root]:#

This happens with included sgminer5 as well as with latest version from git.

1.4.2 is the best for now..

[fran2k]

To list the available algo miners type:

Code:

mcontrol switch

Look the number for sgminer 5, then type

Code:

mcontrol switch (number)
mine restart

And the miner will start, next time you reboot the system, same miner will start.

Just type in terminal or edit some file?

Yes.

Sorry, 1.5.6 is bu***hit release:

Code:

http://______ |__| _____ ______  Portable Instant Mining Platform
\____ \|  |/     \____ \     Pimp Version 1.5.6
|  |_> >  |  Y Y  \  |_> >  ATI Catalyst: 14.6
|   __/|__|__|_|  /   __/   Support: #PiMP on FreenodeIRC
|__|            \/|__|           http://getPiMP.org
Type pimp for a list of pimp console shortcuts and commands
CPU: AMD FX(tm)-4300 Quad-Core Processor
Cores: 4 @ 3817 Mhz Memory: 4 GB
Miner not started - Stats Unavailable.
Last login: Fri Jul 25 16:00:42 2014 from 192.168.1.2
[ GPU Status: Miner not running]
[04:15 PM][Uptime: 6 min][root@darkminer2(192.168.1.102)]

[/root]:# /opt/sgminer5/sgminer -c /opt/ifmi/sgminer.x11.conf -T
[16:15:53] Started sgminer 4.2.2-283-g3ddff                    
[16:15:53] * using Jansson 2.6                    
[16:15:53] Loaded configuration file /opt/ifmi/sgminer.x11.conf                    
[16:15:54] Probing for an alive pool                    
[16:15:55] Switching to NH x11 - first alive pool                    
[16:15:55] Startup GPU initialization... Using settings from pool NH x11.                    
[16:15:55] Startup Pool No = 4                    
[16:15:55] Building binary darkcoin-modTahitigw64l4.bin                    
[16:15:56] CK x11 alive, testing stability                    
[16:15:56] Switching MRR x11-2 to stratum+tcp://us-east01.miningrigrentals.com:50032                    
[16:15:56] Switching MRR x11-1 to stratum+tcp://eu-01.miningrigrentals.com:50033                    
[16:15:57] TMB x11 alive, testing stability                    
[16:15:57] MRR x11-2 alive, testing stability                    
[16:15:57] MRR x11-1 alive, testing stability                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:17] API running in IP access mode on port 4028 (4)                    
[16:16:31] Accepted Coin 1993 Diff 0.352/0.100 GPU 3 at MRR x11-1                     
Segmentation fault13.88Mh/s | A:0  R:0  HW:0  WU:0.199/m          
[ GPU Status: Miner not running]
[04:16 PM][Uptime: 7 min][root@darkminer2(192.168.1.102)]
[/root]:#

This happens with included sgminer5 as well as with latest version from git.

1.4.2 is the best for now..

A friend had a lot of problems with 1.5.6 and rolled back to 1.4.* also.  I´m doing fine with 1.5.5.1 and 1.5.6. But I´m having less uptime than with 1.4.2, did not figured yet what´s the problem.

[dragonmike]

I've just setup a cron job to reboot every 6 hours.
I think it's only Sgminer5 that's unstable.

[spotnik666]

Sorry, 1.5.6 is bu***hit release:

Code:

http://______ |__| _____ ______  Portable Instant Mining Platform
\____ \|  |/     \____ \     Pimp Version 1.5.6
|  |_> >  |  Y Y  \  |_> >  ATI Catalyst: 14.6
|   __/|__|__|_|  /   __/   Support: #PiMP on FreenodeIRC
|__|            \/|__|           http://getPiMP.org
Type pimp for a list of pimp console shortcuts and commands
CPU: AMD FX(tm)-4300 Quad-Core Processor
Cores: 4 @ 3817 Mhz Memory: 4 GB
Miner not started - Stats Unavailable.
Last login: Fri Jul 25 16:00:42 2014 from 192.168.1.2
[ GPU Status: Miner not running]
[04:15 PM][Uptime: 6 min][root@darkminer2(192.168.1.102)]

[/root]:# /opt/sgminer5/sgminer -c /opt/ifmi/sgminer.x11.conf -T
[16:15:53] Started sgminer 4.2.2-283-g3ddff                    
[16:15:53] * using Jansson 2.6                    
[16:15:53] Loaded configuration file /opt/ifmi/sgminer.x11.conf                    
[16:15:54] Probing for an alive pool                    
[16:15:55] Switching to NH x11 - first alive pool                    
[16:15:55] Startup GPU initialization... Using settings from pool NH x11.                    
[16:15:55] Startup Pool No = 4                    
[16:15:55] Building binary darkcoin-modTahitigw64l4.bin                    
[16:15:56] CK x11 alive, testing stability                    
[16:15:56] Switching MRR x11-2 to stratum+tcp://us-east01.miningrigrentals.com:50032                    
[16:15:56] Switching MRR x11-1 to stratum+tcp://eu-01.miningrigrentals.com:50033                    
[16:15:57] TMB x11 alive, testing stability                    
[16:15:57] MRR x11-2 alive, testing stability                    
[16:15:57] MRR x11-1 alive, testing stability                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:11] Initialising kernel darkcoin-mod.cl with bitalign, unpatched BFI, nfactor 10, n 1024                    
[16:16:17] API running in IP access mode on port 4028 (4)                    
[16:16:31] Accepted Coin 1993 Diff 0.352/0.100 GPU 3 at MRR x11-1                     
Segmentation fault13.88Mh/s | A:0  R:0  HW:0  WU:0.199/m          
[ GPU Status: Miner not running]
[04:16 PM][Uptime: 7 min][root@darkminer2(192.168.1.102)]
[/root]:#

This happens with included sgminer5 as well as with latest version from git.

1.4.2 is the best for now..

Personally I have no issues with v 1.5.6, however you can always check out the wiki page http://wiki.getpimp.org/wiki/Home or join the #pimp on irc to find solutions for your issue.

[Wopin]

Someone can mine scrypt jane (ChaCha) with this distro??

im trying with the miner that include but never mine.

Can anyone help me??

[bradli]

do you get more hashes with sgminer-multialgo 1.5.7
x11
280x-4.2mh
290-5mh
290x-5.2mh
 

[yginesta]

I am having this issue and I cant figure out why. I am downloading the image from the website and then using Win32disk to make my USB. I have tried 2 USB drives and a portable USB HDD. Gives me the error no matter what. Any help would be greatly appreciated.

http://i99.photobucket.com/albums/l309/yginesta/image1_zps624cf3d6.jpg

[DonQuijote]

I am having this issue and I cant figure out why. I am downloading the image from the website and then using Win32disk to make my USB. I have tried 2 USB drives and a portable USB HDD. Gives me the error no matter what. Any help would be greatly appreciated.

[IMG]http://i99.photobucket.com/albums/l309/yginesta/image1_zps624cf3d6.jpg[img]

Could you try another linux distribution to verify that your computer allows compatible?

[h.robak]

How can I change desktop resolution to 1280x1024?

[cryptouser]

Thank you very much for PiMP ! Excellent work !

[DonQuijote]

How can i install 1oneminer?? ( https://bitcointalk.org/index.php?topic=820302.0 )

[DonQuijote]

How can i install 1oneminer?? ( https://bitcointalk.org/index.php?topic=820302.0 )

I used:

linux binary don't work  

linux build

Code:

sudo apt-get install libssl-dev libdb-dev libdb++-dev make cmake automake libboost-all-dev build-essential git libcurl4-openssl-dev pkg-config libtool libncurses5-dev

git clone https://bitbucket.org/1coin/1coin-sgminer3s/src.git sgminer3s
cd sgminer3s
autoreconf -i
CFLAGS="-O2 -Wall -march=native" ./configure
make

Add sgminer3s to poolmanager and create a new sgminer3.conf

[Melupira89]

Hello everyone, I apologize in advance for my English Googled, I have a problem with the installation of any version of pimp, I used bamt and I had had a great time with this PIMP, then I wanted to upgrade my version 1.5.6. with that before 1.7.0 and 1.6.0. and then gives me this when I start the rig :

GRUB loading
Welcome to GRUB

error:unknown filesystem
entering rescue mode...
grub rescue


is a driver issue? Thank you for your attention

[grizscom]

This mean broken FS at flash.
Redownload img and check its md5sum.
But it took a much time, the speed is 16kB/s.

[Melupira89]

This mean broken FS at flash.
Redownload img and check its md5sum.
But it took a much time, the speed is 16kB/s.

excuse me if I say inaccuracies ..... do you mean by FS? are still inexperienced, type md5sum that means?

I have downloaded all files img all kinds of OS pimp, with all types of drivers, are willing to try them all, just that I can start it, I'm getting nervous because it worked fine until last week now seems an ordeal